harvey/sys/lib/ghostscript/gs_cidfn.ps

%    Copyright (C) 1995, 2000 Aladdin Enterprises.  All rights reserved.
% 
% This file is part of AFPL Ghostscript.
% 
% AFPL Ghostscript is distributed with NO WARRANTY OF ANY KIND.  No author or
% distributor accepts any responsibility for the consequences of using it, or
% for whether it serves any particular purpose or works at all, unless he or
% she says so in writing.  Refer to the Aladdin Free Public License (the
% "License") for full details.
% 
% Every copy of AFPL Ghostscript must include a copy of the License, normally
% in a plain ASCII text file named PUBLIC.  The License grants you the right
% to copy, modify and redistribute AFPL Ghostscript, but only under certain
% conditions described in the License.  Among other things, the License
% requires that the copyright notice and this notice be preserved on all
% copies.

% $Id: gs_cidfn.ps,v 1.18 2000/12/08 23:35:38 lpd Exp $
% ProcSet for implementing CIDFont and CIDMap resources.
% When this is run, systemdict is still writable.

% ---------------- Defining CIDFont resources ---------------- %

% Define a CIDFont resource.  This is the defineresource implementation for
% the CIDFont resource category.

/.checkfonttype {	% <cidfont> <fonttype> .checkfonttype <cidfont> <new?>
  1 index /FID known {
    1 index /FontType get ne {
      /definefont cvx /invalidfont signalerror
    } if false
  } {
    1 index /FontType 3 -1 roll put true
  } ifelse
} bind def

/.cidfonttypes where { pop } { /.cidfonttypes 6 dict def } ifelse
.cidfonttypes

30 dict begin

% The key in .cidfonttypes is the CIDFontType value;
% the value is a procedure that takes a font name and the CIDFont dictionary
% and replaces the latter with a real font.

% ------ CIDFontType 0 (FontType 9) ------ %

% We add the following entries to the CIDFont dictionary, in addition to
% the ones documented by Adobe:
%	SubrCache - dictionary for caching Subr arrays
% For CIDFonts where we read the data from disk incrementally:
%	GlyphData is 0 (arbitrary)
%	DataSource - a ReusableStreamDecode filter for the data
% We also add a FID entry, and possibly a Subrs entry, to each element of
% FDArray.

dup 0 {
  9 .checkfonttype {
    /CIDInit /ProcSet findresource begin
    .completefont9
    end
  } if
  1 index exch .buildfont9 exch pop
} bind put

% Add entries to a new CIDFontType 0 font per documentation (FontMatrix)
% or for .buildfont9 (FDArray.Private.Subrs).
/.completefont9 {	% <cidfont0> .completefont9 <cidfont0>
  currentglobal 3 1 roll dup gcheck setglobal
  dup /FontMatrix known not {
    dup /FontMatrix [0.001 0 0 0.001 0 0] put
    dup /FDArray get {
      /FontMatrix get [1000 0 0 1000 0 0] 1 index concatmatrix pop
    } forall
  } if
  dup /FDArray get {
		% Read the Subrs if necessary.
    dup /Private get dup /Subrs known not {
      dup /SubrCount .knownget {
		% Stack: font Private SubrCount
	currentglobal 3 1 roll 1 index gcheck setglobal
	array 1 index /Subrs 3 -1 roll put
		% Stack: font global Private
	2 index begin begin .loadsubrs end end
	setglobal
      } {
	pop
      } ifelse readonly pop
    } {
      pop pop
    } ifelse
  } forall
  3 -1 roll setglobal
} bind def

% Read some Subrs for the current Type 1 subfont.
% The subfont's Private dict is currentdict; the CIDFont itself is the
% next dictionary on the stack.
/.readsubrs {		% <Subrs> <start> .readsubrs <Subrs>
  1 SubrCount 1 sub {
    dup SDBytes mul SubrMapOffset add
    dup SDBytes .readint exch SDBytes add SDBytes .readint
    1 index sub string ReadString 2 index 3 1 roll put
  } for
} bind def

% Ensure that all the Subrs for the current Type 1 subfont are loaded.
% The subfont's Private dict is currentdict; the CIDFont itself is the
% next dictionary on the stack.
/.loadsubrs {
  Subrs length 0 ne {
    SubrCache SubrMapOffset .knownget {
		% We've already loaded some Subrs at this offset.
		% Make sure we've got as many as we need.
      dup length SubrCount lt {
		% We need to load more.
	SubrCount array exch 1 index copy length .readsubrs
	SubrCache SubrMapOffset 2 index put
      } if
    } {
		% We haven't loaded any Subrs at this offset yet.
      SubrCount array 0 .readsubrs
      SubrCache SubrMapOffset 2 index put
    } ifelse
    Subrs copy pop
  } if
} bind def

% ------ CIDFontType 1 (FontType 10) ------ %

dup 1 {
  10 .checkfonttype pop
  1 index exch .buildfont10 exch pop
} bind put

% ------ CIDFontType 2 (FontType 11) ------ %

dup 2 {
  11 .checkfonttype pop
  1 index exch .buildfont11 exch pop
} bind put

pop		% .cidfonttypes

% ---------------- Reading CIDFontType 0 files ---------------- %

/StartData {		% <(Binary)|(Hex)> <datalength> StartData -
			%   (currentdict is CID font dict)
		% If we're loading a resource file and the data format is
		% binary, we can just save a pointer to the data and load it
		% incrementally.
  mark {
		% Previous versions of this code made provisions for
		% reading hex-encoded data incrementally.  Since hex data
		% doesn't seem to be used in practice, we no longer bother.
    2 index (Binary) ne { stop } if
    currentfile .currentresourcefile ne { stop } if
		% Hack: the pdfwrite driver relies on finalization to write
		% out fonts.  However, the font may be finalized after the
		% resource file, in which case the resource file will be
		% closed.  So if the current output device is pdfwrite,
		% don't use incremental loading.
    currentdevice .devicename /pdfwrite eq { stop } if
    currentfile fileposition
  } .internalstopped {
		% File is not positionable, or uses hex data.
		% Load the data now.
    cleartomark exch (Hex) eq
      { { currentfile exch readhexstring pop } }
      { { currentfile exch readstring pop } }
    ifelse exch
		% Stack: readproc length
    dup 65400 le {
		% readstring with a 0-length string causes a rangecheck,
		% but a data length of 0 is allowed.
      string dup () ne { 1 index exec } if
    } {
      mark 3 1 roll {
		% Stack: mark str ... readproc length
	dup 0 eq { pop exit } if
	dup 65400 min dup string 3 index exec
		% Stack: mark str ... readproc length newstrlen newstr
	4 1 roll sub
      } loop
      counttomark 1 add 1 roll ]
    } ifelse
    /GlyphData exch def
		% If we were reading hex data, skip past the >.
    2 get { readhexstring } 0 get eq {
      currentfile 0 (>) .subfiledecode dup flushfile closefile
    } if
  } {
		% File is positionable and binary, just save a pointer.
		% Stack: (Binary) length -mark- pos
    /GlyphData 0 def
    exch pop 3 -1 roll pop exch
		% Stack: pos length
    /DataSource currentfile 2 index () .subfiledecode true .reusablestream def
    currentfile 3 1 roll add setfileposition
  } ifelse
  /SubrCache 10 dict def
  CIDFontName currentdict /CIDFont defineresource pop
  end			% CID font dict
  end			% resource category dict
} bind def

% Some Adobe fonts include the line
%   /Setup /cid_Setup load def
% This is apparently included only to prevent proper, conforming PostScript
% interpreters (as opposed to ATM or a special Adobe font loader) from
% loading the font, since Setup is not referenced anywhere else in the file.
/cid_Setup { } def

currentdict end

% ---------------- Rendering ---------------- %

% ------ Generic ------ %

% Read a string at a given offset in a "file" (binary file or
% GlyphData in RAM).
/ReadString {		% <pos> <string> ReadString <string>
  GlyphData 0 eq {
	% Read from the file.
    DataSource 3 -1 roll setfileposition
    DataSource exch readstring pop
  } {
	% Read from a string or an array of strings.
    GlyphData .stringsreadstring
  } ifelse
} bind def
/.stringsreadstring	% <pos> <string> <strings> .stringsreadstring
			%   <vmstring>
{ dup type /stringtype eq
   { 3 1 roll length getinterval
   }
   {  {		% Stack: pos string glyphdata
	dup 0 get length dup 4 index gt { exit } if
	4 -1 roll exch sub 3 1 roll
	dup length 1 sub 1 exch getinterval
      }
     loop
		% Stack: pos string glyphdata glyphdata[0]length
		% We know no request can span more than 2 strings.
     3 index 3 index length add 1 index le
      {		% Request fits in a single string: just return a substring.
	pop 0 get 3 1 roll length getinterval
      }
      {		% Request spans 2 strings.  Copy the first part.
	1 index 0 get 4 index 3 -1 roll 1 index sub getinterval
	2 index copy
		% Copy the second part.
		% Stack: pos str glyphdata str1
	length exch 1 get 0 3 index length
	3 index sub getinterval 2 index 3 1 roll putinterval
	exch pop
      }
     ifelse
   }
  ifelse
} bind def

% Interpret a byte string as a (big-endian) integer.
/.cvbsi			% <bytes> .cvbsi <int>
{ 0 exch { exch 8 bitshift add } forall
} bind def

% Read an integer from binary data.
/.readint		% <pos> <nbytes> .readint <int>
{ string ReadString .cvbsi
} bind def

% ------ CIDFontType 0 ------ %

/.readglyphdata {
  currentfont exch .type9mapcid
  FDArray exch get exch
} bind def

% BuildGlyph procedure for CIDFontType 0.
% The name %Type9BuildGlyph is known to the interpreter.
/.cid0buildstring 10 string def
(%Type9BuildGlyph) cvn {	% <cidfont> <cid> %Type9BuildGlyph -
  .currentglobal 3 1 roll 1 index gcheck .setglobal
  1 index begin
  dup .readglyphdata dup null eq {
		% Substitute CID 0. **** WRONG ****
    pop pop 0 .readglyphdata
  } if
		% Stack: cidfont cid subfont charstring
  dup null eq { pop pop pop pop } {	%**** WRONG ****
    4 -1 roll pop
    3 1 roll exch dup 4 -1 roll 0 0 moveto
    3 index /FontType get 2 eq { .type2execchar } { .type1execchar } ifelse
  } ifelse	%**** WRONG ****
  end
  .setglobal
} bind def

% ------ CIDFontType 2 ------ %

% BuildGlyph procedure for CIDFontType 2.
% The name %Type11BuildGlyph is known to the interpreter.
(%Type11BuildGlyph) cvn {	% <cidfont> <cid> %Type11BuildGlyph -
		% We must be prepared for out-of-range CIDs.
  2 copy { .type11mapcid } .internalstopped {
    pop /CharStrings get /.notdef get
  } if
			% Stack: cidfont cid glyphindex
  1 index exch .type42execchar
} bind def

% ---------------- Define resources ---------------- %

languagelevel exch 2 .setlanguagelevel

% Define the CIDInit ProcSet resource.
% The ProcSet dictionary is still on the stack.

% We might have loaded CMap support already.  However, Adobe's
% protected font downloader defines a CIDInit ProcSet that will be
% loaded from the filesystem later, so we must check specifically
% for the ProcSet being defined in VM.
/CIDInit /ProcSet 2 copy resourcestatus { pop 0 eq } { false } ifelse {
  pop pop findresource dup length 4 index length add dict .copydict
  4 -1 roll exch .copydict
} {
  3 -1 roll
} ifelse exch defineresource pop

% Define the CIDFont resource category.
% We break out .buildcidfont because it appears that at least for
% Type 32 (CIDFontType 4) fonts, the font can be registered in the Font
% category with only a CIDFontType and no FontType.
/.buildcidfont {		% <name> <fontdict> .buildcidfont
				%   <name> <cidfont>
  dup /CIDFontType get //.cidfonttypes exch get exec
} odef

/CIDFont /Generic /Category findresource dup length dict .copydict
dup /InstanceType /dicttype put
dup /DefineResource {
  .buildcidfont
  /Generic /Category findresource /DefineResource get exec
} put
% CIDFonts may be defined in CFF OpenType files.
% Check for this here.
/.loadcidfontresource {
  dup .ResourceFile {
    {.loadfont} .execasresource
  } {
    dup /undefinedresource signalerror
  } ifelse
} bind def
dup /.LoadResource {
  currentglobal {
    .loadcidfontresource
  } {
    true setglobal {.loadcidfontresource} stopped false setglobal {stop} if
  } ifelse
} bind put

/Category defineresource pop

% Add the new FontType resources.

9 1 11 { dup /FontType defineresource pop } for

% Add the new FMapType resource.

9 dup /FMapType defineresource pop

% Define the CIDMap resource category.
% These aren't documented, but it's clear what they are for:
% to give names to CIDMaps for CIDFontType 2 fonts.

/CIDMap /Generic /Category findresource dup length dict .copydict
dup /.CheckResource {
	% Allow a string, an array of strings, or (as of Adobe release 3011)
	% a dictionary.
  dup type dup dup /stringtype eq exch /dicttype eq or {
    pop true
  } {
    dup /arraytype eq exch /packedarraytype eq or {
      true exch { type /stringtype eq and } forall
    } {
      false
    } ifelse
  } ifelse
} bind put
/Category defineresource pop

.setlanguagelevel