libreCMC-cmh/target/linux/generic/patches-4.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch

--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -36,6 +36,9 @@
 #define AT803X_INER				0x0012
 #define AT803X_INER_INIT			0xec00
 #define AT803X_INSR				0x0013
+#define AT803X_REG_CHIP_CONFIG			0x1f
+#define AT803X_BT_BX_REG_SEL			0x8000
+#define AT803X_SGMII_ANEG_EN			0x1000
 
 #define AT803X_PCS_SMART_EEE_CTRL3			0x805D
 #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK	0x3
@@ -49,9 +52,10 @@
 #define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
 #define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
 
-#define ATH8030_PHY_ID 0x004dd076
-#define ATH8031_PHY_ID 0x004dd074
-#define ATH8035_PHY_ID 0x004dd072
+#define AT803X_PHY_ID_MASK			0xffffffef
+#define ATH8030_PHY_ID				0x004dd076
+#define ATH8031_PHY_ID				0x004dd074
+#define ATH8035_PHY_ID				0x004dd072
 
 MODULE_DESCRIPTION("Atheros 803x PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
@@ -268,6 +272,27 @@ static int at803x_config_init(struct phy
 {
 	struct at803x_platform_data *pdata;
 	int ret;
+	u32 v;
+
+	if (phydev->drv->phy_id == ATH8031_PHY_ID &&
+		phydev->interface == PHY_INTERFACE_MODE_SGMII)
+	{
+		v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
+		/* select SGMII/fiber page */
+		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
+						v & ~AT803X_BT_BX_REG_SEL);
+		if (ret)
+			return ret;
+		/* enable SGMII autonegotiation */
+		ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
+		if (ret)
+			return ret;
+		/* select copper page */
+		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
+						v | AT803X_BT_BX_REG_SEL);
+		if (ret)
+			return ret;
+	}
 
 	ret = genphy_config_init(phydev);
 	if (ret < 0)
@@ -394,7 +419,7 @@ static struct phy_driver at803x_driver[]
 	/* ATHEROS 8035 */
 	.phy_id			= ATH8035_PHY_ID,
 	.name			= "Atheros 8035 ethernet",
-	.phy_id_mask		= 0xffffffef,
+	.phy_id_mask		= AT803X_PHY_ID_MASK,
 	.probe			= at803x_probe,
 	.config_init		= at803x_config_init,
 	.link_change_notify	= at803x_link_change_notify,
@@ -415,7 +440,7 @@ static struct phy_driver at803x_driver[]
 	/* ATHEROS 8030 */
 	.phy_id			= ATH8030_PHY_ID,
 	.name			= "Atheros 8030 ethernet",
-	.phy_id_mask		= 0xffffffef,
+	.phy_id_mask		= AT803X_PHY_ID_MASK,
 	.probe			= at803x_probe,
 	.config_init		= at803x_config_init,
 	.link_change_notify	= at803x_link_change_notify,
@@ -435,8 +460,8 @@ static struct phy_driver at803x_driver[]
 }, {
 	/* ATHEROS 8031 */
 	.phy_id			= ATH8031_PHY_ID,
-	.name			= "Atheros 8031 ethernet",
-	.phy_id_mask		= 0xffffffef,
+	.name			= "Atheros 8031/8033 ethernet",
+	.phy_id_mask		= AT803X_PHY_ID_MASK,
 	.probe			= at803x_probe,
 	.config_init		= at803x_config_init,
 	.link_change_notify	= at803x_link_change_notify,
@@ -458,9 +483,9 @@ static struct phy_driver at803x_driver[]
 module_phy_driver(at803x_driver);
 
 static struct mdio_device_id __maybe_unused atheros_tbl[] = {
-	{ ATH8030_PHY_ID, 0xffffffef },
-	{ ATH8031_PHY_ID, 0xffffffef },
-	{ ATH8035_PHY_ID, 0xffffffef },
+	{ ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
+	{ ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
+	{ ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
 	{ }
 };