linux-deblob/2.6.24-libre/deblob-check

#! /bin/sh

# deblob-check version 2008-03-29 $Rev: 3476 $
# Inspired in gNewSense's find-firmware script.
# Written by Alexandre Oliva <lxoliva@fsfla.org>

# Check http://www.fsfla.org/svn/fsfla/software/linux-libre for newer
# versions.

# Copyright (C) 2008 Alexandre Oliva
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
# USA


# usage: deblob-check [-S] [-vv] [-s S] [-lDdBbCcXxPpFftVh?H] \
#        [*.tar* patch-* *.patch]

# Look for too-long undocumented sequences of numbers (generally blobs
# in disguise) in source files.

# The order of command line flags is significant.  Flags given out of
# the order above won't be handled correctly, sorry.

# -s --sensitivity: must be followed by a blank and a number.
#		Specifies the number of consecutive integral or
#		character constants that trigger the blob detector.

# The default sensitivity is 32 constants.

# The sensitivity, if present, must be the first option.  The action
# selection, if present, must be the first argument, except for the
# sensitivity and verbosity.

# The default can be overridden with one of:

# -l --list-blobs: list files that contain sequences that match the
#		blob detector test and that are not known to be false
#		positives.  This is the default option.

# -d --deblob --mark-blobs: print the processed input, replacing
#		sequences that match the blob detector test and that
#		are NOT known to be false positives with
#		/*(DEBLOBBED)*/.

# -D --cat: print the processed input, as it would have been fed to
#		the blob detector script.  Use -S to save the sed
#		script used to process it, and search for `sedcat:' in
#		comments to locate the relevant adaptation points.

# -b --print-marked-blobs: like -d, but print only the matching
#		sequences.

# -B --print-blobs: like -b, but do not deblob the sequences.

# -c --print-marked-blobs-with-context: like -b, but try to maximize
#		the context around the blobs.  This maximization will
#		sometimes disregard known false positives, if they
#		happen to be contained within the extended match.
#		This is probably an indication that the false positive
#		matching rule could be improved.

# -C --print-blobs-with-context: like -B, but try to maximize the
#		context around the blobs.

# -X --print-all-matches: print all blobs, be they known false
#		positives or blobs.

# -x --list-all-matches: list files that contain sequences that appear
#		to be blobs, be they known false positives or not.

# -p --mark-false-positives: print the processed input, replacing
#		sequences that match the blob detector test, but that
#		are known to be false positives, with /*(DEBLOBBED)*/.

# -P --list-false-positives: list files that contain false positives.

# -f --print-marked-false-positives: like -p, but print only the
#		matching sequences.

# -F --print-false-positives: like -f, but do not deblob the sequences.

# -t --test: run (very minimal) self-test.

# -V --version: print a version number

# -h -? -H --help: print short or long help message


# debugging options:

# -S --save-scripts: save scripts and temporary files.

# -v --verbose: increase verbosity level, for internal debugging.  May
#		be given at most twice.

# The exit status is only significant for the --list options: it will
# be true if nothing was found, and false otherwise.

: # Mark the end of the help message.

# TODO:

# - Improve handling of command-line arguments, so as to not make the
# order relevant.

# - Add an option for the user to feed their own false positive
# patterns.

# - Add support to recognize known blobs (or other non-Free
# signatures, really), to speed up the scanning of files containing
# blobs, and to avoid attempts to disguise blobs.

# - Factor out the code in the various print_* and list_* parts of the
# sed script, at least in the shell sources.  Make sure they're all
# included and expanded in a saved --cat script though.

# - Add support for file name tagging in patterns, such that blobs or
# false positives are recognized only when handling the specific
# filename, be it stand-alone, as part of a patch or a tarball.  This
# should help avoid recognition of actual blobs as false positives
# just because there's a symbol with a different name elsewhere.

#   It is convenient that the patterns provided by the user to
# recognize file names can be empty (for backward compatibility), but
# this should ideally be phased out in favor of more precise matches.
# It's important that files can be recognized with leading tarball or
# patch names, that the filename used within the tarball contain
# leading garbage, and even that a partial pathname be recognizable
# (say recognize drivers/net/whatever.c when the input file is named
# ../net/whatever.c).

#   Rather than using regular expressions to recognize multiple files
# it's convenient (but not quite essential) that filename patterns be
# specifiable as regular expressions, rather than simple filenames,
# but there are other ways around this.

#   Maintaining begin/end markers in a stack-like fashion as part of
# the processed stream, and using the names in them as (optional) part
# of the recognition patterns, would enable us to do it.

#   Introducing annotations next to the false positives (and recognized
# blobs) as an early part of the process may speed things up and
# enable fast processing, but how to introduce the annotations quickly
# in the first place?  Given patterns such as

#   \(\(file1\)\(.*\)\(pat1\)\|\(file2\)\(.*\)\(pat2\)\|...\)

# how do we get sed to introduce a marker that contains file2 right
# before or right after pat2, without turning a big efficient regexp
# into a slowish sequence of s/// commands?

# - Re-check and narrow false-positive patterns to make sure they
# apply only to the relevant content.

# - Scripting abilities, so as to be able to automate the removal of
# source files or of blobs from source files in a tarball without
# having to extract the entire tarball (as in tar --update/--delete)
# would be nice.  Carrying over removed files automatically into
# patches would also be great, and this sort of script would be
# perfect to document what has been done to a tarball plus a set of
# patches.  Something like deblob.script:
#
#   tarball linux-2.6.24.tar.bz2
#   delete net/wireloss/freedom.c drivers/me/crazy.c
#   deblob include/linux/slab-blob-kfree.h
#   deconfig drivers/char/drm DRM_IS_BAD
#
#   patch patch-2.6.25-rc7.bz2
#   delete arch/power/over/you.c

# such that the deletes from an earlier file would carry over into the
# subsequent ones, and new tarballs and patch files would be generated
# with the libre- prefix in their basename, and the xdeltas between
# the original files and the modified files would be minimal, and
# redundant with this script and the input script while at that.

# - Improve documentation of the code.

# - Write a decent testsuite.

# - Insert your idea here. :-)

# Yeah, lots of stuff to do.  Want to help?

# This makes it much faster, and mostly immune to non-ASCII stuff, as
# long as a 8-bit-safe sed is used.  Probably a safe assumption these
# days.
case ${LANG+set} in set) LANG=C; export LANG;; esac

rm="rm -f"
case $1 in
--save-scripts | -S)
  shift
  rm="echo preserving"
  ;;
esac

# Choose verbosity level for sed script debugging and performance
# analysis.
case $1 in
--verbose | -v)
  shift
  case $1 in
  --verbose | -v)
    shift
    v="i\\
:
p;
i\\
"
    ;;
  *)
    v="P;i\\
"
    ;;
  esac
  ;;
*) 
  v="# "
  ;;
esac

sens=31 # 32 - 1
case $1 in
--sensitivity | -s)
  sens=$2;
  shift 2 || exit 1

  if test "$sens" -gt 0 2>/dev/null; then
    :
  else
    echo invalid sensitivity: $sens >&2
    exit 1
  fi

  sens=`expr $sens - 1`
  ;;
esac

test_mode=false

name=deblob-check

case $1 in
--version | -V)
  sed '/^# '$name' version /,/^# Written by/ { s/^# //; p; }; d' < $0
  exit 0
  ;;

-\? | -h)
  sed -n '/^# usage:/,/# -h/ { /^# -/,/^$/{s/^# \(-.*\):.*/\1/p; d; }; s/^\(# \?\)\?//p; }' < $0 &&
  echo
  echo "run \`$name --help | more' for full usage"
  exit 0
  ;;

--help | -H)
  sed -n '/^# '$name' version /,/^[^#]/ s/^\(# \?\)\?//p' < $0
  exit 0
  ;;

--test | -t)
  test_mode=:
  ;;

--mark-false-positives | -p)
  shift;
  set_sed_cmd () {
    set_sedmain "b list_both;" "p;" "b list_matches;"
  }
  ;;

--print-marked-false-positives | -f)
  shift;
  set_sed_cmd () {
    set_sedmain "b print_marked_matches;" "" "b print_marked_matches;"
  }
  ;;

--print-false-positives | -F)
  shift;
  set_sed_cmd () {
    set_sedmain "b print_matches;" "" "b print_matches;"
  }
  ;;

--deblob | --mark-blobs | -d)
  shift;
  set_sed_cmd () {
    set_sedmain "b list_blobs;" "p;" "p;"
  }
  ;;

--cat | -D)
  shift;
  set_sed_cmd () {
    set_sedmain \
      "# sedcat: Actual blob detected, but there may be false positives." \
      "# sedcat: No blob whatsoever found." \
      "# sedcat: False positives found." \
      "p; d; # sedcat: Just print stuff, remove this line to run the actual script."
  }
  ;;

--print-marked-blobs | -b)
  shift;
  set_sed_cmd () {
    set_sedmain "b print_marked_blobs;"
  }
  ;;

--print-blobs | -B)
  shift;
  set_sed_cmd () {
    set_sedmain "b print_blobs;"
  }
  ;;

--print-marked-blobs-with-context | -c)
  shift;
  set_sed_cmd () {
    set_sedmain "b print_marked_cblobs;"
  }
  ;;

--print-blobs-with-context | -C)
  shift;
  set_sed_cmd () {
    set_sedmain "b print_cblobs;"
  }
  ;;

--list-false-positives | -P)
  shift;
  set_sed_cmd () {
    set_sedmain "" "" "
i\\
$file
q 1;"
  }
  ;;

--list-all-matches | -x)
  shift;
  set_sed_cmd () {
    set_sedmain "
i\\
$file
q 1;" "" "
i\\
$file
q 1;"
  }
  ;;

--print-all-matches | -X)
  shift;
  set_sed_cmd () {
    set_sedmain "b print_both;" "" "b print_matches;"
  }
  ;;

*)
  case $1 in
  -- | -l | --list-blobs) shift;;
  esac
  case $1 in
  -*)
    if test ! -f "$1"; then
      echo "$name: \`$1' given too late or out of the proper sequence." >&2
      echo "$name: The order of arguments is significant, see the usage." >&2
      exit 1
    fi
    ;;
  esac
      
  set_sed_cmd () {
    set_sedmain "
i\\
$file
q 1;"
  }
  ;;

esac

case $1 in
--) shift;;
esac

if $test_mode; then
  pass=:

  # Exercise some nasty inputs to see that we recognize them as blobs
  # with full context.
  for string in \
    "1,2,3,4" \
    "= {
1, 0x2, 03, L'\x4'
}" \
    "=
{
  '\\x1', '\\002'
  ,
  {
    { \"\\x3\", },
    \"\\004\"
  },
};" \
    ".long 1,2
     .long \$3,\$4" \
    "#define X { 1, 2, \\
		 3, 4, /* comment */ \\
	       }" \
  "= {
/*
 * multi-line
 * comment
 */
 {
   0x4c00c000, 0x00000000, 0x00060000, 0x00000000,
 },
}" \
  ; do
    case `echo "$string" | $0 -s 4 -c` in
    "::: - :::
$string") ;;
    *) echo "failed positive test for:
$string" >&2
       pass=false;;
    esac
  done

  # Make sure we do not recognize these as blobs.
  for string in \
    "#define X { 1, 2 }
#define Y { 3, 4 }" \
    " 0x00, 0x00, 0x00 " \
  ; do
    case `echo "$string" | $0 -s 4` in
    "") ;;
    *) echo "failed negative test for:
$string" >&2
       pass=false;;
    esac
  done

  # How did we do?
  if $pass; then
    echo success
  fi

  $pass
  exit
fi

# Call addx as needed to set up more patterns to be recognized as
# false positives.  Takes the input filename in $1.

set_except () {
  # Look for a multi-line definition starting with a line that matches
  # $1 (implicitly anchored to the beginning of the line), and ending
  # at the first ';'.
  initnc () {
    addx "$1[^;]*;"
  }

  # Look for a multi-line definition starting with a line that matches
  # $1 (implicitly anchored to the beginning of the line), and ending
  # at the first ';' that's not within comments.
  initc () {
    addx "$1\\([^;]*\\|$comment\\)*;"
  }

  # Accept as a non-blob an expression $1 that would have otherwise
  # triggered blob detection.  The expression must end in a way that
  # would trigger the blob detection machinery.
  accept () {
    addx "$1"
  }

  # Match up to the end a comment started in $1.
  ocomment () {
    addx "$1\\([^*]\\|[*][*]*[^*/]\\|[*]*[\\n]\\)*[*]*[*][/]"
  }

  # Match $1 followed by backslash-terminated lines and a last
  # non-backslash-terminated line.
  oprepline () {
    addx "$1\\([^\\n]*\\\\[\\n]\\)*[^\\n\\\\]*$eol"
  }

  case /$1 in
  /drivers/net/tg3.c)
    # This file contains firmwares that we deblob with high
    # sensitivity, so make sure the sequences of numbers that are not
    # blobs are not deblobbed.  FIXME: we should have patterns to
    # recognize the blobs instead.
    initnc '	static const u32 test_pat\[4\]\[6\] ='
    initnc '	}, mem_tbl_5705\[\] ='
    ;;
  */*linux*.tar* | */*kernel*.tar* | */*linux-*.*.*/*)
    # false alarms, contain source
    # drivers/net/wan/wanxlfw.inc_shipped -> wanxlfw.S
    accept 'static u8 firmware\[\]={[\n]0x60,\(0x00,\)*0x16,\(0x00,\)*\([\n]\(0x[0-9A-F][0-9A-F],\)*\)*[\n]0x23,0xFC,0x00,0x00,0x00,0x01,0xFF,0xF9,0x00,0xD4,0x61,0x00,0x06,0x74,0x33,0xFC,\([\n]\(0x[0-9A-F][0-9A-F],\)*\)*0x00[\n]};'
    # drivers/usb/serial/xircom_pgs_fw.h -> xircom_pgs.S
    initnc 'static const struct ezusb_hex_record xircom_pgs_firmware\[\] ='
    # drivers/usb/serial/keyspan_pda_fw_h -> keyspan_pda.S
    initnc 'static const struct ezusb_hex_record keyspan_pda_firmware\[\] ='
    # arch/m68k/ifpsp060/*.sa -> src/*.s
    accept '	\.long	0x60ff0000,0x02360000,0x60ff0000,0x16260000[\n]'"$sepx$blobpat*"
    accept '	\.long	0x60ff0000,0x17400000,0x60ff0000,0x15f40000[\n]'"$sepx$blobpat*"
    # arch/powerpc/platforms/cell/spufs/spu_save_dump.h_shipped -> spu_save.c
    initnc 'static unsigned int spu_save_code\[\]  __attribute__((__aligned__(128))) ='
    # arch/powerpc/platforms/cell/spufs/spu_restore_dump.h_shipped -> spu_restore.c
    initnc 'static unsigned int spu_restore_code\[\]  __attribute__((__aligned__(128))) ='
    # drivers/net/ixp2000/ixp2400_tx.ucode -> ixp2400_tx.uc
    initnc '	\.initial_reg_values	= (struct ixp2000_reg_value \[\]) {'
    # drivers/net/ixp2000/ixp2400_rx.ucode -> ixp2400_rx.uc
    initnc '	\.initial_reg_values	= (struct ixp2000_reg_value \[\]) {'
    # crypto/tcrypt.h
    initnc '[ 	]*\.\(digest\|entries\|input\|key\|output\|plaintext\|result\)[ 	]*= {'

    # checked:

    accept '	\$3 = {{pge = {{ste = {\(\([0-9][0-9a-fx{},\n 	]*\|\(pge\|ste\) =\|<repeats [0-9]\+ times>\)[{},\n 	]*\)*<repeats 11 times>}'"$eol"
    # arch/sparc/lib/divdi3.S
    accept '__clz_tab:[\n]	\.byte	0\(,[0-5]\)\+'"$sepx$blobpat*"
    accept 'PITBL:[\n]  \.long  0xC0040000,0xC90FDAA2,'"$blobpat*"
    # arch/m68k/mac/mac_penguin.S
    accept '\(0x[0F][0F],\)\+\\[\n]\(\(0x[0F][0F],\)\+\\[\n]\)*\(0x[0F][0F],\)\+0x00'
    # arch/s390/kernel/head.S
    accept '\.lowcase:[\n]	\.byte 0x00\(,0x0[1-7]\)\+'"$sepx$blobpat*$eol"
    # arch/s390/kernel/bitmap.S
    accept '_zb_findmap:[\n]         \.byte  0\(,[123],0\)\+,4'"$sepx$blobpat*$eol"
    accept '_sb_findmap:[\n]         \.byte  8\(,0,[123]\)\+,0'"$sepx$blobpat*$eol"
    # arch/powerpc/lib/copyuser_64.S
    accept '	\.section __ex_table,"a"'"$sepx$blobpat*"
    # arch/powerpc/platforms/iseries/mf.c
    accept '	memcpy(src, "\\x01\\x00\\x00\\x01\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00".*PROGxxxx'
    # arch/ppc/platforms/ev64260.c
    initnc 'static const unsigned int cpu_745x\[2\]\[16\] ='
    # arch/alpha/lib/fls.c
    initnc 'const unsigned char __flsm1_tab\[256\] ='
    # drivers/input/misc/map_to_7segment.h
    accept '#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\\[\n]	\(0,\)\+'"$eol"
    # sound/oss/ad1848.c
    initc '	static int      init_values_b\[\] ='
    # drivers/input/keyboard/atkbd.c
    initnc 'static unsigned char atkbd_set2_keycode\[512\] ='
    # drivers/usb/serial/keyspan_pda.S and
    # drivers/usb/serial/xircom_pgs.S
    accept 'desc_config1:[\n]	\.byte 0x09, 0x02'"$sepx$blobpat*"
    accept 'string_mfg:[\n]\?\(;\?	\.byte[^\n]*[\n]\)\+string_mfg_end:'
    accept 'string_product:[\n]\?\(;\?	\.byte[^\n]*[\n]\)\+string_product_end:'
    # drivers/media/video/pwc/pwc-nala.h
    accept '   [/][*] \(SQCIF\|QSIF\|QCIF\|SIF\|CIF\|VGA\) [*][/][\n]   {[\n]      {'"$blobpat*"
    # drivers/video/logo/*.ppm
    accept 'P[13]\([\n]#[^\n]*\)*[\n]*\([\n][0-9 ]*\)\+'
    # Documentation/specialix.txt
    accept 'for i in [ 	0-9\\\n]*[\n]do'
    # Documentation/cpu-freq/cpufreq-stats.txt
    accept '         :   3600000   3400000   3200000   3000000   2800000 '
    # Documentation/scsi/sym53c8xx_2.txt and
    # Documentation/scsi/ncr53c8xx_2.txt
    accept '00 00[\n]64 01[\n]8e 0b[\n][\n][0-9a-f \n]*fe fe'
    accept '0f 00 08 08 64 00 0a 00 - id 0[\n]'"$blobpat*"
    accept 'default nvram data:'"$sepx$blobpat*"
    # Documentation/video4linux/sn9c102.txt
    accept '0x0458     0x7025[\n]'"$blobpat*"
    # Documentation/video4linux/et61x251.txt
    accept '0x102c     0x6151[\n]'"$blobpat*"
    # Documentation/video4linux/zc0301.txt
    accept '0x041e     0x4017[\n]'"$blobpat*"
    # Documentation/uml/UserModeLinux-HOWTO.txt
    accept '  (gdb) x\/100x \$25[\n]  0x507d2434:     0x507d2434      0x00000000      0x08048000      0x080a4f8c'"$sepx$blobpat*"
    # Documentation/isdn/README.inc
    accept '      1  0  0  0  0x308'"$sepx$blobpat*"
    # Documentation/sched-stats.txt
    accept 'domain<N> <cpumask> 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36'"$eol"
    # net/ipv4/ipvs/ip_vs_sync.c and
    # net/sctp/sm_make_chunk.c and
    # include/linux/sctp.h
    accept '[ *	]*0                   1                   2                   3[\n][ *	]*0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1'
    # arch/x86/lguest/boot.c
    accept ' \*  1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0'
    # drivers/net/fealnx.c
    ocomment '	[/][*] Configure the PCI bus bursts and FIFO thresholds.'
    # drivers/hwmon/via686a.c
    ocomment '[/][*] the original LUT values from Alex van Kaam <darkside@chello\.nl>'
    # drivers/media/video/saa7114.c
    initc 'static const unsigned char init\[\] = {[^;]*MODE=0 ;.*SAA_7114_NTSC_HSYNC_START'

    # in 2.6.23 only
    accept " Psize    Ipps       Tput     Rxint     Txint    Done     Ndone[\\n] ---------------------------------------------------------------\\([\\n][ 0-9]\\+\\)\\+$eol"
    initnc 'static u_short ataplain_map\[NR_KEYS\] __initdata ='
    initnc 'static RegInitializer initData\[\] __initdata ='
    initnc '	static const unsigned char invert5\[\] ='
    initnc 'static unsigned char alpa2target\[\] ='
    initnc 'static unsigned char target2alpa\[\] ='
    oprepline '#define INIT_THREAD [{0},]\+[ 	]*\\[ 	]*[{0},]\+'
    initnc 'static uint tas300\(1c\|4\)_\(master\|mixer\|treble\|bass\)_tab\[\]='
    initnc 'static short dmasound_[au]law2dma16\[\] ='
    initnc 'static const unsigned short DACVolTable\[101\] ='

    # new in 2.6.25
    accept "%canned_values = ([\\n]	\\([0-9]\\+ => \\[[ 	\\n]\\+\\(\\([0-9]\\+\\|'0x[0-9a-f]\\+'\\),[ 	\\n]*\\)*\\]\\(, \\|[\\n]\\)\\)*);"

    # from 2.6.25-rc* patches
    initnc '	int bcomm_irq\[3\*16\] ='
    initnc '	static const int8 countLeadingZerosHigh\[\] ='
    initnc 'static struct nic_qp_map nic_qp_mapping_[01]\[\] ='
    initnc 'static struct regval ov_initvals\[\] ='
    initnc 'static struct regval stk1125_initvals\[\] ='
    initnc 'static u8 bnx2x_stats_len_arr\[BNX2X_NUM_STATS\] ='
    initnc 'static const struct arb_line read_arb_data\[NUM_RD_Q\]\[MAX_RD_ORD + 1\] ='
    initnc 'static const struct arb_line write_arb_data\[NUM_WR_Q\]\[MAX_WR_ORD + 1\] ='
    oprepline '#define AR5K_RATES_11A '
    oprepline '#define AR5K_RATES_11B '
    oprepline '#define AR5K_RATES_11G '
    oprepline '#define AR5K_RATES_TURBO '
    oprepline '#define AR5K_RATES_XR '
    initnc '		} blinkrates\[\] ='
    initnc 'static const struct ath5k_ini ar5212_ini\[\] ='
    initnc 'static const struct ath5k_ini_mode rf5413_ini_mode_end\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5111\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5112\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5112a\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5413\[\] ='
    initnc 'const u\(8\|16\|32\) b43_ntab_\(\(adjustpower\|estimatepowerlt\|gainctl\|iqlt\|loftlt\|noisevar1\|tdi[24]0a\)[01]\|channelest\|frame\(lookup\|struct\)\|mcs\|pilot\|tdtrn\|tmap\)\[\] ='

    # quite suspicious
    # arch/parisc/kernel/perf_images.h
    initc 'static uint32_t onyx_images\[\]\[PCXU_IMAGE_SIZE\/sizeof(uint32_t)\] __read_mostly ='
    initc 'static uint32_t cuda_images\[\]\[PCXW_IMAGE_SIZE\/sizeof(uint32_t)\] __read_mostly ='

    # These are regarded as ok
    initnc 'static const u8 SN9C102_\(Y\|UV\)_QTABLE[01]\[64\] = {'
    initnc '	static const u8 jpeg_header\[589\] = {'
    accept '[	]\{1,2\}err = sn9c102_write_const_regs(cam\(,[ 	\n]\+{0x[0-9a-fA-F][0-9a-fA-F], 0x[0-9a-fA-F][0-9a-fA-F]}\)*);'

    # too lax?
    initnc 'static yyconst flex_int\(16\|32\)_t yy_[^[]*\[[][0-9]*\] ='
    initnc 'static const \(yytype_u\?int\(8\|16\)\|unsigned \(short\( int\)\?\|char\)\) yy[^[]*\[\] ='
    initnc '\(\|	\)static \(const \|\)\(unsigned \(short\|char\)\|struct SiS_[^ ]*\) SiS[^[]*\(\[[] [*0-9]*\]\)\+ *='

    initnc 'static const a3d_Hrtf_t A3dHrirZeros = {'
    initnc 'static const a3d_Hrtf_t A3dHrirImpulse = {'
    initnc 'static const a3d_Hrtf_t A3dHrirOnes = {'
    initnc 'static const a3d_Hrtf_t A3dHrirSatTest = {'
    initnc 'static const a3d_Hrtf_t A3dHrirDImpulse = {'
    initnc 'static const a3d_ItdDline_t A3dItdDlineZeros = {'
    initnc 'static auxxEqCoeffSet_t asEqCoefsNormal = {'
    initnc 'static xtalk_dline_t const alXtalkDlineTest = {'
    initnc 'static struct nand_ecclayout rtc_from4_nand_oobinfo = {'
    initnc 'static const s16 tempLUT\[\] ='
    initnc 'static const u8 viaLUT\[\] ='
    initnc 'static struct { int xres, yres, left, right, upper, lower, hslen, vslen, vfreq; } timmings\[\] __initdata = {'
    initnc 'static struct platinum_regvals platinum_reg_init_[0-9]* = {'
    initnc '} sisfb_ddc[sf]modes\[\] __devinitdata ='
    initnc 'static struct dvb_pll_desc [^\n]* = {'
    initnc 'static u32 LABELPATCHES\[\] __attribute((unused)) ='

    initnc 'static dbdev_tab_t dbdev_tab\[\] ='
    accept '\(EXP\|LOG\|ATAN\)TBL:'"$sepx$blobpat*"
    initnc 'static char fm_volume_table\[128\] ='
    initnc 'unsigned int snd_gf1_scale_table\[SNDRV_GF1_SCALE_TABLE_SIZE\] ='
    # remaining after original deblob_2_6_24, not fully checked

    oprepline '#define OV51[18]_\(Y\|UV\)QUANTABLE {'
    initnc '		static unsigned char const data_bit\[64\] ='
    initnc '		static const u8 data_sbit\[32\] ='
    initnc '	\.RightCoefs ='
    initnc '	#define WakeupSeq    {'
    initnc '	SetRate44100\[\] ='
    initnc '	const short period\[32\] ='
    initnc '	const static int desc_idx_table\[\] ='
    initnc '	int prop_bcomm_irq\[3\*16\] ='
    initnc '	static char logSlopeTable\[128\] ='
    initnc '	static const int uc_\(dup\|word\)_table\[\]\[2\] ='
    initnc '	static const struct mc7_timing_params mc7_timings\[\] ='
    initnc '	static const u8 biphase_tbl\[\] ='
    initnc '	static const u8 cs170\[7 \* 8\] ='
    initnc '	static const u8 cs3[13]a\[8 \* 4\] ='
    initnc '	static const u8 dramsr13\[12 \* 5\] ='
    initnc '	static const u8 log10\[\] ='
    initnc '	static const u8 mpeg_hdr_data\[\] ='
    initnc '	static const u8 sdramtype\[13\]\[5\] ='
    initnc '	static const u8 t\[\] ='
    initnc '	static const unsigned int avg_pkts\[NCCTRL_WIN\] ='
    initnc '	static const unsigned short ac97_defaults\[\] ='
    initnc '	static int exp_lut\[256\] ='
    initnc '	static u16 jpeg_tables\[\]\[70\] ='
    initnc '	static u16 tables\[\] ='
    initnc '	static u32 logMagTable\[128\] ='
    initnc '	static u8 init_bufs\[13\]\[5\] ='
    initnc '	static u8 sine \[\] ='
    initnc '	static u_short geometry_table\[\]\[[45]\] ='
    initnc '	static unsigned char CRCTable1\[\] ='
    initnc '	static unsigned char CRCTable2\[\] ='
    initnc '	static unsigned char default_colors\[\] ='
    initnc '	static unsigned char iso_regs\[8\]\[4\] ='
    initnc '	static unsigned char log_scale\[101\] ='
    initnc '	static unsigned char msg\[\] ='
    initnc '	static unsigned char static_pad\[\] ='
    initnc '	static unsigned char table_alaw2ulaw\[\] ='
    initnc '	static unsigned char table_ulaw2alaw\[\] ='
    initnc '	u32 reg_boundaries\[\] ='
    initnc '	u8 b\[\] ='
    initnc '	uint8_t tx\[\] ='
    initnc '	unsigned char saa7111_regs\[\] ='
    initnc '	unsigned char sas_pcd_m_pg\[\] ='
    initnc '	} modedb\[5\] ='
    initnc '	} reg_tbl\[\] ='
    initnc '	} vals\[\] ='
    initnc '	} vm_devices\[\] ='
    initnc '    static const code distfix\[32\] ='
    initnc '    static const code lenfix\[512\] ='
    initnc '  int poly\[\]='
    initnc '  static const unsigned char asso_values\[\] ='
    initnc '  static unsigned char asso_values\[\] ='
    initnc '  } cards_ds\[\] ='
    initnc '    static const int8 countLeadingZerosHigh\[\] ='
    initnc '    static const unsigned short d\(base\|ext\)\[32\] ='
    initnc '#define OV511_QUANTABLESIZE	64'
    initnc 'BYTE BtCard::SRAMTable_\(NTSC\|PAL\)\[\] ='
    initnc 'BYTE SRAMTable\[\]\[ 60 \] ='
    accept 'irq_prio_[hdlc]*:'"$sepx$blobpat*"
    initc '__u8 _ascebc\[256\] ='
    initc '__u8 _ebc_tolower\[256\] ='
    initc '__u8 _ebc_toupper\[256\] ='
    initnc 'adapter_tag_info_t aic7[9x]xx_tag_info\[\] ='
    initnc 'char dmasound_alaw2dma8\[\] ='
    initnc 'char dmasound_ulaw2dma8\[\] ='
    initnc 'const struct aper_size_info_16 agp3_generic_sizes\[AGP_GENERIC_SIZES_ENTRIES\] ='
    initnc 'const u16 crc_itu_t_table\[256\] ='
    initnc 'const u8 byte_rev_table\[256\] ='
    initnc 'const u8 crc7_syndrome_table\[256\] ='
    initnc 'const unsigned char INIT_2\[127\] ='
    initnc 'int snd_sf_vol_table\[128\] ='
    initnc 'static	u_char	irq_to_siubit\[\] ='
    initnc 'static	u_char	irq_to_siureg\[\] ='
    initnc 'static Byte_t RData\[RDATASIZE\] ='
    initnc 'static __const__ __u16 gx_coeff\[256\] ='
    initnc 'static __u8 init7121ntsc\[\] ='
    initnc 'static __u8 init7121pal\[\] ='
    initnc 'static __u8 mode8420\(pro\|con\)\[\] ='
    initnc 'static byte capidtmf_leading_zeroes_table\[0x100\] ='
    initnc 'static char channel_map_madi_ss\[HDSPM_MAX_CHANNELS\] ='
    initnc 'static char coefficients\[NM_TOTAL_COEFF_COUNT \* 4\] ='
    initnc 'static char ecc_syndrome_table\[\] ='
    initnc 'static char isdn_audio_alaw_to_ulaw\[\] ='
    initnc 'static char isdn_audio_ulaw_to_alaw\[\] ='
    initnc 'static char mix_cvt\[101\] ='
    initnc 'static char opl3_volume_table\[128\] ='
    initnc 'static const RegInitializer initData\[\] __initdata ='
    initnc 'static const __u16 crc10_table\[256\] ='
    initnc 'static const __u32 crc_c\[256\] ='
    initnc 'static const char zr360[56]0_dht\[0x1a4\] ='
    initnc 'static const char zr360[56]0_dqt\[0x86\] ='
    initnc 'static const fixp_t cos_table\[46\] ='
    initnc 'static const int init_seq\[\] ='
    initnc 'static const int mobile_vid_table\[32\] ='
    initnc 'static const s16 snd_opl4_pitch_map\[0x600\] ='
    initnc 'static const s8 \(b43\(\|legacy\)\|bcm43xx\)_tssi2dbm_[bg]_table\[\] ='
    initnc 'static const s8 budtab\[256\] ='
    initnc 'static const struct aper_size_info_32 u3_sizes\[8\] ='
    initnc 'static const struct aper_size_info_8 via_generic_sizes\[9\] ='
    initnc 'static const struct color clut_vga16\[16\] ='
    initnc 'static const struct gain_entry gain_table\[2\]\[108\] ='
    initnc 'static const struct mV_pos __initdata mobilevrm_mV\[32\] ='
    initnc 'static const struct mV_pos __initdata vrm85_mV\[32\] ='
    initnc 'static const struct menelaus_vtg_value vcore_values\[\] ='
    initnc 'static const struct opl4_region regions_[0-9a-frums]*\[\] ='
    initnc 'static const struct regval regval_table\[\] ='
    initnc 'static const struct rf_channel rf_vals_5222\[\] ='
    initnc 'static const struct rf_channel rf_vals_5225_2527\[\] ='
    initnc 'static const struct rf_channel rf_vals_5226\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2522\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2523\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2524\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2525\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2525e\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2528\[\] ='
    initnc 'static const struct rf_channel rf_vals_noseq\[\] ='
    initnc 'static const struct rf_channel rf_vals_seq\[\] ='
    initnc 'static const u16 Sbox\[256\] ='
    initnc 'static const u16 count_lut\[\] ='
    # drivers/net/e1000e/phy.c
    initnc 'static const u16 e1000_igp_2_cable_length_table\[\] ='
    initnc 'static const u16 rtl8225bcd_rxgain\[\] ='
    initnc 'static const u16 rtl8225z2_rxgain\[\] ='
    initnc 'static const u16 stufftab\[5 \* 256\] ='
    initnc 'static const u16 tkip_sbox\[256\] ='
    initnc 'static const u16 wm8753_reg\[\] ='
    initnc 'static const u32 SS[0-3]\[256\] ='
    initnc 'static const u32 S[1-8]\[64\] ='
    initnc 'static const u32 T[0-5]\[256\] ='
    initnc 'static const u32 Tm\[24\]\[8\] ='
    initnc 'static const u32 bass_table\[41\]\[5\] ='
    initnc 'static const u32 bf_sbox\[256 \* 4\] ='
    initnc 'static const u32 camellia_sp0222\[256\] ='
    initnc 'static const u32 camellia_sp1110\[256\] ='
    initnc 'static const u32 camellia_sp3033\[256\] ='
    initnc 'static const u32 camellia_sp4404\[256\] ='
    initnc 'static const u32 crc32c_table\[256\] ='
    initnc 'static const u32 db_table\[101\] ='
    initnc 'static const u32 m8xx_size_to_gray\[M8XX_SIZES_NO\] ='
    initnc 'static const u32 mds\[4\]\[256\] ='
    initnc 'static const u32 pc2\[1024\] ='
    initnc 'static const u32 s[1-7]\[256\] ='
    initnc 'static const u32 sb8\[256\] ='
    initnc 'static const u32 tfrc_calc_x_lookup\[TFRC_CALC_X_ARRSIZE\]\[2\] ='
    initnc 'static const u32 treble_table\[41\]\[5\] ='
    initnc 'static const u64 [CT][0-7]\[256\] ='
    initnc 'static const u64 sbox[1-4]\[256\] ='
    initnc 'static const u64 sha512_K\[80\] ='
    initnc 'static const u8 Tr\[4\]\[8\] ='
    initnc 'static const u8 aes_sbox\[256\] ='
    initnc 'static const u8 calc_sb_tbl\[512\] ='
    initnc 'static const u8 exp_to_poly\[492\] ='
    initnc 'static const u8 legal_ansi_char_array\[0x40\] ='
    initnc 'static const u8 parity\[\] ='
    initnc 'static const u8 pc1\[256\] ='
    initnc 'static const u8 poly_to_exp\[255\] ='
    initnc 'static const u8 q[01]\[256\] ='
    initnc 'static const u8 ratio_lut\[\] ='
    initnc 'static const u8 rs\[256\] ='
    initnc 'static const u8 rtl8225_agc\[\] ='
    initnc 'static const u8 rtl8225_tx_power_cck\[\] ='
    initnc 'static const u8 rtl8225_tx_power_cck_ch14\[\] ='
    initnc 'static const u8 rtl8225z2_tx_gain_cck_ofdm\[\] ='
    initnc 'static const u8 setup\[\] ='
    initnc 'static const u8 speedtab \[3\]\[12\] ='
    initnc 'static const u_char irq_to_siubit\[\] ='
    initnc 'static const u_char irq_to_siureg\[\] ='
    initnc 'static const u_char nand_ecc_precalc_table\[\] ='
    initnc 'static const uint8_t parity\[256\] ='
    initnc 'static const unsigned char \(UV\|Y\)_QUANTABLE\[64\] ='
    initnc 'static const unsigned char __initdata mV_mobilevrm\[32\] ='
    initnc 'static const unsigned char __initdata mV_vrm85\[32\] ='
    initnc 'static const unsigned char barco_p1\[2\]\[9\]\[7\]\[3\] ='
    initnc 'static const unsigned char bitcounts\[256\] ='
    initnc 'static const unsigned char blue\[256\] ='
    initnc 'static const unsigned char chktab[hl]\[256\] ='
    initnc 'static const unsigned char comet_miireg2offset\[32\] ='
    initnc 'static \(const \)\?unsigned char euc2sjisibm_g3upper_map\[\]\[2\] ='
    initnc 'static const unsigned char green\[256\] ='
    initnc 'static const unsigned char hash_table_ops\[64\*4\] ='
    initnc 'static const unsigned char hid_keyboard\[256\] ='
    initnc 'static const unsigned char mts_direction\[256\/8\] ='
    initnc 'static const unsigned char red\[256\] ='
    initnc 'static \(const \)\?unsigned char sjisibm2euc_map\[\]\[2\] ='
    initnc 'static const unsigned char vol_cvt_datt\[128\] ='
    initnc 'static const unsigned char wm_vol\[256\] ='
    initnc 'static const unsigned int MulIdx\[16\]\[16\] ='
    initnc 'static const unsigned int crctab32\[\] ='
    initnc 'static const unsigned short crc_flex_table\[\] ='
    initnc 'static const unsigned short logtable\[256\] ='
    initnc 'static const unsigned short wd7000_iobase\[\] ='
    initnc 'static const unsigned short x86_keycodes\[256\] ='
    initnc 'static const unsigned table\[\] ='
    initnc 'static int MV300_reg_8bit\[256\] ='
    initnc 'static int fifo_map\[\]\[MAX_TX_FIFOS\] ='
    initnc 'static int initial_lfsr\[\] ='
    initnc 'static int log_tbl\[129\] ='
    initnc 'static int logitech_expanded_keymap\[LOGITECH_EXPANDED_KEYMAP_SIZE\] ='
    initnc 'static int miro_fmtuner\[\]  ='
    initnc 'static int miro_tunermap\[\] ='
    initnc 'static int register_size\[\] ='
    initnc 'static int reserve_list\[MAX_RES_ARGS\] ='
    initnc 'static int reverse6\[64\] ='
    initnc 'static short attack_time_tbl\[128\] ='
    initnc 'static short beep_wform\[256\] ='
    initnc 'static short decay_time_tbl\[128\] ='
    initnc 'static short isdn_audio_[ua]law_to_s16\[\] ='
    initnc 'static struct cipher_testvec anubis_cbc_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec anubis_cbc_enc_tv_template\[\] ='
    initnc 'static struct cipher_testvec anubis_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec anubis_enc_tv_template\[\] ='
    initnc 'static struct cipher_testvec camellia_cbc_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec camellia_cbc_enc_tv_template\[\] ='
    initnc 'static struct cipher_testvec camellia_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec camellia_enc_tv_template\[\] ='
    initnc 'static struct cipher_testvec cast6_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec cast6_enc_tv_template\[\] ='
    initnc 'static struct cipher_testvec serpent_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec serpent_enc_tv_template\[\] ='
    initnc 'static struct cipher_testvec tea_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec tea_enc_tv_template\[\] ='
    initnc 'static struct cipher_testvec tf_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec tf_enc_tv_template\[\] ='
    initnc 'static struct cipher_testvec tnepres_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec xeta_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec xeta_enc_tv_template\[\] ='
    initnc 'static struct cipher_testvec xtea_dec_tv_template\[\] ='
    initnc 'static struct cipher_testvec xtea_enc_tv_template\[\] ='
    initnc 'static struct comp_testvec deflate_decomp_tv_template\[\] ='
    initnc 'static struct hash_testvec aes_xcbc128_tv_template\[\] ='
    initnc 'static struct hash_testvec crc32c_tv_template\[\] ='
    initnc 'static struct hash_testvec hmac_sha256_tv_template\[\] ='
    initnc 'static struct hash_testvec sha256_tv_template\[\] ='
    initnc 'static struct hash_testvec sha384_tv_template\[\] ='
    initnc 'static struct hash_testvec sha512_tv_template\[\] ='
    initnc 'static struct hash_testvec wp256_tv_template\[\] ='
    initnc 'static struct hash_testvec wp384_tv_template\[\] ='
    initnc 'static struct hash_testvec wp512_tv_template\[\] ='
    initnc 'static struct iwl\(3945\)\?_tx_power power_gain_table\[2\]\[IWL_MAX_GAIN_ENTRIES\] ='
    initnc 'static struct ovcamchip_regvals regvals_init_\(76be\|7[16]20\|7x10\)\[\] ='
    initnc 'static struct regval_list ov7670_default_regs\[\] ='
    initnc 'static struct s_c2 SetRate48000\[\] ='
    initnc 'static struct tea6420_multiplex TEA6420_line\[MXB_AUDIOS+1\]\[2\] ='
    initnc 'static struct wm_info i810_wm_16_100\[\] ='
    initnc 'static struct wm_info i810_wm_16_133\[\] ='
    initnc 'static struct wm_info i810_wm_24_100\[\] ='
    initnc 'static struct wm_info i810_wm_24_133\[\] ='
    initnc 'static struct wm_info i810_wm_8_100\[\] ='
    initnc 'static struct wm_info i810_wm_8_133\[\] ='
    initnc 'static struct { struct fb_bitfield red, green, blue, transp; int bits_per_pixel; } colors\[\] ='
    initnc 'static u16 asEqCoefsPipes\[64\] ='
    initnc 'static u16 asEqCoefsZeros\[50\] ='
    initnc 'static u16 asEqOutStateZeros\[48\] ='
    initnc 'static u16 default_key_map \[256\] ='
    initnc 'static u16 eq_levels\[64\] ='
    initnc 'static u32  crc32tab\[\] __attribute__ ((aligned(8))) ='
    initnc 'static u32 ac3_frames\[3\]\[32\] ='
    initnc 'static u32 adwDecim8\[33\] ='
    initnc 'static u32 h_prescale\[64\] ='
    initnc 'static u32 v_gain\[64\] ='
    initnc 'static u8 cvs_time_value\[\]\[XFER_UDMA_6 - XFER_UDMA_0 + 1\] ='
    initnc 'static u8 SRAM_Table\[\]\[60\] ='
    initnc 'static u8 act_time_value\[\]\[8\] ='
    initnc 'static u8 alps_tdee4_stv0297_inittab\[\] ='
    initnc 'static u8 bnx2_5706_stats_len_arr\[BNX2_NUM_STATS\] ='
    initnc 'static u8 bnx2_5708_stats_len_arr\[BNX2_NUM_STATS\] ='
    initnc 'static u8 flit_desc_map\[\] ='
    initnc 'static u8 ini_time_value\[\]\[8\] ='
    initnc 'static u8 init_tab \[\] ='
    initnc 'static u8 mac_reader\[\] ='
    initnc 'static u8 mt2131_config1\[\] ='
    initnc 'static u8 mt2266_init2\[\] ='
    initnc 'static u8 opera1_inittab\[\] ='
    initnc 'static u8 rco_time_value\[\]\[8\] ='
    initnc 'static u8 saa7113_init_regs\[\] ='
    initnc 'static u8 samsung_tbmu24112_inittab\[\] ='
    initnc 'static u8 tas3004_treble_table\[\] ='
    initnc 'static u8 w1_crc8_table\[\] ='
    initnc 'static u_char const data_sizes_32\[32\] ='
    initnc 'static u_long ident_map\[32\] ='
    initnc 'static u_short alt_map\[NR_KEYS\] ='
    initnc 'static u_short altgr_map\[NR_KEYS\] ='
    initnc 'static u_short ctrl_alt_map\[NR_KEYS\] ='
    initnc 'static u_short ctrl_map\[NR_KEYS\] *='
    initnc 'static u_short shift_ctrl_map\[NR_KEYS\] ='
    initnc 'static u_short shift_map\[NR_KEYS\] *='
    initnc 'static uchar perm1\[56\] ='
    initnc 'static uchar perm2\[48\] ='
    initnc 'static uchar perm3\[64\] ='
    initnc 'static uchar perm4\[48\] ='
    initnc 'static uchar perm5\[32\] ='
    initnc 'static uchar perm6\[64\] ='
    initnc 'static uchar sbox\[8\]\[4\]\[16\] ='
    initnc 'static uint16_t crc_table\[256\] ='
    initnc 'static uint8_t lpfcAlpaArray\[\] ='
    initnc 'static uint8_t seqprog\[\] ='
    initnc 'static unsigned char V110_OffMatrix_9600\[\] ='
    initnc 'static unsigned char V110_OnMatrix_9600\[\] ='
    initnc 'static unsigned char a2232_65EC02code\[\] ='
    initnc 'static unsigned char alaw_main\[\] ='
    initnc 'static unsigned char atkbd_set3_keycode\[512\] ='
    initnc 'static unsigned char atkbd_unxlate_table\[128\] ='
    initnc 'static unsigned char banner_table\[\] ='
    initnc 'static unsigned char bootlogo_bits\[\] ='
    initnc 'static unsigned char bus2core_8260\[\] ='
    initnc 'static unsigned char bus2core_8280\[\] ='
    initnc 'static unsigned char caseorder\[256\] ='
    initnc 'static unsigned char crystal_key\[\] ='
    initnc 'static unsigned char dsp_ulaw\[\] ='
    initnc 'static unsigned char expressiontab\[128\] ='
    initnc 'static unsigned char header2\[\] ='
    initnc 'static unsigned char hidp_keycode\[256\] ='
    initnc 'static unsigned char ima_adpcm_capture\[\] ='
    initnc 'static unsigned char ima_adpcm_init\[\] ='
    initnc 'static unsigned char ima_adpcm_playback\[\] ='
    initnc 'static unsigned char irq_xlate\[32\] ='
    initnc 'static unsigned char mulaw_main\[\] ='
    initnc 'static unsigned char nkbd_keycode\[128\] ='
    initnc 'static unsigned char pan_volumes\[256\] ='
    initnc 'static unsigned char parm_block\[32\] ='
    initnc 'static unsigned char raw3270_ebcgraf\[64\] ='
    initnc 'static unsigned char rfcomm_crc_table\[256\] ='
    initnc 'static unsigned char rwa_unlock\[\] __initdata ='
    initnc 'static unsigned char seqprog\[\] ='
    initnc 'static unsigned char snd_opl4_volume_table\[128\] ='
    initnc 'static unsigned char splash_bits\[\] ='
    initnc 'static unsigned char sunkbd_keycode\[128\] ='
    initnc 'static unsigned char ufs_fragtable_8fpb\[\] ='
    initnc 'static unsigned char ufs_fragtable_other\[\] ='
    initnc 'static unsigned char ulaw_dsp\[\] ='
    initnc 'static unsigned char usb_kbd_keycode\[256\] ='
    initnc 'static unsigned char vga_font\[cmapsz\] \(BTDATA \|\)='
    initnc 'static unsigned char voltab[12]\[128\] ='
    initnc 'static unsigned char vpd89_data\[\] ='
    initnc 'static unsigned char xtkbd_keycode\[256\] ='
    initnc 'static unsigned int ac3_bitrates\[32\] ='
    initnc 'static unsigned int bass_volume_table\[\] ='
    initnc 'static unsigned int bitrates\[3\]\[16\] ='
    initnc 'static unsigned int isa_dma_port\[8\]\[7\] ='
    initnc 'static unsigned int master_volume_table\[\] ='
    initnc 'static unsigned int mixer_volume_table\[\] ='
    initnc 'static unsigned int pan_table\[63\] ='
    initnc 'static unsigned int snapper_bass_volume_table\[\] ='
    initnc 'static unsigned int snapper_treble_volume_table\[\] ='
    initnc 'static unsigned int treble_volume_table\[\] ='
    initnc 'static unsigned int valid_mem\[\] ='
    initnc 'static unsigned long arthur_to_linux_signals\[32\] ='
    initnc 'static unsigned long shmedia_opcode_table\[64\] ='
    initnc 'static unsigned nv\([34]\|10\)TableP\(FIFO\|GRAPH\|RAMIN\)\[\]\[2\] ='
    initnc 'static unsigned short fcstab\[256\] ='
    initnc 'static unsigned short init[1234]\[128\] \/\*__devinitdata\*\/ ='
    initnc 'static unsigned short log_table\[LOG_TABLE_SIZE\*2\] ='
    initnc 'static unsigned short rc_ioport\[\] ='
    initnc 'static unsigned short translations\[\]\[256\] ='
    initnc 'static unsigned short treble_parm\[12\]\[9\] ='
    initnc 'struct RGBColors TextCLUT\[256\] ='
    initnc 'struct VgaRegs GenVgaTextRegs\[NREGS+1\] ='
    initnc 'struct battery_thresh  spitz_battery_levels_noac\[\] ='
    initnc 'struct battery_thresh spitz_battery_levels_acin\[\] ='
    initnc 'struct fb_bitfield rgb_bitfields\[\]\[4\] ='
    initnc 'struct mode_registers std_modes\[\] ='
    initnc 'struct vmode_attr vmode_attrs\[VMODE_MAX\] ='
    initnc 'u16 const crc16_table\[256\] ='
    initnc 'u16 const crc_ccitt_table\[256\] ='
    initnc 'u16 hfsplus_compose_table\[\] ='
    initnc 'u16 hfsplus_decompose_table\[\] ='
    initnc 'u_char const data_sizes_16\[32\] ='
    initnc 'u_short alt_map\[NR_KEYS\] ='
    initnc 'u_short altgr_map\[NR_KEYS\] ='
    initnc 'u_short ctrl_alt_map\[NR_KEYS\] ='
    initnc 'u_short ctrl_map\[NR_KEYS\] *='
    initnc 'u_short plain_map\[NR_KEYS\] *='
    initnc 'u_short shift_ctrl_map\[NR_KEYS\] ='
    initnc 'u_short shift_map\[NR_KEYS\] *='
    initnc 'uint patch_2[0f]00\[\] ='
    initnc 'uint16_t e1000_igp_cable_length_table\[IGP01E1000_AGC_LENGTH_TABLE_SIZE\] ='
    initnc 'uint16_t e1000_igp_2_cable_length_table\[IGP02E1000_AGC_LENGTH_TABLE_SIZE\] ='
    initnc '} euc2sjisibm_jisx0212_map\[\] ='
    initnc '} freq\[\] ='
    initnc '} hps_h_coeff_tab \[\] ='
    initnc '} hps_v_coeff_tab \[\] ='
    initnc '} init_tab\[\] ='
    initnc '} maven_gamma\[\] ='
    initnc '} mem_table\[\] ='
    initnc '} mxb_saa7740_init\[\] ='
    initnc '} pll_table\[\] ='
    initnc '} qam256_snr_tab\[\] ='
    initnc '} qam64_snr_tab\[\] ='
    initnc '} sil_port\[\] ='
    initnc '} vsb_snr_tab\[\] ='
    initnc '} yss225_registers\[\] __devinitdata ='
    ;;
  */patch*2.6.25-rc*)
    initnc ';[/][*]@@ -[0-9]*,[0-9]* +[0-9]*,[0-9]* @@ static uchar sbox\[8\]\[4\]\[16\] = {[*][/];'
    accept '	\$3 = {{pge = {{ste = {\(\([0-9][0-9a-fx{},\n 	]*\|\(pge\|ste\) =\|<repeats [0-9]\+ times>\)[{},\n 	]*\)*<repeats 11 times>}'"$eol"
    initnc 'static yyconst flex_int\(16\|32\)_t yy_[^[]*\[[0-9]*\] ='
    initnc 'static const yytype_u\?int\(8\|16\) yy[^[]*\[\] ='
    initnc '	int bcomm_irq\[3\*16\] ='
    initnc '	static const int8 countLeadingZerosHigh\[\] ='
    initnc 'static unsigned long shmedia_opcode_table\[64\] ='
    initnc 'u_char const data_sizes_16\[32\] ='
    initnc 'static u_char const data_sizes_32\[32\] ='
    initnc '		\.\(digest\|entries\|input\|key\|output\|plaintext\|result\)[ 	]*= {'
    initnc 'static struct [^\n]*_testvec [^\n]*_tv_template\[\] ='
    initnc 'static struct nic_qp_map nic_qp_mapping_[01]\[\] ='
    initnc 'static u8 mt2266_init2\[\] ='
    initnc 'static struct regval ov_initvals\[\] ='
    initnc 'static struct regval stk1125_initvals\[\] ='
    initnc 'static u8 bnx2x_stats_len_arr\[BNX2X_NUM_STATS\] ='
    initnc 'static const struct arb_line read_arb_data\[NUM_RD_Q\]\[MAX_RD_ORD + 1\] ='
    initnc 'static const struct arb_line write_arb_data\[NUM_WR_Q\]\[MAX_WR_ORD + 1\] ='
    initnc 'uint16_t e1000_igp_cable_length_table\[IGP01E1000_AGC_LENGTH_TABLE_SIZE\] ='
    initnc 'uint16_t e1000_igp_2_cable_length_table\[IGP02E1000_AGC_LENGTH_TABLE_SIZE\] ='
    oprepline '#define AR5K_RATES_11A '
    oprepline '#define AR5K_RATES_11B '
    oprepline '#define AR5K_RATES_11G '
    oprepline '#define AR5K_RATES_TURBO '
    oprepline '#define AR5K_RATES_XR '
    initnc '		} blinkrates\[\] ='
    initnc 'static const struct ath5k_ini ar5212_ini\[\] ='
    initnc 'static const struct ath5k_ini_mode rf5413_ini_mode_end\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5111\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5112\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5112a\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5413\[\] ='
    initnc 'static const u16 rtl8225bcd_rxgain\[\] ='
    initnc 'static const u8 rtl8225_agc\[\] ='
    initnc 'static const u8 rtl8225_tx_power_cck\[\] ='
    initnc 'static const u8 rtl8225_tx_power_cck_ch14\[\] ='
    initnc 'static const u16 rtl8225z2_rxgain\[\] ='
    accept '     \( 49,\)*[\n]\([ 0-9,]*[\n]\)*     \( 49,\)*'"$eol"
    initnc 'static const unsigned char wm_vol\[256\] ='
    accept 'domain<N> <cpumask> 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36'"$eol"
    # drivers/net/e1000e/phy.c
    initnc 'static const u16 e1000_igp_2_cable_length_table\[\] ='
    accept '	24 => \[[\n]\([^\n]*[\n]\)*	\]\(, [0-9]\+ => \[\)\?'"$eol"
    accept '		'"'"'0x[^\n]*[\n]\([^\n]*[\n]\)*	\]\(, [0-9]\+ => \[\)\?'"$eol"
    initnc 'const u\(8\|16\|32\) b43_ntab_\(\(adjustpower\|estimatepowerlt\|gainctl\|iqlt\|loftlt\|noisevar1\|tdi[24]0a\)[01]\|channelest\|frame\(lookup\|struct\)\|mcs\|pilot\|tdtrn\|tmap\)\[\] ='
    ;;
  */nouveau-drm*.patch)
    initnc '\(static uint32_t\|}\) nv04_graph_ctx_regs \[\] ='
    initnc 'static int nv10_graph_ctx_regs \[\] ='

    # Although the developers of the drivers are not trying to stop
    # anyone from modifying it or understanding it, they acknowledge
    # these are bits of code, obtained through mmio interactions.
    # This means these blobs are not source code, AND original authors
    # of the blobs have power to stop others from modifying them.
    # Non-Free software, for sure.

    # initnc 'static uint32_t nv\(4[013467ace]\|49_4b\|8[46]\)_ctx_\(voodoo\|prog\)\[\] ='
    ;;
  */linux-2.6-lirc.patch)
    initnc 'const unsigned char map_table\[\] ='
    ;;
  */linux-2.6-modsign-mpilib.patch)
    initnc 'const unsigned char __clz_tab\[\] ='
    ;;
  */linux-2.6-wireless*.patch)
    initnc 'const u\(8\|16\|32\) b43_ntab_\(\(adjustpower\|estimatepowerlt\|gainctl\|iqlt\|loftlt\|noisevar1\|tdi[24]0a\)[01]\|channelest\|frame\(lookup\|struct\)\|mcs\|pilot\|tdtrn\|tmap\)\[\] ='
    initnc 'static const s8 \(b43\(legacy\)\?\|bcm43xx\)_tssi2dbm_[bg]_table\[\] ='
    initnc 'static struct iwl\(3945\)\?_tx_power power_gain_table\[2\]\[IWL_MAX_GAIN_ENTRIES\] ='
    initnc 'static const struct gain_entry gain_table\[2\]\[108\] ='
    initnc 'static const struct rf_channel rf_vals_5222\[\] ='
    initnc 'static const struct rf_channel rf_vals_5225_2527\[\] ='
    initnc 'static const struct rf_channel rf_vals_5226\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2522\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2523\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2524\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2525\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2525e\[\] ='
    initnc 'static const struct rf_channel rf_vals_bg_2528\[\] ='
    initnc 'static const struct rf_channel rf_vals_noseq\[\] ='
    initnc 'static const struct rf_channel rf_vals_seq\[\] ='
    initnc '	static const u8 t\[\] ='
    initnc 'static const u16 rtl8225bcd_rxgain\[\] ='
    initnc 'static const u8 rtl8225_agc\[\] ='
    initnc 'static const u8 rtl8225_tx_power_cck\[\] ='
    initnc 'static const u8 rtl8225_tx_power_cck_ch14\[\] ='
    initnc 'static const u16 rtl8225z2_rxgain\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5111\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5112\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5112a\[\] ='
    initnc 'static const struct ath5k_ini_rf rfregs_5413\[\] ='
    oprepline '#define AR5K_RATES_11A '
    oprepline '#define AR5K_RATES_11B '
    oprepline '#define AR5K_RATES_11G '
    oprepline '#define AR5K_RATES_TURBO '
    oprepline '#define AR5K_RATES_XR '
    initnc 'static const struct ath5k_ini ar5212_ini\[\] ='
    initnc 'static const struct ath5k_ini_mode rf\(5413\|24\(13\|25\)\)_ini_mode_end\[\] ='
    initnc '		} blinkrates\[\] ='

    # git logs
    accept '   sudo modprobe ath5k debug=0x00000400[\n][ 	]*[\n]\([ 	]*Band[^\n]*[\n]\([ 	]*\(\(channels\|rates\):\|[- 	0-9a-f]*\|\[\.\.\. etc \]\)[\n]\)\+\)\+       540 000c 0000 0000'
    oprepline '	{ 1, MODULATION_XR, 3000, 1, 150, 3 },'
    ;;
  */linux-2.6-drm-i915-modeset.patch)
    initnc 'static const u32 filter_table\[\] ='
    ;;
  */linux-2.6-netdev-e1000e*.patch)
    # drivers/net/e1000e/phy.c
    initnc 'static const u16 e1000_igp_2_cable_length_table\[\] ='
    ;;
  esac
}  

# Regular expression that matches a literal constant.
constx="[0-9][0-9a-fA-FxX]*"
# Regular expression that matches a separator between consecutive
# literal constants.
sepx="\\([,:{} 	\\nLlUu\"\'\\\\]\\+[xX\$]\\?\\|[ 	\\n]*[.][a-zA-Z][a-zA-Z0-9]*[ 	]\\+[\$]\\?\\)"

# Regular expression that matches a continuation of a blob, after an
# initial constant.  *, \+ and \? can be safely appended to it without
# \(\)s.
blobcont="\\($sepx$constx\\)"

# Regular expression that matches the initial constant of a blob plus
# its continuation.  *, \+ and \? can be safely appended to it without
# \(\)s.
blobpat="$constx$blobcont"

# Regular expression that matches a blob with the exact number of
# constants specified as sensitivity.
blobseq="$blobpat\\{$sens\\}"

# Regular expression that matches a blob with the exact specified
# length, or longer.
blobfseq="$blobseq$blobcont*"

# Regular expression that matches the beginning of the pattern or a
# line break.  It must be \(\)ed, such that it can be named in
# replacement patterns without being named.
bol="\\(^\\|[\\n]\\)"

# Regular expression that matches the end of the pattern or a line
# break.  It must be \(\)ed, such that it can be named in replacement
# patterns without being named.
eol="\\([\\n]\\|\$\\)"

# Regular expression that matches a C-style comment.
comment="\\([/][*]\\([^*]*\\|[*]\\+[^/*]\\)*[*]\\+[/]\\|[/][/][^\\n]*[\\n]\\)"

# Regular expression that matches comments typically used in assembly.
asmcomment="\\($comment\\|[;#][^\\n]*[\\n]\\)"

# Regular expression that matches a braced initializer containing at
# least one blob.
initblob="[^\\n]*=\\([ 	\\n\\\\]*\\|$comment\\)*{\\([^;]*\\|$comment\\)*$blobseq\\([^;]*\\|$comment\\)*}\\?\\([ 	\\n\\\\]*\\|$comment\\);\\?"

# Regular expression that matches a C (possibly multi-line) #define
# that contains a blob.
defineblob='[ 	]*#[ 	]*define[ 	]\+\([^\n]*\\[\n]\)*[^\n]*'"$blobseq"'\([^\n]*\\[\n]\)*'

# Regular expression that matches an assembly label followed by a blob
# without any intervening label.
asmblob="[a-zA-Z_.][^\\n:;#/ 	]*[ ]*:\\([^:]*\\|$asmcomment\\)*$blobseq\\([^:]*\\|$asmcomment\\)*"

# Regular expression that matches one or more blobs without
# intervening line breaks.
sblobctx="\\([^\\n]*$blobfseq\\)\\+"

# Regular expression that matches the context for a long blob match.
lblobctx="\\($initblob\\|$defineblob\\|$asmblob\\|$sblobctx\\)"

# Set up the sed script that will go through the (processed) input,
# looking for sequences of blobs and printing whatever was requested.
# It accepts 3 arguments.

# $1 is the action in case blobs were found in the input.

# $2 is the action in case no blobs were found, not even false positives.

# $3 is the action in case false positives were located.

# $4 is the action for every complete input pattern.

set_sedmain () {
  falsepos=`sed 's,^\\\|,,;s,^,\\\\(,;s,$,\\\\),' < "$falsepos_name"`

  if test -s "$falsepos_name"; then
    check_false_positives="$v:???falsepos
/$bol$falsepos/!b blob;
$v:+++falsepos
h;
s/$bol$falsepos/\\1;\/**\/;/g;
# See if, after removing all matches, we end up without any blobs.
$v:???blobseq
/$blobseq/!{
  g;
  b falsepos;
}
g;
"
  else
    falsepos="$^"
    check_false_positives=
  fi

  sedmain="
/^;[/][*]\\(end .*\\)\\?[*][/];$/{
  $4;
  d;
}
/^;[/][*]begin /!{
  : internal_error
  i\\
Internal error at
  p;
  q 2;
}
$v:reading file in
h;
n;
: read_more
/^;[/][*]end [^\\n]*[*][/];$/! {
  H;
  n;
  b read_more;
}
H;
g;
$4
s/^\(;[/][*]begin [^\n]*[\n]\)*//;
s/\\($bol;[/][*]\\(end [^\n]*\\)\\?[*][/];\\)*$//;
$v:???!blobseq
/$blobseq/!b clean;
$check_false_positives
# Fall through.
: blob
$v:blob
$1
d;
: clean
$2
d;
: falsepos
$v:falsepos
$3
d;

: print_matches
$v:print_matches
/^$falsepos/! {
  $v:delete unmatching lines
  h;
  s/[\\n]$falsepos.*//;
  : print_matches_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b print_matches_nomatch_loop;
  }
  x;
  b print_matches_delete_to_eol;
}
h;
s/^\\($falsepos[^\\n]*\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to match
/$blobfseq/ {
  i\\
::: $file :::
  p;
}
g;
s/^\\($falsepos[^\\n]*\\)//;
: print_matches_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b print_matches;

: print_marked_matches
$v:print_marked_matches
/^$falsepos/! {
  h;
  s/[\\n]$falsepos.*//;
  : print_marked_matches_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b print_marked_matches_nomatch_loop;
  }
  x;
  b print_marked_matches_delete_to_eol;
}
h;
s/^\\($falsepos[^\\n]*\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to match
/$blobfseq/{
  i\\
::: $file :::
  s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ 	]*;/{\/*(DEBLOBBED)*\/};/g;
  s/$blobfseq/\/*(DEBLOBBED)*\//g;
  p;
}
g;
s/^\\($falsepos[^\\n]*\\)//;
: print_marked_matches_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b print_marked_matches;

: print_blobs
$v:print_blobs
/^$falsepos/ {
  $v:delete false positive
  # This is tricky.  We don't want to print the false positive.
  /^$falsepos[^\\n]*$blobseq/ {
    $v:delete false positive immediately followed by blob
    h;
    s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
    : print_blobs_match_loop
    /[\\n]/ {
      s/^[^\\n]*[\\n]//;
      x;
      s/^[^\\n]*[\\n]//;
      x;
      b print_blobs_match_loop;
    }
    G;
    b print_blobs_delete_to_eol;
  }
  s/^$falsepos//;
  b print_blobs_delete_to_eol;
}
/^[^\\n]*$blobseq/! {
  $v:delete non-blob header
  h;
  s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
  : print_blobs_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b print_blobs_nomatch_loop;
  }
  x;
  b print_blobs_delete_to_eol;
}
h;
i\\
::: $file :::
s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to blob
p;
g;
s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)//;
: print_blobs_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b print_blobs;

: print_marked_blobs
$v:print_marked_blobs
/^$falsepos/ {
  $v:delete false positive
  # This is tricky.  We don't want to print the false positive.
  /^$falsepos[^\\n]*$blobseq/ {
    $v:delete false positive immediately followed by blob
    h;
    s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
    : print_marked_blobs_match_loop
    /[\\n]/ {
      s/^[^\\n]*[\\n]//;
      x;
      s/^[^\\n]*[\\n]//;
      x;
      b print_marked_blobs_match_loop;
    }
    G;
    b print_marked_blobs_delete_to_eol;
  }
  s/^falsepos//;
  b print_marked_blobs_delete_to_eol;
}
/^[^\\n]*$blobseq/! {
  $v:delete non-blob header
  h;
  s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
  : print_marked_blobs_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b print_marked_blobs_nomatch_loop;
  }
  x;
  b print_marked_blobs_delete_to_eol;
}
h;
i\\
::: $file :::
s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to blob
s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ 	]*;/{\/*(DEBLOBBED)*\/};/g;
s/$blobfseq/\/*(DEBLOBBED)*\//g;
p;
g;
s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)//;
: print_marked_blobs_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b print_marked_blobs;

: print_cblobs
$v:print_cblobs
/^$falsepos/ {
  $v:delete false positive
  # This is tricky.  We don't want to print the false positive.
  /^$falsepos[^\\n]*$blobseq/ {
    $v:delete false positive immediately followed by blob
    h;
    s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
    : print_cblobs_match_loop
    /[\\n]/ {
      s/^[^\\n]*[\\n]//;
      x;
      s/^[^\\n]*[\\n]//;
      x;
      b print_cblobs_match_loop;
    }
    G;
    b print_cblobs_delete_to_eol;
  }
  s/^$falsepos//;
  b print_cblobs_delete_to_eol;
}
/^$lblobctx/! {
  $v:delete non-blob header
  h;
  s/[\\n]\\($falsepos\\|$lblobctx\\).*//;
  : print_cblobs_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b print_cblobs_nomatch_loop;
  }
  x;
  b print_cblobs_delete_to_eol;
}
h;
i\\
::: $file :::
s/^\\($lblobctx[^\\n]*\\($blobfseq[^\\n]*\\)*\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to blob
p;
g;
s/^\\($lblobctx[^\\n]*\\($blobfseq[^\\n]*\\)*\\)//;
: print_cblobs_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b print_cblobs;

: print_marked_cblobs
$v:print_marked_cblobs
/^$falsepos/ {
  $v:delete false positive
  # This is tricky.  We don't want to print the false positive.
  /^$falsepos[^\\n]*$blobseq/ {
    $v:delete false positive immediately followed by blob
    h;
    s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
    : print_marked_cblobs_match_loop
    /[\\n]/ {
      s/^[^\\n]*[\\n]//;
      x;
      s/^[^\\n]*[\\n]//;
      x;
      b print_marked_cblobs_match_loop;
    }
    G;
    b print_marked_cblobs_delete_to_eol;
  }
  s/^$falsepos//;
  b print_marked_cblobs_delete_to_eol;
}
/^$lblobctx/! {
  $v:delete non-blob header
  h;
  s/[\\n]\\($falsepos\\|$lblobctx\\).*//;
  : print_marked_cblobs_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b print_marked_cblobs_nomatch_loop;
  }
  x;
  b print_marked_cblobs_delete_to_eol;
}
h;
i\\
::: $file :::
s/^\\($lblobctx[^\\n]*\\($blobfseq[^\\n]*\\)*\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to blob
s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ 	]*;/{\/*(DEBLOBBED)*\/};/g;
s/$blobfseq/\/*(DEBLOBBED)*\//g;
p;
g;
s/^\\($lblobctx[^\\n]*\\($blobfseq[^\\n]*\\)*\\)//;
: print_marked_cblobs_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b print_marked_cblobs;

: print_both
$v:print_both
/^\\($falsepos\\|[^\\n]*$blobseq\\)/! {
  $v:delete non-blob header
  h;
  s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
  : print_both_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b print_both_nomatch_loop;
  }
  x;
  b print_both_delete_to_eol;
}
h;
i\\
::: $file :::
s/^\\(\\($falsepos[^\\n]*\\|[^\\n]*$blobfseq[^\\n]*\\)\\($blobfseq[^\\n]*\\)*\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to blob
p;
g;
s/^\\(\\($falsepos[^\\n]*\\|[^\\n]*$blobfseq[^\\n]*\\)\\($blobfseq[^\\n]*\\)*\\)//;
: print_both_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b print_both;

: list_matches
$v:list_matches
/^$falsepos/! {
  $v:print unmatching lines
  h;
  s/[\\n]$falsepos.*//;
  p;
  : list_matches_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b list_matches_nomatch_loop;
  }
  x;
  b list_matches_delete_to_eol;
}
h;
s/^\\($falsepos[^\\n]*\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to match
/$blobfseq/{
  s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ 	]*;/{\/*(DEBLOBBED)*\/};/g;
  s/$blobfseq/\/*(DEBLOBBED)*\//g;
}
p;
g;
s/^\\($falsepos[^\\n]*\\)//;
: list_matches_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b list_matches;

: list_blobs
$v:list_blobs
/^$falsepos/ {
  $v:print false positive
  # This is tricky.  We don't want to deblob the false positive.
  /^$falsepos[^\\n]*$blobseq/ {
    $v:print false positive immediately followed by blob
    h;
    s/^\\($falsepos\\)[^\\n]*$blobseq.*/\\1/;
    : list_blobs_match_loop
    /[\\n]/ {
      P;
      s/^[^\\n]*[\\n]//;
      x;
      s/^[^\\n]*[\\n]//;
      x;
      b list_blobs_match_loop;
    }
    G;
    b list_blobs_delete_to_eol;
  }
  h;
  s/^\\($falsepos[^\\n]*\\)[\\n].*/\\1/;
  p;
  g;
  s/^\\($falsepos[^\\n]*\\)//;
  b list_blobs_delete_to_eol;
}
/^[^\\n]*$blobseq/! {
  $v:print non-blob header
  h;
  s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
  p;
  : list_blobs_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b list_blobs_nomatch_loop;
  }
  x;
  b list_blobs_delete_to_eol;
}
h;
s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to blob
s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ 	]*;/{\/*(DEBLOBBED)*\/};/g;
s/$blobfseq/\/*(DEBLOBBED)*\//g;
p;
g;
s/^\\([^\\n]*\\($blobfseq[^\\n]*\\)\\+\\)//;
: list_blobs_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b list_blobs;

: list_both
$v:list_both
/^\\($falsepos\\|[^\\n]*$blobseq\\)/! {
  $v:print non-blob header
  h;
  s/[\\n]\\($falsepos\\|[^\\n]*$blobseq\\).*//;
  p;
  : list_both_nomatch_loop
  /[\\n]/ {
    s/^[^\\n]*[\\n]//;
    x;
    s/^[^\\n]*[\\n]//;
    x;
    b list_both_nomatch_loop;
  }
  x;
  b list_both_delete_to_eol;
}
h;
s/^\\(\\($falsepos[^\\n]*\\|[^\\n]*$blobfseq[^\\n]*\\)\\($blobfseq[^\\n]*\\)*\\)\\([\\n].*\\)\\?$/\\1/;
$v:narrowed to blob
s/{\\($sepx\\)\\?$blobfseq\\($sepx\\)\\?}[ 	]*;/{\/*(DEBLOBBED)*\/};/g;
s/$blobfseq/\/*(DEBLOBBED)*\//g;
p;
g;
s/^\\(\\($falsepos[^\\n]*\\|[^\\n]*$blobfseq[^\\n]*\\)\\($blobfseq[^\\n]*\\)*\\)//;
: list_both_delete_to_eol
$v:delete to eol
s/^[^\\n]*//;
/^$/d;
s/^[\\n]//;
b list_both;

"
}

# Process an input file named in $1 and run it through the blob
# recognizer.  Functions set_except and set_sed_cmd provide additional
# arguments on a per-file and per-action basis.

check () {
  case "$#" in 1) ;; *) echo ICE >&2; exit 1;; esac

  input=$1

  falsepos_name=`mktemp -t deblob-check-falsepos-XXXXXX`
  tempfiles="$falsepos_name"

  # Add $1 to falsepos.  Its usage makes it implicitly anchored to
  # the beginning of the line.
  addx () {
    if test -n "$1"; then
      echo -n "\\|$1" >> $falsepos_name
    fi
  }

  set_except "$input"

  set_sed_cmd "$input"

  rm -f "$falsepos_name"
  tempfiles=

  # Choose the input source...
  case $input in
  -) in= ;;
  *) in='< "$input"' ;;
  esac

  set fnord # shifted out below

  # Decompress as needed...
  case $input in
  *.bz2) cmd='bunzip2' ;;
  *.gz) cmd='gunzip' ;;
  *) cmd= ;;
  esac
  if test -n "$cmd"; then
    set "$@" "$cmd"
  fi

  # Extract or otherwise munge...
  case $input in
  *.tar*)
    cmd="tar -xf - --to-command='echo \";/*begin \$TAR_FILENAME*/;\"; cat; echo \";/**/;\"; echo \";/*end \$TAR_FILENAME*/;\"'"
    ;;
  *patch* | *diff*)
    sedpatch='
      /^[-]/d;
      /^\(@@\|+++\) / {
	i\
;/**/;\
;/*end patchlet */;\
;/*begin patchlet */;
	s/^/;\/*/;
	s/$/*\/;/;
      };
      s/^[ +]//;'
    cmd='sed "$sedpatch"'
    ;;
  *)
    cmd='cat'
    ;;
  esac
  cmd="{ echo \";/*begin $input*/;\"; $cmd; echo \";/*end $input*/;\"; }"
  set "$@" "$cmd"

  case $input in
  *.tar*)
    cmd="{ cat; cat > /dev/null; }"
    set "$@" "$cmd"
    ;;
  esac

  # Then run through the selected action.
  if test "$rm" != "rm -f" || test ! `echo "$sedmain" | wc -c` -lt 1024; then
    scriptname=`mktemp -t deblob-check-sedmain-XXXXXX`
    tempfiles="$tempfiles $scriptname"
    echo "$sedmain" > $scriptname
    cmd="sed -n -f \"$scriptname\""
  else
    cmd='sed -n "$sedmain"'
  fi
  set "$@" "$cmd"

  test $# != 1 || set "$@" "cat"

  shift # fnord goes out here

  pipe=
  for cmd
  do
    if test -z "$pipe"; then
      pipe="$cmd $in"
    else
      pipe="$pipe | $cmd"
    fi
  done

  eval "$pipe"
  status=$?

  $rm $tempfiles
  tempfiles=

  (exit $status)
}

# If no input given, use stdin.
case $# in
0)
  test -t 0 && echo reading from standard input >&2
  set fnord -
  shift
  ;;
esac

# The lines below commented out out #list: can be used to get a list
# of matching inputs.  ATM this is useless, so we just use a shell
# boolean.

#list: n=$#
pass=:

tempfiles=
trap "status=$?; test -z \"$tempfiles\" || rm -f $tempfiles; (exit $status); exit" 0 1 2 15

# Go through each of the input files in the command line.
for file
do
  # If we print anything whatsoever (even a blank line) while
  # processing it, we've failed.
  if check "$file"; then
    :
  else
    pass=false
    #list: set fnord "$@" "$file"
    #list: shift
  fi
done

#list: shift $n

#list: exec test $# = 0
$pass
exit