Minoca-os/uefi/plat/panda/armv7/entry.S

/*++

Copyright (c) 2014 Minoca Corp. All Rights Reserved

Module Name:

    entry.s

Abstract:

    This module implements the initial entry point into the ARMv7 firmware. Its
    job is to do essential initialization and call the C main function.

Author:

    Evan Green 27-Feb-2014

Environment:

    MBR

--*/

##
## ------------------------------------------------------------------- Includes
##

#include <minoca/kernel/arm.inc>

##
## ---------------------------------------------------------------- Definitions
##

.equ STACK_SIZE,    0x4000

##
## ----------------------------------------------------------------------- Code
##

##
## .text specifies that this code belongs in the executable section. This is
## the only section in the MBR code, data also lives in the text section.
## .arm specifies that this code should be compiled in ARM mode.
##

.text
.arm

##
## .global allows this label to be visible to the linker. _start is the entry
## point to the MBR code, so it needs to be globally visible.
##

.global _start

##
## This is the entry point for the ARM boot loader. It changes to SVC mode,
## sets up the initial stack, and jumps to the main loader.
##

_start:

    ##
    ## Disable interrupts and switch to SVC mode.
    ##

    mov     %r2, #(PSR_FLAG_IRQ | ARM_MODE_SVC)
    msr     CPSR_c, %r2

    ##
    ## Flip some essential MMU bits allowing unaligned accesses.
    ##

    mrc     p15, 0, %r0, %cr1, %cr0, 0
    bic     %r0, %r0, #MMU_ALIGNMENT_FAULT_ENABLED
    orr     %r0, %r0, #MMU_UNALIGNED_ACCESS_ENABLED
    mcr     p15, 0, %r0, %cr1, %cr0, 0

    ##
    ## Zero out the BSS section.
    ##

    ldr     %r1, =__bss_start__
    ldr     %r2, =__bss_end__
    mov     %r0, #0

BssZeroLoop:
    str     %r0, [%r1], #4
    cmp     %r1, %r2
    blt     BssZeroLoop

    ##
    ## The stack starts at the image base and works downwards.
    ##

    adr     %r0, _start             @ Get the current address for the stack top.
    ldr     %r1, =STACK_SIZE        @ Get the stack size.
    mov     %sp, %r0                @ Set the stack.
    mov     %r11, #0                @ Zero the ARM frame pointer.
    mov     %r7, #0                 @ Zero out the Thumb frame pointer.
    mov     %r2, %r7                @ Zero out another temporary register.
    push    {%r2, %r7}              @ Create an empty stack frame for debugging.
    blx     EfiPandaBoardMain

LoopForever:
    b       LoopForever