harvey/sys/doc/sleep.ms

.HTML "Process Sleep and Wakeup on a Shared-memory Multiprocessor
.TL
Process Sleep and Wakeup on a Shared-memory Multiprocessor
.AU
Rob Pike
Dave Presotto
Ken Thompson
Gerard Holzmann
.sp
rob,presotto,ken,gerard@plan9.bell-labs.com
.AB
.FS
Appeared in a slightly different form in
.I
Proceedings of the Spring 1991 EurOpen Conference,
.R
Tromsø, Norway, 1991, pp. 161-166.
.FE
The problem of enabling a `sleeping' process on a shared-memory multiprocessor
is a difficult one, especially if the process is to be awakened by an interrupt-time
event.  We present here the code
for sleep and wakeup primitives that we use in our multiprocessor system.
The code has been exercised by years of active use and by a verification
system.
.AE
.LP
Our problem is to synchronise processes on a symmetric shared-memory multiprocessor.
Processes suspend execution, or
.I sleep,
while awaiting an enabling event such as an I/O interrupt.
When the event occurs, the process is issued a
.I wakeup
to resume its execution.
During these events, other processes may be running and other interrupts
occurring on other processors.
.LP
More specifically, we wish to implement subroutines called
.CW sleep ,
callable by a process to relinquish control of its current processor,
and
.CW wakeup ,
callable by another process or an interrupt to resume the execution
of a suspended process.
The calling conventions of these subroutines will remain unspecified
for the moment.
.LP
We assume the processors have an atomic test-and-set or equivalent
operation but no other synchronisation method.  Also, we assume interrupts
can occur on any processor at any time, except on a processor that has
locally inhibited them.
.LP
The problem is the generalisation to a multiprocessor of a familiar
and well-understood uniprocessor problem.  It may be reduced to a
uniprocessor problem by using a global test-and-set to serialise the
sleeps and wakeups,
which is equivalent to synchronising through a monitor.
For performance and cleanliness, however,
we prefer to allow the interrupt handling and process control to be multiprocessed.
.LP
Our attempts to solve the sleep/wakeup problem in Plan 9
[Pik90]
prompted this paper.
We implemented solutions several times over several months and each
time convinced ourselves \(em wrongly \(em they were correct.
Multiprocessor algorithms can be
difficult to prove correct by inspection and formal reasoning about them
is impractical.  We finally developed an algorithm we trust by
verifying our code using an
empirical testing tool.
We present that code here, along with some comments about the process by
which it was designed.
.SH
History
.LP
Since processes in Plan 9 and the UNIX
system have similar structure and properties, one might ask if
UNIX
.CW sleep
and
.CW wakeup
[Bac86]
could not easily be adapted from their standard uniprocessor implementation
to our multiprocessor needs.
The short answer is, no.
.LP
The
UNIX
routines
take as argument a single global address
that serves as a unique
identifier to connect the wakeup with the appropriate process or processes.
This has several inherent disadvantages.
From the point of view of
.CW sleep
and
.CW wakeup ,
it is difficult to associate a data structure with an arbitrary address;
the routines are unable to maintain a state variable recording the
status of the event and processes.
(The reverse is of course easy \(em we could
require the address to point to a special data structure \(em
but we are investigating
UNIX
.CW sleep
and
.CW wakeup ,
not the code that calls them.)
Also, multiple processes sleep `on' a given address, so
.CW wakeup
must enable them all, and let process scheduling determine which process
actually benefits from the event.
This is inefficient;
a queueing mechanism would be preferable
but, again, it is difficult to associate a queue with a general address.
Moreover, the lack of state means that
.CW sleep
and
.CW wakeup
cannot know what the corresponding process (or interrupt) is doing;
.CW sleep
and
.CW wakeup
must be executed atomically.
On a uniprocessor it suffices to disable interrupts during their
execution.
On a multiprocessor, however,
most processors
can inhibit interrupts only on the current processor,
so while a process is executing
.CW sleep
the desired interrupt can come and go on another processor.
If the wakeup is to be issued by another process, the problem is even harder.
Some inter-process mutual exclusion mechanism must be used,
which, yet again, is difficult to do without a way to communicate state.
.LP
In summary, to be useful on a multiprocessor,
UNIX
.CW sleep
and
.CW wakeup
must either be made to run atomically on a single
processor (such as by using a monitor)
or they need a richer model for their communication.
.SH
The design
.LP
Consider the case of an interrupt waking up a sleeping process.
(The other case, a process awakening a second process, is easier because
atomicity can be achieved using an interlock.)
The sleeping process is waiting for some event to occur, which may be
modeled by a condition coming true.
The condition could be just that the event has happened, or something
more subtle such as a queue draining below some low-water mark.
We represent the condition by a function of one
argument of type
.CW void* ;
the code supporting the device generating the interrupts
provides such a function to be used by
.CW sleep
and
.CW wakeup
to synchronise.  The function returns
.CW false
if the event has not occurred, and
.CW true
some time after the event has occurred.
The
.CW sleep
and
.CW wakeup
routines must, of course, work correctly if the
event occurs while the process is executing
.CW sleep .
.LP
We assume that a particular call to
.CW sleep
corresponds to a particular call to
.CW wakeup ,
that is,
at most one process is asleep waiting for a particular event.
This can be guaranteed in the code that calls
.CW sleep
and
.CW wakeup
by appropriate interlocks.
We also assume for the moment that there will be only one interrupt
and that it may occur at any time, even before
.CW sleep
has been called.
.LP
For performance,
we desire that multiple instances of
.CW sleep
and
.CW wakeup
may be running simultaneously on our multiprocessor.
For example, a process calling
.CW sleep
to await a character from an input channel need not
wait for another process to finish executing
.CW sleep
to await a disk block.
At a finer level, we would like a process reading from one input channel
to be able to execute
.CW sleep
in parallel with a process reading from another input channel.
A standard approach to synchronisation is to interlock the channel `driver'
so that only one process may be executing in the channel code at once.
This method is clearly inadequate for our purposes; we need
fine-grained synchronisation, and in particular to apply
interlocks at the level of individual channels rather than at the level
of the channel driver.
.LP
Our approach is to use an object called a
.I rendezvous ,
which is a data structure through which
.CW sleep
and
.CW wakeup
synchronise.
(The similarly named construct in Ada is a control structure;
ours is an unrelated data structure.)
A rendezvous
is allocated for each active source of events:
one for each I/O channel,
one for each end of a pipe, and so on.
The rendezvous serves as an interlockable structure in which to record
the state of the sleeping process, so that
.CW sleep
and
.CW wakeup
can communicate if the event happens before or while
.CW sleep
is executing.
.LP
Our design for
.CW sleep
is therefore a function
.P1
void sleep(Rendezvous *r, int (*condition)(void*), void *arg)
.P2
called by the sleeping process.
The argument
.CW r
connects the call to
.CW sleep
with the call to
.CW wakeup ,
and is part of the data structure for the (say) device.
The function
.CW condition
is described above;
called with argument
.CW arg ,
it is used by
.CW sleep
to decide whether the event has occurred.
.CW Wakeup
has a simpler specification:
.P1
void wakeup(Rendezvous *r).
.P2
.CW Wakeup
must be called after the condition has become true.
.SH
An implementation
.LP
The
.CW Rendezvous
data type is defined as
.P1
typedef struct{
	Lock	l;
	Proc	*p;
}Rendezvous;
.P2
Our
.CW Locks
are test-and-set spin locks.
The routine
.CW lock(Lock\ *l)
returns when the current process holds that lock;
.CW unlock(Lock\ *l)
releases the lock.
.LP
Here is our implementation of
.CW sleep .
Its details are discussed below.
.CW Thisp
is a pointer to the current process on the current processor.
(Its value differs on each processor.)
.P1
void
sleep(Rendezvous *r, int (*condition)(void*), void *arg)
{
	int s;

	s = inhibit();		/* interrupts */
	lock(&r->l);

	/*
	 * if condition happened, never mind
	 */
	if((*condition)(arg)){	
		unlock(&r->l);
		allow();	/* interrupts */
		return;
	}

	/*
	 * now we are committed to
	 * change state and call scheduler
	 */
	if(r->p)
		error("double sleep %d %d", r->p->pid, thisp->pid);
	thisp->state = Wakeme;
	r->p = thisp;
	unlock(&r->l);
	allow(s);	/* interrupts */
	sched();	/* relinquish CPU */
}
.P2
.ne 3i
Here is
.CW wakeup.
.P1
void
wakeup(Rendezvous *r)
{
	Proc *p;
	int s;

	s = inhibit();	/* interrupts; return old state */
	lock(&r->l);
	p = r->p;
	if(p){
		r->p = 0;
		if(p->state != Wakeme)
			panic("wakeup: not Wakeme");
		ready(p);
	}
	unlock(&r->l);
	if(s)
		allow();
}
.P2
.CW Sleep
and
.CW wakeup
both begin by disabling interrupts
and then locking the rendezvous structure.
Because
.CW wakeup
may be called in an interrupt routine, the lock must be set only
with interrupts disabled on the current processor,
so that if the interrupt comes during
.CW sleep
it will occur only on a different processor;
if it occurred on the processor executing
.CW sleep ,
the spin lock in
.CW wakeup
would hang forever.
At the end of each routine, the lock is released and processor priority
returned to its previous value.
.CW Wakeup "" (
needs to inhibit interrupts in case
it is being called by a process;
this is a no-op if called by an interrupt.)
.LP
.CW Sleep
checks to see if the condition has become true, and returns if so.
Otherwise the process posts its name in the rendezvous structure where
.CW wakeup
may find it, marks its state as waiting to be awakened
(this is for error checking only) and goes to sleep by calling
.CW sched() .
The manipulation of the rendezvous structure is all done under the lock,
and
.CW wakeup
only examines it under lock, so atomicity and mutual exclusion
are guaranteed.
.LP
.CW Wakeup
has a simpler job.  When it is called, the condition has implicitly become true,
so it locks the rendezvous, sees if a process is waiting, and readies it to run.
.SH
Discussion
.LP
The synchronisation technique used here
is similar to known methods, even as far back as Saltzer's thesis
[Sal66].
The code looks trivially correct in retrospect: all access to data structures is done
under lock, and there is no place that things may get out of order.
Nonetheless, it took us several iterations to arrive at the above
implementation, because the things that
.I can
go wrong are often hard to see.  We had four earlier implementations
that were examined at great length and only found faulty when a new,
different style of device or activity was added to the system.
.LP
.ne 3i
Here, for example, is an incorrect implementation of wakeup,
closely related to one of our versions.
.P1
void
wakeup(Rendezvous *r)
{
	Proc *p;
	int s;

	p = r->p;
	if(p){
		s = inhibit();
		lock(&r->l);
		r->p = 0;
		if(p->state != Wakeme)
			panic("wakeup: not Wakeme");
		ready(p);
		unlock(&r->l);
		if(s)
			allow();
	}
}
.P2
The mistake is that the reading of
.CW r->p
may occur just as the other process calls
.CW sleep ,
so when the interrupt examines the structure it sees no one to wake up,
and the sleeping process misses its wakeup.
We wrote the code this way because we reasoned that the fetch
.CW p
.CW =
.CW r->p
was inherently atomic and need not be interlocked.
The bug was found by examination when a new, very fast device
was added to the system and sleeps and interrupts were closely overlapped.
However, it was in the system for a couple of months without causing an error.
.LP
How many errors lurk in our supposedly correct implementation above?
We would like a way to guarantee correctness; formal proofs are beyond
our abilities when the subtleties of interrupts and multiprocessors are
involved.
With that in mind, the first three authors approached the last to see
if his automated tool for checking protocols
[Hol91]
could be
used to verify our new
.CW sleep
and
.CW wakeup
for correctness.
The code was translated into the language for that system
(with, unfortunately, no way of proving that the translation is itself correct)
and validated by exhaustive simulation.
.LP
The validator found a bug.
Under our assumption that there is only one interrupt, the bug cannot
occur, but in the more general case of multiple interrupts synchronising
through the same condition function and rendezvous,
the process and interrupt can enter a peculiar state.
A process may return from
.CW sleep
with the condition function false
if there is a delay between
the condition coming true and
.CW wakeup
being called,
with the delay occurring
just as the receiving process calls
.CW sleep .
The condition is now true, so that process returns immediately,
does whatever is appropriate, and then (say) decides to call
.CW sleep
again.  This time the condition is false, so it goes to sleep.
The wakeup process then finds a sleeping process,
and wakes it up, but the condition is now false.
.LP
There is an easy (and verified) solution: at the end of
.CW sleep
or after
.CW sleep
returns,
if the condition is false, execute
.CW sleep
again.  This re-execution cannot repeat; the second synchronisation is guaranteed
to function under the external conditions we are supposing.
.LP
Even though the original code is completely
protected by interlocks and had been examined carefully by all of us
and believed correct, it still had problems.
It seems to us that some exhaustive automated analysis is
required of multiprocessor algorithms to guarantee their safety.
Our experience has confirmed that it is almost impossible to
guarantee by inspection or simple testing the correctness
of a multiprocessor algorithm.  Testing can demonstrate the presence
of bugs but not their absence
[Dij72].
.LP
We close by claiming that the code above with
the suggested modification passes all tests we have for correctness
under the assumptions used in the validation.
We would not, however, go so far as to claim that it is universally correct.
.SH
References
.LP
[Bac86] Maurice J. Bach,
.I "The Design of the UNIX Operating System,
Prentice-Hall,
Englewood Cliffs,
1986.
.LP
[Dij72] Edsger W. Dijkstra,
``The Humble Programmer \- 1972 Turing Award Lecture'',
.I "Comm. ACM,
15(10), pp. 859-866, 
October 1972.
.LP
[Hol91] Gerard J. Holzmann,
.I "Design and Validation of Computer Protocols,
Prentice-Hall,
Englewood Cliffs,
1991.
.LP
[Pik90]
Rob Pike,
Dave Presotto,
Ken Thompson,
Howard Trickey,
``Plan 9 from Bell Labs'',
.I "Proceedings of the Summer 1990 UKUUG Conference,
pp. 1-9,
London,
July, 1990.
.LP
[Sal66] Jerome H. Saltzer,
.I "Traffic Control in a Multiplexed Computer System
MIT,
Cambridge, Mass.,
1966.