123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259 |
- #include <u.h>
- #include <ureg.h>
- #include "../port/lib.h"
- #include "mem.h"
- #include "dat.h"
- #include "fns.h"
- /*
- * We have one page table per processor.
- *
- * Different processes are distinguished via the VSID field in
- * the segment registers. As flushing the entire page table is an
- * expensive operation, we implement an aging algorithm for
- * mmu pids, with a background kproc to purge stale pids en mass.
- *
- * This needs modifications to run on a multiprocessor.
- */
- static ulong ptabsize; /* number of bytes in page table */
- static ulong ptabmask; /* hash mask */
- /*
- * VSID is 24 bits. 3 are required to distinguish segments in user
- * space (kernel space only uses the BATs). pid 0 is reserved.
- * The top 2 bits of the pid are used as a `color' for the background
- * pid reclaimation algorithm.
- */
- enum {
- PIDBASE = 1,
- PIDBITS = 21,
- COLBITS = 2,
- PIDMAX = ((1<<PIDBITS)-1),
- COLMASK = ((1<<COLBITS)-1),
- };
- #define VSID(pid, i) (((pid)<<3)|i)
- #define PIDCOLOR(pid) ((pid)>>(PIDBITS-COLBITS))
- #define PTECOL(color) PTE0(1, VSID(((color)<<(PIDBITS-COLBITS)), 0), 0, 0)
- void
- mmuinit(void)
- {
- int lhash, mem, i;
- ulong memsize;
- memsize = conf.npage * BY2PG;
- if(ptabsize == 0) {
- /* heuristically size the hash table */
- lhash = 10;
- mem = (1<<23);
- while(mem < memsize) {
- lhash++;
- mem <<= 1;
- }
- ptabsize = (1<<(lhash+6));
- ptabmask = (1<<lhash)-1;
- }
- m->ptabbase = (ulong)xspanalloc(ptabsize, 0, ptabsize);
- /* set page table base address */
- putsdr1(PADDR(m->ptabbase) | (ptabmask>>10));
- m->mmupid = PIDBASE;
- m->sweepcolor = 0;
- m->trigcolor = COLMASK;
- for(i = 0; i < 16; i++)
- putsr(i<<28, 0);
- }
- static int
- work(void*)
- {
- return PIDCOLOR(m->mmupid) == m->trigcolor;
- }
- void
- mmusweep(void*)
- {
- Proc *p;
- int i, x, sweepcolor;
- ulong *ptab, *ptabend, ptecol;
- for(;;) {
- if(PIDCOLOR(m->mmupid) != m->trigcolor)
- sleep(&m->sweepr, work, nil);
- sweepcolor = m->sweepcolor;
- x = splhi();
- p = proctab(0);
- for(i = 0; i < conf.nproc; i++, p++)
- if(PIDCOLOR(p->mmupid) == sweepcolor)
- p->mmupid = 0;
- splx(x);
- ptab = (ulong*)m->ptabbase;
- ptabend = (ulong*)(m->ptabbase+ptabsize);
- ptecol = PTECOL(sweepcolor);
- while(ptab < ptabend) {
- if((*ptab & PTECOL(3)) == ptecol){
- *ptab = 0;
- }
- ptab += 2;
- }
- m->sweepcolor = (sweepcolor+1) & COLMASK;
- m->trigcolor = (m->trigcolor+1) & COLMASK;
- }
- }
- int
- newmmupid(void)
- {
- int pid, newcolor, i, x;
- Proc *p;
- pid = m->mmupid++;
- if(m->mmupid > PIDMAX){
- /* Used up all mmupids, start again from first. Flush the tlb
- * to delete any entries with old pids remaining, then reassign
- * all pids.
- */
- m->mmupid = PIDBASE;
- x = splhi();
- tlbflushall();
- p = proctab(0);
- for(i = 0; i < conf.nproc; i++, p++)
- p->mmupid = 0;
- splx(x);
- wakeup(&m->sweepr);
- }
- newcolor = PIDCOLOR(m->mmupid);
- if(newcolor != PIDCOLOR(pid)) {
- if(newcolor == m->sweepcolor) {
- /* desperation time. can't block here. punt to fault/putmmu */
- print("newmmupid: %uld: no free mmu pids\n", up->pid);
- if(m->mmupid == PIDBASE)
- m->mmupid = PIDMAX;
- else
- m->mmupid--;
- pid = 0;
- }
- else if(newcolor == m->trigcolor)
- wakeup(&m->sweepr);
- }
- up->mmupid = pid;
- return pid;
- }
- void
- flushmmu(void)
- {
- int x;
- x = splhi();
- up->newtlb = 1;
- mmuswitch(up);
- splx(x);
- }
- /*
- * called with splhi
- */
- void
- mmuswitch(Proc *p)
- {
- int i, mp;
- ulong r;
- if(p->kp) {
- for(i = 0; i < 8; i++)
- putsr(i<<28, 0);
- return;
- }
- if(p->newtlb) {
- p->mmupid = 0;
- p->newtlb = 0;
- }
- mp = p->mmupid;
- if(mp == 0)
- mp = newmmupid();
- for(i = 0; i < 8; i++){
- r = VSID(mp, i)|BIT(1)|BIT(2);
- putsr(i<<28, r);
- }
- }
- void
- mmurelease(Proc* p)
- {
- p->mmupid = 0;
- }
- void
- putmmu(ulong va, ulong pa, Page *pg)
- {
- int mp;
- char *ctl;
- ulong *p, *ep, *q, pteg;
- ulong vsid, hash;
- ulong ptehi, x;
- static ulong pva;
- /*
- * If mmupid is 0, mmuswitch/newmmupid was unable to assign us
- * a pid, hence we faulted. Keep calling sched() until the mmusweep
- * proc catches up, and we are able to get a pid.
- */
- while((mp = up->mmupid) == 0)
- sched();
- vsid = VSID(mp, va>>28);
- hash = (vsid ^ ((va>>12)&0xffff)) & ptabmask;
- ptehi = PTE0(1, vsid, 0, va);
- pteg = m->ptabbase + BY2PTEG*hash;
- p = (ulong*)pteg;
- ep = (ulong*)(pteg+BY2PTEG);
- q = nil;
- while(p < ep) {
- x = p[0];
- if(x == ptehi) {
- q = p;
- break;
- }
- if(q == nil && (x & BIT(0)) == 0)
- q = p;
- p += 2;
- }
- if(q == nil) {
- q = (ulong*)(pteg+m->slotgen);
- m->slotgen = (m->slotgen + BY2PTE) & (BY2PTEG-1);
- }
- if (q[0] != ptehi || q[1] != pa){
- tlbflush(va);
- m->tlbpurge++;
- }
- q[0] = ptehi;
- q[1] = pa;
- ctl = &pg->cachectl[m->machno];
- switch(*ctl) {
- case PG_NEWCOL:
- default:
- panic("putmmu: %d\n", *ctl);
- break;
- case PG_TXTFLUSH:
- dcflush((void*)pg->va, BY2PG);
- icflush((void*)pg->va, BY2PG);
- *ctl = PG_NOFLUSH;
- break;
- case PG_NOFLUSH:
- break;
- }
- }
|