RISCI_ATOM
/
harvey
mirror of https://github.com/Harvey-OS/harvey.git


			
				
					
						
						
							12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453245424552456245724582459246024612462246324642465246624672468246924702471247224732474247524762477247824792480248124822483248424852486248724882489249024912492249324942495249624972498249925002501250225032504250525062507250825092510251125122513251425152516251725182519252025212522252325242525252625272528252925302531253225332534253525362537253825392540254125422543254425452546254725482549255025512552255325542555255625572558255925602561256225632564256525662567256825692570257125722573257425752576257725782579258025812582258325842585258625872588258925902591259225932594259525962597259825992600260126022603260426052606260726082609261026112612261326142615261626172618261926202621262226232624262526262627262826292630263126322633263426352636263726382639264026412642264326442645264626472648264926502651265226532654265526562657265826592660266126622663266426652666266726682669267026712672267326742675267626772678267926802681268226832684268526862687268826892690269126922693269426952696269726982699270027012702270327042705270627072708270927102711271227132714271527162717271827192720272127222723272427252726272727282729273027312732273327342735273627372738273927402741274227432744274527462747274827492750275127522753275427552756275727582759276027612762276327642765276627672768276927702771277227732774277527762777277827792780278127822783278427852786278727882789279027912792279327942795279627972798279928002801280228032804280528062807280828092810281128122813281428152816281728182819282028212822282328242825282628272828282928302831283228332834283528362837283828392840284128422843284428452846284728482849285028512852285328542855285628572858285928602861286228632864286528662867286828692870287128722873287428752876287728782879288028812882288328842885288628872888288928902891289228932894289528962897289828992900290129022903290429052906290729082909291029112912291329142915291629172918291929202921292229232924292529262927
							<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>How to use Ghostscript</title>
<!-- $Id: Use.htm,v 1.33.2.3 2002/02/01 04:55:55 raph Exp $ -->
<!-- Originally: use.txt -->
<link rel="stylesheet" type="text/css" href="gs.css" title="Ghostscript Style">
</head>

<body>
<!-- [1.0 begin visible header] ============================================ -->

<!-- [1.1 begin headline] ================================================== -->

<h1>How to use Ghostscript</h1>

<!-- [1.1 end headline] ==================================================== -->

<!-- [1.2 begin table of contents] ========================================= -->

<h2>Table of contents</h2>

<blockquote><ul>
<li><a href="#Invoking">Invoking Ghostscript</a>
<ul>
<li><a href="#Help_command">Help at the command line: <b><tt>gs -h</tt></b></a>
</ul>
<li><a href="#Security">Security</a>
<li><a href="#Pipe_input">Input from a pipe</a>
<li><a href="#Output_device">Selecting an output device</a>
<ul>
<li><a href="#Printer_resolution">Printer resolution</a>
<li><a href="#File_output">Output to files</a>
<ul>
<li><a href="#One_page_per_file">One page per file</a>
<li><a href="#Pipe_output">Output to a pipe</a>
<li><a href="#Output_to_graphics">Output to graphics file formats</a>
<li><a href="#Bounding_box_output">Bounding box output</a>
</ul>
<li><a href="#Paper_size">Choosing paper size</a>
<li><a href="#Change_default_size">Changing the installed default paper size</a>
</ul>
<li><a href="#Finding_files">How Ghostscript finds files</a>
<ul>
<li><a href="#PS_resources">Finding PostScript Level 2 resources</a>
<li><a href="#Font_lookup">Font lookup</a>
<li><a href="#Temp_files">Temporary files</a>
</ul>
<li><a href="#Environment_variables">Summary of environment variables</a>
<li><a href="#PDF">Using Ghostscript with PDF files</a>
<ul>
<li><a href="#PDF_stdin">PDF files from standard input</a>
<li><a href="#PDF_switches">Switches for PDF files</a>
<li><a href="#PDF_problems">Problems interpreting a PDF file</a>
</ul>
<li><a href="#Platforms">Notes on specific platforms</a>
<ul>
<li><a href="#Unix">Unix</a>
<li><a href="#VMS">VMS</a>
<ul>
<li><a href="#VMS_X_Windows">Using X Windows on VMS</a>
</ul>
<li><a href="#MS_Windows">MS Windows</a>
<li><a href="#MS-DOS">MS-DOS</a>
<li><a href="#X_Windows">X Windows</a>
<ul>
<li><a href="#X_resources">X resources</a>
<li><a href="#X_server_bugs">Working around bugs in X servers</a>
<li><a href="#X_fonts">X fonts</a>
<li><a href="#GS_fonts_as_X_fonts">Using Ghostscript fonts on X displays</a>
<li><a href="#X_device_parameters">X device parameters</a>
</ul>
<li><a href="#SCO_Unix">SCO Unix</a>
</ul>
<li><a href="#Switches">Switches</a>
<ul>
<li><a href="#General_switches">General switches</a>
<ul>
<li><a href="#Input_control">Input control</a>
<li><a href="#File_searching">File searching</a>
<li><a href="#Parameters">Setting parameters</a>
<li><a href="#Quiet">Suppress messages</a>
</ul>
<li><a href="#Parameter_switches">Parameter switches (<b><tt>-d</tt></b> and <b><tt>-s</tt></b>)</a>
<ul>
<li><a href="#Rendering_parameters">Rendering parameters</a>
<li><a href="#Page_parameters">Page parameters</a>
<li><a href="#Font_related_parameters">Font-related parameters</a>
<li><a href="#Interaction_related_parameters">Interaction-related parameters</a>
<li><a href="#Output_selection_parameters">Device and output selection parameters</a>
<li><a href="#Other_parameters">Other parameters</a>
</ul>
</ul>
<li><a href="#Improving_performance">Improving performance</a>
<li><a href="#Debugging">Debugging</a>
<li><a href="#Known_paper_sizes">Appendix: Paper sizes known to Ghostscript</a>
<li><a href="#X_font_mappings">Appendix: X default font mappings</a>
<ul>
<li><a href="#Standard_X_server_fonts">Standard X servers</a>
<ul>
<li><a href="#X_regular_fonts">Regular fonts</a>
<li><a href="#X_symbol_fonts">Symbol fonts</a>
<li><a href="#X_dingbat_fonts">Dingbat fonts</a>
</ul>
<li><a href="#OpenWindows_fonts">Sun OpenWindows</a>
</ul>
</ul></blockquote>

<!-- [1.2 end table of contents] =========================================== -->

<!-- [1.3 begin hint] ====================================================== -->

<p>For other information, see the <a href="Readme.htm">Ghostscript
overview</a>, the new user's documentation on
<a href="New-user.htm#Previewers">previewers</a> and, if necessary, how to
<a href="Install.htm">install Ghostscript</a>.

<!-- [1.3 end hint] ======================================================== -->

<hr>

<!-- [1.0 end visible header] ============================================== -->

<!-- [2.0 begin contents] ================================================== -->

<h2><a name="Invoking"></a>Invoking Ghostscript</h2>

<p><a name="Command_line"></a> The command line to invoke Ghostscript is
essentially the same on all systems, although the name of the executable
program itself may differ among systems.  For instance, to invoke
Ghostscript on Unix:

<blockquote>
<b><tt>gs</tt></b> [switches] {filename 1} ... [switches] {filename <em>N</em>} ...
</blockquote>

<blockquote><table cellpadding=0 cellspacing=0>
<tr><th colspan=3 bgcolor="#CCCC00"><hr><font size="+1">Ghostscript's name on different systems</font><hr>
<tr>	<th align=left>System
	<td>&nbsp;&nbsp;
	<th align=left>Ghostscript's name
<tr>	<td colspan=3><hr>
<tr>	<td>Unix
	<td>&nbsp;<td><b><tt>gs</tt></b>
<tr>	<td>VMS
	<td>&nbsp;<td><b><tt>gs</tt></b>
<tr>	<td>DOS &amp; MS Windows 3
	<td>&nbsp;<td><b><tt>gs386</tt></b>
<tr>	<td>MS Windows 95/98
	<td>&nbsp;<td><b><tt>gswin32</tt></b>
<tr>	<td>MS Windows 95/98 command line
	<td>&nbsp;<td><b><tt>gswin32c</tt></b>
<tr>	<td>OS/2
	<td>&nbsp;<td><b><tt>gsos2</tt></b>
</table></blockquote>

<p>
Note, though, that on a system with a windowed graphical user interface,
it's common to use Ghostscript through a previewer, so you should read the
<a href="New-user.htm#Previewers">section about previewers</a> in the
documentation for new users.

<p>
Ghostscript is capable of interpreting PostScript, encapsulated PostScript
(EPS), DOS EPS (EPSF), and -- if the executable was built for it -- Adobe
Portable Document Format (PDF).  The interpreter reads and executes the
files in sequence, using the method described under
"<a href="#File_searching">File searching</a>" to find them.  After doing
this, it reads further lines of PostScript language commands from the
primary input stream, normally the keyboard, interpreting each line
separately.  To quit the interpreter, type "<b><tt>quit</tt></b>".  The
interpreter also quits gracefully if it encounters end-of-file or
control-C.

<p>
The interpreter recognizes many <a href="#Switches">switches</a>. A switch
may appear anywhere in the command line, and applies to all files named
after it on the line. Many of the switches include "<b><tt>=</tt></b>"
followed by a parameter.  (However, with the DOS executable
<b><tt>gs386.exe</tt></b> in the standard Ghostscript distribution, you
must use "<b><tt>#</tt></b>" rather than "<b><tt>=</tt></b>", because of a
strange design decision in the Watcom C/C++ run-time library used to build
it.)

<h3><a name="Help_command"></a>Help at the command line: <b><tt>gs -h</tt></b></h3>

<p>
You can get a brief help message by invoking Ghostscript with the
<b><tt>-h</tt></b> or <b><tt>-?</tt></b> switch, like this:

<blockquote><b><tt>
gs -h<br>
gs -?
</tt></b></blockquote>

<p>
(Of course, for "<b><tt>gs</tt></b>" use the right
<a href="#Command_line">command for your system</a>.)  The message shows
for this executable

<ul>
<li>its version
<li>the format of the command to invoke it
<li>a few of the most useful switches
<li>the formats it can interpret
<li>the devices for which it can produce output
<li>where it looks for font files
<li>where and how to send bug reports
</ul>

<h2><a name="Security"></a>Security</h2>

<p>
Ghostscript implements a full-featured programming language, with
access to the filesystem and the ability to control a diverse set of
devices. As such, there are potential security implications.

<p>
The first line of defense is to use the security mechanisms
provided by Ghostscript. If you're running arbitrary PostScript files
(for example, those sent through email or downloaded from the Web),
make sure to use the -dSAFER option. Otherwise, you are opening up
your entire filesystem to potentially malicious code.

<p>
By default, Ghostscript opens up read access to the entire
filesystem. In general, if you're just viewing or printing documents,
this does not pose a significant security risk. However, if there is
a chance that the output of Ghostscript can leak sensitive information,
also set the -DPARANOIDSAFER option. Note, however, that this option
is incompatible with some scripts and wrappers, including gv and
related viewer apps.

<p>
We plan to make -dSAFER the default in future versions of Ghostscript.
Since most people use Ghostscript to print and view documents, rather
than to run scripts written in the PostScript language, this will
provide additional safety with little hassle for most users.  If you
<em>are</em> using Ghostscript as a scripting language and need
unfettered access to the filesystem, use the -dNOSAFER flag to signal
explictly that you wish the PostScript code to have full access to the
file system. Currently, this flag has no effect, but it will insure
than your scripts execute as expected in future versions.

<p>
While we've tried to patch all known security problems, there is
no guarantee that we've caught them all. Ghostscript is a complex
application written in C. Buffer overflows and other exploits remain
a distinct possibility. Thus we recommend that, whenever possible,
Ghostscript should run in a secure "sandbox" environment, making
use of the security mechanisms of the underlying operating system.
In particular, we urge Linux distributors to invoke Ghostscript from
the print subsystem in a chroot'ed environment, and never as root.

<p>
We will continue to be vigilant regarding security issues. As
always, apply security updates promptly.

<h2><a name="Pipe_input"></a>Input from a pipe</h2>

<p>
As noted above, one normally specifies input with file names on the command
line.  However, one can also "pipe" input into Ghostscript by using the
special file name "<b><tt>-</tt></b>" or "<b><tt>-_</tt></b>", for instance

<blockquote>
{some program producing PS} <b><tt>| gs</tt></b> {...options...} <b><tt>-</tt></b>
<br>
{some program producing PS} <b><tt>| gs</tt></b> {...options...} <b><tt>-_</tt></b>
</blockquote>

<p>
These switches differ from a named file in two respects:

<ol>
<li>When Ghostscript finishes reading from the pipe, it quits rather than
going into interactive mode.  Because of this, these switches are
really only useful as the last argument on the command line.

<li>These switches can't be used to pipe PDF input to Ghostscript.
See "<a href="#PDF">Using Ghostscript with PDF files</a>" below.
</ol>

<p>

The difference between "<b><tt>-</tt></b>" and "<b><tt>-_</tt></b>" is that
"<b><tt>-</tt></b>" reads the input one character at a time, which is useful
for programs such as GSview that generate input for Ghostscript dynamically
and watch for some response, whereas "<b><tt>-_</tt></b>" reads the input in
blocks, which is more efficient for ordinary (batch) execution.

<h2><a name="Output_device"></a>Selecting an output device</h2>

<p>
Ghostscript may be built to handle multiple output devices, and it normally
opens and directs output to the first one built in.  Ghostscript's
<b><tt>gs&nbsp;-h</tt></b> <a href="#Help_command">help message</a> lists
the output devices known to the executable.  Once you invoke Ghostscript
you can also find out what devices are available by
"<b><tt>devicenames&nbsp;==</tt></b>" at its command prompt.

<p><a name="Source_code"></a>

A little more information about devices appears near the beginning of the
files <b><tt>devs.mak</tt></b> (for drivers that are considered "part of"
Ghostscript and are maintained by the maintainers of the main Ghostscript
code) and <b><tt>contrib.mak</tt></b> (for user-contributed drivers) used to
build Ghostscript.  (If you got Ghostscript under the Aladdin <a
href="Public.htm">Free Public License</a>, the person or place from which
you got it is also required to make the source code available to you; if you
got it under the GNU General Public License (GPL), see the GNU <a
href="http://www.gnu.org/copyleft/gpl.html">General Public License</a> for
more information.)

<p><a name="Device_output"></a>
To use device <em>xyz</em> as the initial output device, use the
command-line switch

<blockquote>
	<b><tt>-sDEVICE=</tt></b><em>xyz</em>
</blockquote>

<p>
Note that this switch must precede the name of the first input file, and
only its first use has any effect.  For example, for printer output in a
configuration that includes an Epson printer driver, instead of just
"<b><tt>gs&nbsp;myfile.ps</tt></b>" you might use

<blockquote>
	<b><tt>gs -sDEVICE=epson myfile.ps</tt></b>
</blockquote>

<p>
Alternatively, once you invoke Ghostscript and have its own command prompt
you can type

<blockquote><b><tt>
	(epson) selectdevice<br>
	(myfile.ps) run
</tt></b></blockquote>

<p>
All output then goes to the Epson printer instead of the display until you
do something to change devices.  You can switch devices at any time by
using the <b><tt>selectdevice</tt></b> procedure, for
instance like one of these:

<blockquote><b><tt>
	(vga) selectdevice<br>
	(epson) selectdevice
</tt></b></blockquote>

<p><a name="GS_DEVICE"></a>
A third possibility is to define an environment variable
<b><tt>GS_DEVICE</tt></b> with the name of your desired default device.
The order of precedence for these alternatives, highest to lowest, is:

<blockquote><table cellpadding=0 cellspacing=0>
<tr>	<td><b><tt>selectdevice</tt></b>
	<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
	<td>Highest precedence
<tr>	<td>(command line)
	<td>&nbsp;
	<td>&nbsp;
<tr>	<td><b><tt>GS_DEVICE</tt></b>
	<td>&nbsp;
	<td>&nbsp;
<tr>	<td>(first device built in)
	<td>&nbsp;
	<td>Default; lowest precedence
</table></blockquote>

<h3><a name="Printer_resolution"></a>Printer resolution</h3>

<p>
Some printers can print at several different resolutions, letting you
balance resolution against printing speed.  To select the resolution on
such a printer, use the <b><tt>-r</tt></b> switch:

<blockquote>
	<b><tt>gs -sDEVICE=</tt></b><em>printer</em><b><tt> -r</tt></b><em>XRES</em><b><tt>x</tt></b><em>YRES</em>
</blockquote>

<p>
For example, on Epson-compatible printers you have these choices:

<blockquote><table cellpadding=0 cellspacing=0>
<tr>	<td><b><tt>gs -sDEVICE=epson</tt></b>
	<td>&nbsp;&nbsp;
	<td><b><tt>-r60x72</tt></b>
	<td>&nbsp;&nbsp;
	<td>9-pin
	<td>&nbsp;&nbsp;
	<td>lowest resolution
	<td>&nbsp;&nbsp;
	<td>fastest
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td><b><tt>-r240x72</tt></b>
	<td>&nbsp;
	<td>&nbsp;
	<td>&nbsp;
	<td>highest
	<td>&nbsp;
	<td>slowest
<tr>	<td>&nbsp;
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td><b><tt>-r60x60</tt></b>
	<td>&nbsp;
	<td>24-pin
	<td>&nbsp;
	<td>lowest
	<td>&nbsp;
	<td>fastest
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td><b><tt>-r360x180</tt></b>
	<td>&nbsp;
	<td>&nbsp;
	<td>&nbsp;
	<td>highest
	<td>&nbsp;
	<td>slowest
</table></blockquote>

<h3><a name="File_output"></a>Output to files</h3>

<p>
If you select a printer as the output device, Ghostscript also allows you to
control where the device sends its output.  On DOS and MS Windows systems,
output normally goes directly to the printer (<b><tt>PRN</tt></b>); on Unix
or VMS systems normally to a temporary file for later printing.  To send the
output to a file, use the <b><tt>-sOutputFile=</tt></b> switch (for
compatibility with older versions of Ghostscript,
<b><tt>-sOUTPUTFILE=</tt></b> also works).  For instance, to direct all
output into the file <b><tt>ABC.xyz</tt></b>, use

<blockquote><b><tt>
gs -sOutputFile=ABC.xyz
</tt></b></blockquote>

<p>
The file name follows the PostScript convention that if a name begins with
<b><tt>%</tt></b>, the name must be in the form <b><tt>%</tt></b>filedevice
or <b><tt>%</tt></b>filedevice<b><tt>%</tt></b>file.  The legal values of
filedevice are system-dependent, but the following have consistent meanings
across systems:

<blockquote><table cellpadding=0 cellspacing=0>
<tr><th colspan=3 bgcolor="#CCCC00"><hr><font size="+1">"%{filedevice}%{file}" in <b><tt>-sOutputFile=</tt></b></font><hr>
<tr valign=bottom>
	<th align=left>filedevice
	<td>&nbsp;&nbsp;&nbsp;
	<th align=left>Meaning
<tr>	<td colspan=3><hr>
<tr valign=top>	<td><b><tt>%os%xyz</tt></b>
	<td>&nbsp;
	<td>An ordinary file named <b><tt>xyz</tt></b>
<tr valign=top>	<td><b><tt>%pipe%cmd</tt></b>
	<td>&nbsp;
	<td>(if supported) A pipe to an instance of the command <b><tt>cmd</tt></b>
<tr valign=top>	<td><b><tt>%stdout</tt></b>
	<td>&nbsp;
	<td>The standard output file
</table></blockquote>

<p>
Note that because of this, if you want to specify a file name that actually
begins with <b><tt>%</tt></b>, you must specify the <b><tt>%os%</tt></b>
filedevice explicitly: e.g., for output to a file named
<b><tt>%abc</tt></b>, you need to specify
<b><tt>-sOutputFile=%os%%abc</tt></b>.  Note also that on DOS and MS Windows
systems, the <b><tt>%</tt></b> character has a special meaning for the
command processor (shell), so you will have to double it, e.g., for a pipe
on MS Windows,

<blockquote><b><tt>
gs -sOutputFile=%%pipe%%cmd
</tt></b></blockquote>

<h4><a name="One_page_per_file"></a>One page per file</h4>

<p>
You can also tell Ghostscript to put each page of output in a separate
file.  To send output to a series of files each representing a single page,
use in the filename the <b><tt>printf</tt></b> format specifier
"<b><tt>%d</tt></b>" (or its extended form like "<b><tt>%02d</tt></b>");
for instance

<blockquote><table cellpadding=0 cellspacing=0>
<tr><th colspan=3 bgcolor="#CCCC00"><hr><font size="+1">"%{n}d" in <b><tt>-sOutputFile=</tt></b></font><hr>
<tr valign=bottom>
	<th align=left>Output specification
	<td>&nbsp;&nbsp;&nbsp;
	<th align=left>Produces the series of 1-page files
<tr>	<td colspan=3><hr>
<tr valign=top>	<td><b><tt>-sOutputFile=ABC%d.xyz</tt></b>
	<td>&nbsp;
	<td><b><tt>ABC1.xyz</tt></b> ... <b><tt>ABC10.xyz</tt></b> ...
<tr valign=top>	<td><b><tt>-sOutputFile=ABC%03d.xyz</tt></b>
	<td>&nbsp;
	<td><b><tt>ABC001.xyz</tt></b> ... <b><tt>ABC010.xyz</tt></b> ...
</table></blockquote>

<p>
As noted above, on DOS and MS Windows systems, you will have to double the
<b><tt>%</tt></b> character, e.g.,

<blockquote><b><tt>
gs -sOutputFile=ABC%%03d.xyz
</tt></b></blockquote>

<h4><a name="Pipe_output"></a>Output to a pipe</h4>

<p>
On Unix and (32-bit) MS Windows systems you can use this switch to send
output directly to a pipe.  For example, to pipe the output to
<b><tt>lpr</tt></b>, use the command

<blockquote><b><tt>
	gs -sOutputFile=\|lpr
</tt></b></blockquote>
or, as noted above,
<blockquote><b><tt>
	gs -sOutputFile=%pipe%lpr
</tt></b></blockquote>

<p>
(doubling the <b><tt>%</tt></b> characters on MS Windows systems, as noted
above.)  You can also send output to standard output for piping in the usual
way supported by the system:

<blockquote>
	<b><tt>gs -sOutputFile=- -q |</tt></b> ...
</blockquote>
or, as noted above,
<blockquote>
	<b><tt>gs -sOutputFile=%stdout -q |</tt></b> ...
</blockquote>

<p>
(again, doubling the <b><tt>%</tt></b> character on MS Windows systems.)
In this case you must also use the <a href="#Quiet"><b><tt>-q</tt></b>
switch</a> to prevent Ghostscript from writing messages to standard output
which become mixed with the intended output stream.

<h4><a name="Output_to_graphics"></a>Output to graphics file formats</h4>

<p>
File formats like PCX and PBM are also "devices".  When you select a file
format as the "device", you must also specify an output file, for instance

<blockquote><b><tt>
gs -sDEVICE=pcxmono -sOutputFile=xyz.pcx
</tt></b></blockquote>

<p>
Here, as with printable files, you can use "<b><tt>%d</tt></b>"
("<b><tt>%%d</tt></b>" on DOS and MS Windows) to specify <a
href="#One_page_per_file">one page per output file</a>.

<h4><a name="Bounding_box_output"></a>Bounding box output</h4>

<p>
There is a special <b><tt>bbox</tt></b> "device" that just prints the
bounding box of each page.  You select it in the usual way:

<blockquote><b><tt>
gs -dNOPAUSE -dBATCH -sDEVICE=bbox
</tt></b></blockquote>

<p>
It prints the output in a format like this:

<blockquote>
<pre><b><tt>%%BoundingBox: 14 37 570 719
%%HiResBoundingBox: 14.308066 37.547999 569.495061 718.319158
</tt></b></pre></blockquote>

<p>
Currently, it always prints the bounding box on <b><tt>stderr</tt></b>;
eventually, it should also recognize <b><tt>-sOutputFile=</tt></b>.

<p>
Note that this device, like other devices, has a resolution and a (maximum)
page size.  As for other devices, the product (resolution x page size) is
limited to approximately 500K pixels.  By default, the resolution is 4000
DPI and the maximum page size is approximately 125", or approximately 9000
default (1/72") user coordinate units.  If you need to measure larger pages
than this, you must reset <em>both</em> the resolution and the page size in
pixels, e.g.,

<blockquote><b><tt>
gs -dNOPAUSE -dBATCH -sDEVICE=bbox -r100 -g500000x500000
</tt></b></blockquote>

<h3><a name="Paper_size"></a>Choosing paper size</h3>

<p>
Ghostscript is distributed configured to use U.S. letter paper as its
default page size.  There are two ways to select other paper sizes from the
command line:

<ul>

<li>
If the desired paper size is listed in the section on <a
href="#Known_paper_sizes">paper sizes known to Ghostscript</a> below, you
can select it as the default paper size for a single invocation of
Ghostscript by using the <b><tt>-sPAPERSIZE=</tt></b> switch, for instance

<blockquote><b><tt>
-sPAPERSIZE=a4<br>
-sPAPERSIZE=legal
</tt></b></blockquote>

<li>
Otherwise, let <em>w</em> be the desired paper width and <em>h</em> be the
desired paper height, in 1/72" units.  You can set the page size using the
pair of switches

<blockquote>
<b><tt>-dDEVICEWIDTHPOINTS=</tt></b><em>w</em>
<b><tt>-dDEVICEHEIGHTPOINTS=</tt></b><em>h</em>
</blockquote>

</ul>

<p>
Individual documents can (and often do) specify a paper size, which takes
precedence over the default size.  To force a specific paper size and
ignore the paper size specified in the document, select a paper size as
just described, and also include the
<a href="#FIXEDMEDIA"><b><tt>-dFIXEDMEDIA</tt></b> switch</a> on the
command line.

<h3><a name="Change_default_size"></a>Changing the installed default paper size</h3>

<p>
You can change the installed default paper size in installing Ghostscript
or later, by editing the initialization file <b><tt>gs_init.ps</tt></b>.
Find the consecutive lines

<blockquote><b><tt>
%&nbsp;Optionally&nbsp;choose&nbsp;a&nbsp;default&nbsp;paper&nbsp;size&nbsp;other&nbsp;than&nbsp;U.S.&nbsp;letter.<br>
%&nbsp;(a4)
</tt></b></blockquote>

<p>
Then to make A4 the default paper size, uncomment the second line to change
this to

<blockquote><b><tt>
%&nbsp;Optionally&nbsp;choose&nbsp;a&nbsp;default&nbsp;paper&nbsp;size&nbsp;other&nbsp;than&nbsp;U.S.&nbsp;letter.<br>
(a4)
</tt></b></blockquote>

<p>
For <b><tt>a4</tt></b> you can substitute any
<a href="#Known_paper_sizes">paper size Ghostscript knows</a>.

<h2><a name="Finding_files"></a>How Ghostscript finds files</h2>

<p>
When looking for initialization files (<b><tt>gs_*.ps</tt></b>,
<b><tt>pdf_*.ps</tt></b>), font files, the <b><tt>Fontmap</tt></b> file,
and files named on the command line, Ghostscript first tests whether the
file name specifies an explicit directory.

<blockquote><table cellpadding=0 cellspacing=0>
<tr><th colspan=3 bgcolor="#CCCC00"><hr><font size="+1">Testing a file name for an explicit directory</font><hr>
<tr>	<th align=left>System
	<td>&nbsp;&nbsp;
	<th align=left>Does the name ...
<tr>	<td colspan=3><hr>
<tr>	<td valign=top>Unix
	<td>&nbsp;
	<td>Begin with <b><tt><u>/</u></tt></b>, <b><tt><u>./</u></tt></b> or <b><tt><u>../</u></tt></b> ?
<tr>	<td valign=top>DOS or MS Windows
	<td>&nbsp;
	<td>Have <b><tt><u>:</u></tt></b> as its second character, or
		begin with <b><tt><u>/</u></tt></b>, <b><tt><u>\</u></tt></b>,
		<b><tt><u>./</u></tt></b>, <b><tt><u>../</u></tt></b>, <b><tt><u>.\</u></tt></b>, or <b><tt><u>..\</u></tt></b> ?
<tr>	<td valign=top>VMS
	<td>&nbsp;
	<td>Contain a node, device, root, or directory specification?
</table></blockquote>

<p><a name="General_search_path"></a> If the test succeeds, the file name
specifies an explicit directory and Ghostscript tries to open the file
using the name given.  Otherwise it tries directories in this order:

<ol>
<li>The current directory (unless disabled by the
<a href="#P-_switch"><b><tt>-P-</tt></b> switch</a>);

<li>The directories specified by <a href="#I_switch"><b><tt>-I</tt></b>
switches</a> in the command line, if any;

<li>The directories specified by the <b><tt>GS_LIB</tt></b>
environment variable, if any;

<li>The directories specified by the
<b><tt>GS_LIB_DEFAULT</tt></b> macro (if any) in the makefile
when this executable was built.
</ol>

<p>
<b><tt>GS_LIB_DEFAULT</tt></b>,
<b><tt>GS_LIB</tt></b>, and the
<b><tt>-I</tt></b> parameter may specify either a single
directory or a list of directories separated by a character appropriate for
the operating system ("<b><tt>:</tt></b>" on Unix systems,
"<b><tt>,</tt></b>" on VMS systems, and
"<b><tt>;</tt></b>" on DOS systems).  We think that trying
the current directory first is a very bad idea -- it opens serious security
loopholes and can lead to very confusing errors if one has more than one
version of Ghostscript in one's environment -- but when we attempted to
change it, users insisted that we change it back.  You can disable looking
in the current directory first by using the
<a href="#P_switch"><b><tt>-P-</tt></b> switch</a>.

<p>
Note that Ghostscript does not use this file searching algorithm for the
<b><tt>run</tt></b> or <b><tt>file</tt></b>
operators: for these operators, it simply opens the file with the name
given.  To run a file using the searching algorithm, use
<b><tt>runlibfile</tt></b> instead of
<b><tt>run</tt></b>.

<h3><a name="PS_resources"></a>Finding PostScript Level 2 resources</h3>

<p>
Ghostscript uses a completely different rule for looking for files
containing PostScript Level 2 "resources": per the Adobe documentation, it
concatenates together

<ol>
<li>the value of the system parameter
<b><tt>GenericResourceDir</tt></b> (initially
<b><tt>/Resource/</tt></b>)

<li>the name of the resource category (for instance, <b><tt>ProcSet</tt></b>)

<li>the value of the system parameter
<b><tt>GenericResourcePathSep</tt></b> (initially
"<b><tt>/</tt></b>")

<li>the name of the resource instance (for instance, <b><tt>CIDInit</tt></b>)
</ol>

<p>
To look up fonts, after exhausting the search method described in <a href="#Font_lookup">the
next section</a>, it concatenates together

<ol>
<li>the value of the system parameter
<b><tt>FontResourceDir</tt></b> (initially
<b><tt>/Resource/Font/</tt></b>)

<li>the name of the resource font (for instance, <b><tt>Times-Roman</tt></b>)
</ol>

<p>
Note that even though the system parameters are named "somethingDir", they
are not just plain directory names: they have "<b><tt>/</tt></b>" on the
end, so that they can be concatenated with the category name or font name.

<h3><a name="Font_lookup"></a>Font lookup</h3>

<p>
Ghostscript has a slightly different way to find the file containing a font
with a given name.  This rule uses not only the search path defined by
<b><tt>-I</tt></b>, <b><tt>GS_LIB</tt></b>, and
<b><tt>GS_LIB_DEFAULT</tt></b> <a href="#General_search_path">as described
above</a>, but also the directory that is the value of the
<b><tt>FontResourceDir</tt></b> system parameter, and an additional list of
directories that is the value of the <b><tt>GS_FONTPATH</tt></b> environment
variable (or the value provided with the <b><tt>-sFONTPATH=</tt></b> switch,
if present).

<p>
At startup time, Ghostscript reads in the <b><tt>Fontmap</tt></b> files in
every directory on the search path (or in the list provided with the
<b><tt>-sFONTMAP=</tt></b> switch, if present): these files are catalogs of
fonts and the files that contain them.  (See <a href="Fonts.htm#Fontmap">the
documentation of fonts</a> for details.)  Then, when Ghostscript needs to
find a font that isn't already loaded into memory, it goes through a series
of steps.

<ul>

<li>
First, it looks up the font name in the combined Fontmaps.  If there is an
entry for the desired font name, and the file named in the entry can be
found in some directory on the general search path (defined by
<b><tt>-I</tt></b>, <b><tt>GS_LIB</tt></b>, and
<b><tt>GS_LIB_DEFAULT</tt></b>), and the file is loaded successfully, and
loading it defines a font of the desired name, that is the end of the
process.

<li>
If this process fails at any step, Ghostscript looks for a file whose name
is the concatenation of the value of the <b><tt>FontResourceDir</tt></b>
system parameter and the font name, with no extension.  If such a file
exists, can be loaded, and defines a font of the desired name, that again is
the end.  The value of <b><tt>FontResourceDir</tt></b> is normally the
string <b><tt>/Resource/Font/</tt></b>, but it can be changed with the
<b><tt>setsystemparams</tt></b> operator: see the PostScript Language
Reference Manual for details.

<li>
If that fails, Ghostscript then looks for a file on the general search path
whose name is the desired font name, with no extension.  If such a file
exists, can be loaded, and defines a font of the desired name, that again is
the end.

<li>
If that too fails, Ghostscript looks at the <b><tt>GS_FONTPATH</tt></b>
environment variable (or the value provided with the
<b><tt>-sFONTPATH=</tt></b> switch, if present), which is also a list of
directories.  It goes to the first directory on the list, looking for all
files that appear to contain PostScript fonts; it then adds all those files
and fonts to the combined Fontmaps, and starts over.

<li>
If scanning the first FONTPATH directory doesn't produce a file that
provides the desired font, it adds the next directory on the FONTPATH list,
and so on until either the font is defined successfully or the list is
exhausted.

<li>
Finally, if all else fails, it will try to find a substitute for the font
from among the standard 35 fonts.

</ul>

<blockquote><table cellpadding=0 cellspacing=0>
<tr><th colspan=3 bgcolor="#CCCC00"><hr><font size="+1">Differences between search path and font path</font><hr>
<tr>	<th>Search path
	<td>&nbsp;&nbsp;&nbsp;
	<th>Font path
<tr>	<td colspan=3><hr>
<tr>	<td><b><tt>-I</tt></b> switch
	<td>&nbsp;
	<td><b><tt>-sFONTPATH=</tt></b> switch
<tr>	<td>&nbsp;
<tr>	<td><b><tt>GS_LIB</tt></b> and <b><tt>GS_LIB_DEFAULT</tt></b>
	    environment variables
	<td>&nbsp;
	<td><b><tt>GS_FONTPATH</tt></b> environment variable
<tr>	<td>&nbsp;
<tr>	<td valign=top>Consulted first
	<td>&nbsp;
	<td valign=top>Consulted only if search path and
	<b><tt>FontResourceDir</tt></b> don't provide the file.
<tr>	<td>&nbsp;
<tr>	<td valign=top>Font-name-to-file-name mapping given in Fontmap
	    files; aliases are possible, and there need not be any relation
	    between the font name in the Fontmap and the
	    <b><tt>FontName</tt></b> in the file.
	<td>&nbsp; <td valign=top>Font-name-to-file-name mapping is
	    implicit -- the <b><tt>FontName</tt></b> in the file is
	    used. Aliases are not possible.
<tr>	<td>&nbsp;
<tr>	<td valign=top>Only fonts and files named in Fontmap are used.
	<td>&nbsp;
	<td valign=top>Every Type 1 font file in each directory is
	    available; if TrueType fonts are supported (the
	    <b><tt>ttfont.dev</tt></b> feature was included when the
	    executable was built), they are also available.
</table></blockquote>

<p>
If you are using one of the following types of computer, you may wish to
set the environment variable <b><tt>GS_FONTPATH</tt></b> to
the value indicated so that Ghostscript will automatically acquire all the
installed Type 1 (and, if supported, TrueType) fonts (but see below for
notes on systems marked with "*"):

<blockquote><table cellpadding=0 cellspacing=0>
<tr><th colspan=5 bgcolor="#CCCC00"><hr><font size="+1">Suggested <b><tt>GS_FONTPATH</tt></b> for different systems</font><hr>
<tr>	<td>&nbsp;
	<td>&nbsp;&nbsp;
	<th align=left>System type
	<td>&nbsp;&nbsp;
	<th valign=bottom align=left><b><tt>GS_FONTPATH</tt></b>
<tr>	<td colspan=5><hr>
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td valign=top>Digital Unix
	<td>&nbsp;
	<td><b><tt>/usr/lib/X11/fonts/Type1Adobe</tt></b>
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td valign=top>Ultrix
	<td>&nbsp;
	<td><b><tt>/usr/lib/DPS/outline/decwin</tt></b>
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td valign=top>HP-UX 9
	<td>&nbsp;
	<td><b><tt>/usr/lib/X11/fonts/type1.st/typefaces</tt></b>
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td valign=top>IBM AIX
	<td>&nbsp;
	<td><b><tt>/usr/lpp/DPS/fonts/outlines
		<br>/usr/lpp/X11/lib/X11/fonts/Type1
		<br>/usr/lpp/X11/lib/X11/fonts/Type1/DPS</tt></b>
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td valign=top>NeXT
	<td>&nbsp;
	<td><b><tt>/NextLibrary/Fonts/outline</tt></b>
<tr>	<td>*
	<td>&nbsp;
	<td valign=top>SGI IRIX
	<td>&nbsp;
	<td><b><tt>/usr/lib/DPS/outline/base
		<br>/usr/lib/X11/fonts/Type1</tt></b>
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td valign=top>SunOS 4.x<br>(NeWSprint only)
	<td>&nbsp;
	<td valign=top><b><tt>newsprint_2.5/SUNWsteNP/reloc/$BASEDIR/NeWSprint/<br>&nbsp;&nbsp;&nbsp;&nbsp;small_openwin/lib/fonts</tt></b>
<tr>	<td>**
	<td>&nbsp;
	<td valign=top>SunOS 4.x
	<td>&nbsp;
	<td><b><tt>/usr/openwin/lib/X11/fonts/Type1/outline</tt></b>
<tr>	<td>**
	<td>&nbsp;
	<td valign=top>Solaris 2.x
	<td>&nbsp;
	<td><b><tt>/usr/openwin/lib/X11/fonts/Type1/outline</tt></b>
<tr>	<td>&nbsp;
	<td>&nbsp;
	<td valign=top>VMS
	<td>&nbsp;
	<td><b><tt>SYS$COMMON:[SYSFONT.XDPS.OUTLINE]</tt></b>
</table>

<hr align=left width="25%">

<p>
<b>*</b> On SGI IRIX systems, you must use <b><tt>Fontmap.SGI</tt></b> in
place of <b><tt>Fontmap</tt></b> or <b><tt>Fontmap.GS</tt></b>, because
otherwise the entries in <b><tt>Fontmap</tt></b> will take precedence over
the fonts in the FONTPATH directories.

<p>
<b>**</b> On Solaris systems simply setting <b><tt>GS_FONTPATH</tt></b> or
using <b><tt>-sFONTPATH=</tt></b> may not work, because for some reason some
versions of Ghostscript can't seem to find any of the Type1 fonts in
<b><tt>/usr/openwin/lib/X11/fonts/Type1/outline</tt></b>. (It says: "15
files, 15 scanned, 0 new fonts". We think this problem has been fixed in
Ghostscript version 6.0, but we aren't sure because we've never been able to
reproduce it.)  See <b><tt>Fontmap.Sol</tt></b> instead.  Also, on Solaris
2.x it's probably not worth your while to add Sun's fonts to your font path
and Fontmap.  The fonts Sun distributes on Solaris 2.x in the directories

<blockquote><b><tt>
	/usr/openwin/lib/X11/fonts/Type1<br>
	/usr/openwin/lib/X11/fonts/Type1/outline
</tt></b></blockquote>

<p>
are already represented among the ones distributed as part of Ghostscript;
and on some test files, Sun's fonts have been shown to cause incorrect
displays with Ghostscript.

</blockquote>

<p>
These paths may not be exactly right for your installation; if the indicated
directory doesn't contain files whose names are familiar font names like
Courier and Helvetica, you may wish to ask your system administrator where
to find these fonts.

<p>
Adobe Acrobat comes with a set of fourteen Type 1 fonts, on Unix typically
in a directory called ...<b><tt>/Acrobat3/Fonts</tt></b>.  There is no
particular reason to use these instead of the corresponding fonts in the
Ghostscript distribution (which are of just as good quality), except to save
about a megabyte of disk space, but the installation documentation explains
how to do it <a href="Install.htm#Use_Acrobat_fonts_Unix">on Unix</a> and <a
href="Install.htm#Use_platform_fonts_DOS">on DOS</a> (where you can also use
Adobe Type Manager fonts).

<h3><a name="Temp_files"></a>Temporary files</h3>

<blockquote><table cellpadding=0 cellspacing=0>
<tr><th colspan=5 bgcolor="#CCCC00"><hr><font size="+1">Where Ghostscript puts temporary files</font><hr>
<tr valign=bottom>
	<th align=left>Platform
	<td>&nbsp;&nbsp;&nbsp;
	<th align=left>Filename
	<td>&nbsp;&nbsp;&nbsp;
	<th align=left>Location
<tr>	<td colspan=5><hr>
<tr valign=top>	<td>DOS and OpenVMS
	<td>&nbsp;
	<td><b><tt>_temp_</tt></b>XX.XXX
	<td>&nbsp;
	<td>Current directory
<tr valign=top>	<td>OS/2
	<td>&nbsp;
	<td><b><tt>gs</tt></b>XXXXXX
	<td>&nbsp;
	<td>Current directory
<tr valign=top>	<td>Unix
	<td>&nbsp;
	<td><b><tt>gs_</tt></b>XXXXX
	<td>&nbsp;
	<td><b><tt>/tmp</tt></b>
</table></blockquote>

<p>
You can change in which directory Ghostscript creates temporary files by
setting the <b><tt>TMPDIR</tt></b> or <b><tt>TEMP</tt></b> environment
variable to the name of the directory you want used.  Ghostscript currently
doesn't do a very good job of deleting temporary files if it exits because
of an error; you may have to delete them manually from time to time.

<dl>
<dt><b><tt>GS</tt></b>, <b><tt>GSC</tt></b> (MS Windows only)
<dd>Specify the names of the Ghostscript executables.  <b><tt>GS</tt></b>
brings up a new typein window and possibly a graphics window;
<b><tt>GSC</tt></b> uses the DOS console.  If these are not set,
<b><tt>GS</tt></b> defaults to <b><tt>gswin32</tt></b>, and
<b><tt>GSC</tt></b> defaults to <b><tt>gswin32c</tt></b>.
</dl>

<dl>
<dt><a href="#GS_DEVICE"><b><tt>GS_DEVICE</tt></b></a>
<dd>Defines the default output device.
</dl>

<dl>
<dt><a href="#Font_lookup"><b><tt>GS_FONTPATH</tt></b></a>
<dd>Specifies a list of directories to scan for fonts if a font requested
can't be found anywhere on the search path.
</dl>

<dl>
<dt><a href="#Finding_files"><b><tt>GS_LIB</tt></b></a>
<dd>Provides a search path for initialization files and fonts.
</dl>

<dl>
<dt><b><tt>GS_OPTIONS</tt></b>
<dd>Defines a list of command-line arguments to be processed before the
ones actually specified on the command line.  For example, setting
<b><tt>GS_DEVICE</tt></b> to XYZ is equivalent to setting
<b><tt>GS_OPTIONS</tt></b> to <b><tt>-sDEVICE=XYZ</tt></b>.  The contents
of <b><tt>GS_OPTIONS</tt></b> are not limited to switches; they may include
actual file names or even <a href="#Input_control">"@file" arguments</a>.

</dl>

<dl>
<dt><a href="#Temp_files"><b><tt>TEMP</tt></b>, <b><tt>TMPDIR</tt></b></a>
<dd>Defines a directory name for temporary files.  If both
<b><tt>TEMP</tt></b> and <b><tt>TMPDIR</tt></b> are defined,
<b><tt>TMPDIR</tt></b> takes precedence.
</dl>

<hr>

<h2><a name="PDF"></a>Using Ghostscript with PDF files</h2>

<p>
Ghostscript is normally built (except on 16-bit DOS platforms) to interpret
both PostScript and PDF files, examining each file to determine
automatically whether its contents are PDF or PostScript.  All the normal
switches and procedures for interpreting PostScript files also apply to PDF
files, with a few exceptions.  In addition, the
<b><tt>pdf2ps</tt></b> utility uses Ghostscript to convert
PDF to (Level 2) PostScript.

<h3><a name="PDF_stdin"></a>PDF files from standard input</h3>

<p>

Using the <a href="#Pipe_input">"<b><tt>-</tt></b>" or "<b><tt>-_</tt></b>"
switch</a> you can provide PDF input from a file, but not from a pipe,
because the PDF language, unlike the PostScript language, inherently
requires random access to the file, while a pipe is always sequential.  That
is,

<blockquote><table cellpadding=0 cellspacing=0>
<tr>	<td><b><tt>gs -_ &lt; somefile.pdf</tt></b>
	<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
	<td>(<b><em>is</em></b> permissible)
<tr>	<td>{some program producing PDF} <b><tt>| gs -_</tt></b>
	<td>&nbsp;
	<td>(is <b><em>not</em></b> permissible)
</table></blockquote>

<h3><a name="PDF_switches"></a>Switches for PDF files</h3>

<dl>
<dt><b><tt>-dFirstPage=</tt></b><em>pagenumber</em>
<dd>Begins interpreting on the designated page of the document.
</dl>

<dl>
<dt><b><tt>-dLastPage=</tt></b><em>pagenumber</em>
<dd>Stops interpreting after the designated page of the document.
</dl>

<dl>
<dt><b><tt>-dPrinted</tt></b>
<dt><b><tt>-dPrinted=false</tt></b>
<dd>Determines whether the file should be displayed or printed using the
"screen" or "printer" options for annotations and images.  With
<b><tt>-dPrinted</tt></b>, the output will use the file's "print"
options; with <b><tt>-dPrinted=false</tt></b>, the output will use the
file's "screen" options.  If neither of these is specified, the output will
use the screen options for any output device that doesn't have an
<b><tt>OutputFile</tt></b> parameter, and the printer options for
devices that do have this parameter.
</dl>

<dl>
<dt><b><tt>-sPDFPassword=</tt></b><em>password</em>
<dd>Sets the user or owner password to be used in decoding encrypted
PDF files.
</dl>

<h3><a name="PDF_problems"></a>Problems interpreting a PDF file</h3>

<p>
Occasionally you may try to read or print a <b><tt>*.pdf</tt></b> file that
Ghostscript doesn't recognize as PDF, even though the same file
<b><em>can</em></b> be opened and interpreted by an Adobe Acrobat viewer.
This can happen when, for instance, a PDF file produced on a Macintosh is
carelessly moved to another kind of system, leaving now-useless
Macintosh-specific data before the standard header.  Ghostscript can't read
these files because they don't conform to the PDF standard, Adobe's <a
href="http://partners.adobe.com/asn/developer/acrosdk/docs/PDFRef.pdf"
class="offsite"><cite>Portable
Document Format Reference Manual</cite></a>, version 1.2, which states:

<blockquote>
The first line of a PDF file specifies the version number of the PDF
specification to which the file adheres....  [T]he first line of a
1.2-conforming PDF file should be <b><tt>%PDF-1.2</tt></b>.
</blockquote>

<p>
However, in an appendix the manual also says that Adobe

<blockquote>
Acrobat viewers are very liberal in their check for a valid PDF header.
All viewers allow the header to appear anywhere in the first 1,000 bytes of
the file.
</blockquote>

<p>
Ghostscript doesn't do this: it expects PDF files to conform to the
standard, because that's how it recognizes them among other formats it
handles, unlike Acrobat viewers which need deal only with PDF and can
therefore afford to be more liberal with PDF.  So if you encounter a file
with useless characters before the header and you want to use it with
Ghostscript, you can fix it by stripping the extra characters from before
the standard header.  The file should begin with exactly the characters

<blockquote><b><tt>
%PDF
</tt></b></blockquote>

<p>
PDF files are binary, not text, so be careful to edit the file as a binary,
not as text.  On Unix, after determining the length of the useless prefix
string, which you can do with <b><tt>od</tt></b>, you can use
<b><tt>tail</tt></b> to strip them off.  For instance:

<blockquote>
<b><tt>od -c Macintosh.pdf | more</tt></b> ;# <em>shows that <b><tt>%PDF</tt></b> occurs after 128 characters</em><br>
<b><tt>tail +128c Macintosh.pdf &gt;Legal.pdf</tt></b>
</blockquote>

<p>
On PCs and other systems you can use the <b><tt>hexl</tt></b> program
distributed with GNU emacs to convert the PDF file to editable text form.
After editing, <b><tt>hexl</tt></b> can convert the text form back to
binary.

<hr>

<h2><a name="Platforms"></a>Notes on specific platforms</h2>

<h3><a name="Unix"></a>Unix</h3>

<p>
The Ghostscript distribution includes some Unix shell scripts to use with
Ghostscript in different environments.  These are all user-contributed
code, so if you have questions, please contact the user identified in the
file, not Aladdin Enterprises or artofcode LLC.

<dl>
<dt><b><tt>pv.sh</tt></b>
<dd>Preview a specified page of a <b><tt>dvi</tt></b> file in an X window
</dl>

<dl>
<dt><b><tt>sysvlp.sh</tt></b>
<dd>System V 3.2 lp interface for parallel printer
</dl>

<dl>
<dt><b><tt>pj-gs.sh</tt></b>
<dd>Printing on an H-P PaintJet under HP-UX
</dl>

<dl>
<dt><b><tt>unix-lpr.sh</tt></b>
<dd>Queue filter for <b><tt>lpr</tt></b> under Unix;
<a href="Unix-lpr.htm">its documentation</a> is intended for system
administrators
</dl>

<dl>
<dt><b><tt>lprsetup.sh</tt></b>
<dd>Setup for <b><tt>unix-lpr.sh</tt></b>
</dl>

<hr>

<h3><a name="VMS"></a>VMS</h3>

<ul>
<li>To be able to specify switches and file names when invoking the
interpreter, define <b><tt>gs</tt></b> as a foreign command:

<blockquote>
<b><tt>$ gs == "$</tt></b><em>disk</em><b><tt>:[</tt></b><em>directory</em><b><tt>]gs.exe</tt></b>"
</blockquote>

<p>
where the "<em>disk</em>" and "<em>directory</em>" specify where
the Ghostscript executable is located.  For instance,

<blockquote><b><tt>
$ gs == "$dua1:[ghostscript]gs.exe"
</tt></b></blockquote>

<li>On VMS systems, the last character of each "directory" name indicates
what sort of entity the "directory" refers to.  If the "directory" name
ends with a colon "<b><tt>:</tt></b>", it is taken to refer to a logical
device, for instance

<blockquote><b><tt>
$ define ghostscript_device dua1:[ghostscript_510]<br>
$ define gs_lib ghostscript_device:
</tt></b></blockquote>

<p>
If the "directory" name ends with a closing square bracket
"<b><tt>]</tt></b>", it is taken to refer to a real directory, for instance

<blockquote><b><tt>
$ define gs_lib dua1:[ghostscript]
</tt></b></blockquote>

<li>Defining the logical <b><tt>GS_LIB</tt></b>

<blockquote>
<b><tt>$ define gs_lib</tt></b> <em>disk</em><b><tt>:[</tt></b><em>directory</em><b><tt>]</tt></b>
</blockquote>

<p>
allows Ghostscript to find its initialization files in the Ghostscript
directory even if that's not where the executable resides.<br>&nbsp;

<li>Although VMS DCL itself converts unquoted parameters to upper case, C
programs such as Ghostscript receive their parameters through the C runtime
library, which forces all unquoted command-line parameters to lower case.
That is, with the command

<blockquote><b><tt>
$ gs -Isys$login:
</tt></b></blockquote>

<p>
Ghostscript sees the switch as <b><tt>-isys$login</tt></b>,
which doesn't work.  To preserve the case of switches, quote them like
this:

<blockquote><b><tt>
$ gs "-Isys$login:"
</tt></b></blockquote>

<li>If you write printer output to a file with
<b><tt>-sOutputFile=</tt></b> and then want to print the file later, use
"<b><tt>PRINT/PASSALL</tt></b>".
</ul>

<ul>
<li>PDF files (or PostScript files that use the
<b><tt>setfileposition</tt></b> operator) must be "stream LF" type files to
work properly on VMS systems. (<b><em>Note:</em></b> This definitely matters
if Ghostscript was compiled with DEC C; we are not sure of the situation if
you use <b><tt>gcc</tt></b>.)  Because of this, if you transfer files by
FTP, you probably need to do one of these two things after the transfer:

<ol>
<li>If the FTP transfer was in text (ASCII) mode:

<blockquote>
<b><tt>$ convert/fdl=streamlf.fdl</tt></b> input-file output-file
</blockquote>

<p>
where the contents of the file <b><tt>STREAMLF.FDL</tt></b> are

<blockquote>
<pre>FILE
        ORGANIZATION            sequential

RECORD
        BLOCK_SPAN              yes
        CARRIAGE_CONTROL        carriage_return
        FORMAT                  stream_lf
</pre></blockquote>

<li>If the FTP transfer was in binary mode:

<blockquote><b><tt>
     $ set file/attribute=(rfm:stmlf)
</tt></b></blockquote>
</ol>
</ul>

<h4><a name="VMS_X_Windows"></a>Using X Windows on VMS</h4>

<p>
If you are using on an X Windows display, you can set it up with the node
name and network transport, for instance

<blockquote><b><tt>
	$ set display/create/node="doof.city.com"/transport=tcpip
</tt></b></blockquote>

<p>
and then run Ghostscript by typing <b><tt>gs</tt></b> at the command line.

<hr>

<h3><a name="MS_Windows"></a>MS Windows</h3>

<p>
You must add <em>gs\</em><b><tt>bin</tt></b> and
<em>gs\</em><b><tt>lib</tt></b> to the <b><tt>PATH</tt></b>, where
<em>gs</em> is the top-level Ghostscript directory.

<hr>

<h3><a name="MS-DOS"></a>MS-DOS</h3>

<p>
You must add <em>gs\</em><b><tt>bin</tt></b> and
<em>gs\</em><b><tt>lib</tt></b> to the <b><tt>PATH</tt></b>, where
<em>gs</em> is the top-level Ghostscript directory.

<ul>
<li>
Ghostscript supports many SuperVGA displays directly, most of them with
more than 16 colors.  The complete list is in the file
<b><tt>devs.mak</tt></b>, part of Ghostscript's
<a href="#Source_code">source code</a>.

<li>
Some applications, such as Microsoft Word, require a prologue in front of
the PostScript files they produce.  In the case of MS Word, this prologue
is one of the *.ini files Microsoft includes with Word.  Other applications
may require other prologues.  You may specify a prologue on the Ghostscript
command line, for instance

<blockquote><b><tt>
	gs386 prologue.ini myfile.ps
</tt></b></blockquote>

<li>
If you have a SuperVGA display that supports a 16-color mode with 800x600
pixels and you know the display mode number for this mode, you can select
it by using the command line switches

<blockquote>
<b><tt>-sDEVICE=svga16 -dDisplayMode=</tt></b><em>NNN</em>
</blockquote>

<p>
where <em>NNN</em> is the display mode number in decimal.  Here are modes
for some popular display chipsets; the ones that use the default value are
marked "*".  If your card's chipset doesn't appear on this list, or if you
try the value here and it doesn't work, please send the name of the chipset
and its correct display mode to &lt;<a href="mailto:bug-gs@aladdin.com">bug-gs@aladdin.com</a>&gt; to include in
future releases.

<blockquote><table cellpadding=0 cellspacing=0>
<tr><th colspan=6 bgcolor="#CCCC00"><hr><font size="+1">Display modes for PC display chipsets</font><hr>
<tr>	<td>&nbsp;
	<th>Chipset
	<td>&nbsp;
	<th>Decimal
	<td>&nbsp;
	<th>Hex
<tr>	<td colspan=6><hr>
<tr>	<td>&nbsp;
	<td>Acumos AVGA2, AVGA3
	<td>&nbsp;
	<td align=center>88
	<td>&nbsp;
	<td align=right><tt>0x58</tt>
<tr>	<td>&nbsp;
	<td>Advance Logic AL2101
	<td>&nbsp;
	<td align=center>43
	<td>&nbsp;
	<td align=right><tt>0x2B</tt>
<tr>	<td>&nbsp;
	<td>Ahead V5000
	<td>&nbsp;
	<td align=center>113
	<td>&nbsp;
	<td align=right><tt>0x71</tt>
<tr>	<td>&nbsp;
	<td>ATI VGAWONDER, Graphics Ultra etc.
	<td>&nbsp;
	<td align=center>84
	<td>&nbsp;
	<td align=right><tt>0x54</tt>
<tr>	<td>&nbsp;
	<td>Chips and Technologies
	<td>&nbsp;
	<td align=center>106
	<td>&nbsp;
	<td align=right><tt>0x6A</tt>
<tr>	<td>&nbsp;
	<td>Cirrus Logic CL-GD 500/600
	<td>&nbsp;
	<td align=center>100
	<td>&nbsp;
	<td align=right><tt>0x64</tt>
<tr>	<td>&nbsp;
	<td>Cirrus Logic GD 5422
	<td>&nbsp;
	<td align=center>88
	<td>&nbsp;
	<td align=right><tt>0x58</tt>
<tr>	<td>&nbsp;
	<td>Compaq VGA
	<td>&nbsp;
	<td align=center>89
	<td>&nbsp;
	<td align=right><tt>0x59</tt>
<tr>	<td>&nbsp;
	<td>CTI
	<td>&nbsp;
	<td align=center>106
	<td>&nbsp;
	<td align=right><tt>0x6A</tt>
<tr>	<td>*
	<td>Genoa 5xxx, Sigma VGA
	<td>&nbsp;
	<td align=center>41
	<td>&nbsp;
	<td align=right><tt>0x29</tt>
<tr>	<td>&nbsp;
	<td>Genoa 6xxx
	<td>&nbsp;
	<td align=center>106
	<td>&nbsp;
	<td align=right><tt>0x6A</tt>
<tr>	<td>&nbsp;
	<td>MXIC MX 68010
	<td>&nbsp;
	<td align=center>85
	<td>&nbsp;
	<td align=right><tt>0x55</tt>
<tr>	<td>&nbsp;
	<td>NCR 77C22
	<td>&nbsp;
	<td align=center>88
	<td>&nbsp;
	<td align=right><tt>0x58</tt>
<tr>	<td>&nbsp;
	<td>OAK Technologies OTI-067, OTI-077, OTI037C
	<td>&nbsp;
	<td align=center>82
	<td>&nbsp;
	<td align=right><tt>0x52</tt>
<tr>	<td>&nbsp;
	<td>OAK Technologies OTI037C w/ NEL BIOS
	<td>&nbsp;
	<td align=center>91
	<td>&nbsp;
	<td align=right><tt>0x5B</tt>
<tr>	<td>*
	<td>Orchid Prodesigner
	<td>&nbsp;
	<td align=center>41
	<td>&nbsp;
	<td align=right><tt>0x29</tt>
<tr>	<td>&nbsp;
	<td>Paradise
	<td>&nbsp;
	<td align=center>88
	<td>&nbsp;
	<td align=right><tt>0x58</tt>
<tr>	<td>&nbsp;
	<td>Poach
	<td>&nbsp;
	<td align=center>106
	<td>&nbsp;
	<td align=right><tt>0x6A</tt>
<tr>	<td>&nbsp;
	<td>Primus
	<td>&nbsp;
	<td align=center>42
	<td>&nbsp;
	<td align=right><tt>0x2A</tt>
<tr>	<td>&nbsp;
	<td>Realtek RT 3106
	<td>&nbsp;
	<td align=center>31
	<td>&nbsp;
	<td align=right><tt>0x1F</tt>
<tr>	<td>&nbsp;
	<td>Tecmar
	<td>&nbsp;
	<td align=center>22
	<td>&nbsp;
	<td align=right><tt>0x16</tt>
<tr>	<td>&nbsp;
	<td>Trident 8900
	<td>&nbsp;
	<td align=center>91
	<td>&nbsp;
	<td align=right><tt>0x5B</tt>
<tr>	<td>*
	<td>Tseng ET-3000, ET-4000
	<td>&nbsp;
	<td align=center>41
	<td>&nbsp;
	<td align=right><tt>0x29</tt>
<tr>	<td>*
	<td>VEGA
	<td>&nbsp;
	<td align=center>41
	<td>&nbsp;
	<td align=right><tt>0x29</tt>
<tr>	<td>&nbsp;
	<td>Video 7 SVGA
	<td>&nbsp;
	<td align=center>98
	<td>&nbsp;
	<td align=right><tt>0x62</tt>
<tr>	<td>&nbsp;
	<td>WD90C11
	<td>&nbsp;
	<td align=center>92
	<td>&nbsp;
	<td align=right><tt>0x5C</tt>
<tr>	<td>&nbsp;
	<td>Western Digital
	<td>&nbsp;
	<td align=center>88
	<td>&nbsp;
	<td align=right><tt>0x58</tt>
</table></blockquote>
</ul>

<hr>

<h3><a name="X_Windows"></a>X Windows</h3>

<p>
Ghostscript looks for the following resources under the program name
<b><tt>ghostscript</tt></b> and class name
<b><tt>Ghostscript</tt></b>; the ones marked "**" are
calculated from display metrics:

<blockquote><table cellpadding=0 cellspacing=0>
<tr><th colspan=5 bgcolor="#CCCC00"><hr><font size="+1">X Windows resources</font><hr>
<tr>	<th align=left>Name
	<td>&nbsp;&nbsp;
	<th align=left>Class
	<td>&nbsp;&nbsp;
	<th align=left>Default
<tr>	<td colspan=5><hr>
<tr>	<td><b><tt>background</tt></b>
	<td>&nbsp;
	<td><b><tt>Background</tt></b>
	<td>&nbsp;
	<td><b><tt>white</tt></b>
<tr>	<td><b><tt>foreground</tt></b>
	<td>&nbsp;
	<td><b><tt>Foreground</tt></b>
	<td>&nbsp;
	<td><b><tt>black</tt></b>
<tr>	<td><b><tt>borderColor</tt></b>
	<td>&nbsp;
	<td><b><tt>BorderColor</tt></b>
	<td>&nbsp;
	<td><b><tt>black</tt></b>
<tr>	<td><b><tt>borderWidth</tt></b>
	<td>&nbsp;
	<td><b><tt>BorderWidth</tt></b>
	<td>&nbsp;
	<td><b><tt>1</tt></b>
<tr>	<td><b><tt>geometry</tt></b>
	<td>&nbsp;
	<td><b><tt>Geometry</tt></b>
	<td>&nbsp;
	<td><b><tt>NULL</tt></b>
<tr>	<td><b><tt>xResolution</tt></b>
	<td>&nbsp;
	<td><b><tt>Resolution</tt></b>
	<td>&nbsp;
	<td>**
<tr>	<td><b><tt>yResolution</tt></b>
	<td>&nbsp;
	<td><b><tt>Resolution</tt></b>
	<td>&nbsp;
	<td>**
<tr>	<td><b><tt>useExternalFonts</tt></b>
	<td>&nbsp;
	<td><b><tt>UseExternalFonts</tt></b>
	<td>&nbsp;
	<td><b><tt>true</tt></b>
<tr>	<td><b><tt>useScalableFonts</tt></b>
	<td>&nbsp;
	<td><b><tt>UseScalableFonts</tt></b>
	<td>&nbsp;
	<td><b><tt>true</tt></b>
<tr>	<td><b><tt>logExternalFonts</tt></b>
	<td>&nbsp;
	<td><b><tt>LogExternalFonts</tt></b>
	<td>&nbsp;
	<td><b><tt>false</tt></b>
<tr>	<td><b><tt>externalFontTolerance</tt></b>
	<td>&nbsp;
	<td><b><tt>ExternalFontTolerance</tt></b>
	<td>&nbsp;
	<td><b><tt>10.0</tt></b>
<tr>	<td><b><tt>palette</tt></b>
	<td>&nbsp;
	<td><b><tt>Palette</tt></b>
	<td>&nbsp;
	<td><b><tt>Color</tt></b>
<tr>	<td><b><tt>maxGrayRamp</tt></b>
	<td>&nbsp;
	<td><b><tt>MaxGrayRamp</tt></b>
	<td>&nbsp;
	<td><b><tt>128</tt></b>
<tr>	<td><b><tt>maxRGBRamp</tt></b>
	<td>&nbsp;
	<td><b><tt>MaxRGBRamp</tt></b>
	<td>&nbsp;
	<td><b><tt>5</tt></b>
<tr>	<td><b><tt>maxDynamicColors</tt></b>
	<td>&nbsp;
	<td><b><tt>MaxDynamicColors</tt></b>
	<td>&nbsp;
	<td><b><tt>256</tt></b>
<tr>	<td><b><tt>useBackingPixmap</tt></b>
	<td>&nbsp;
	<td><b><tt>UseBackingPixmap</tt></b>
	<td>&nbsp;
	<td><b><tt>true</tt></b>
<tr>	<td><b><tt>useXPutImage</tt></b>
	<td>&nbsp;
	<td><b><tt>UseXPutImage</tt></b>
	<td>&nbsp;
	<td><b><tt>true</tt></b>
<tr>	<td><b><tt>useXSetTile</tt></b>
	<td>&nbsp;
	<td><b><tt>UseXSetTile</tt></b>
	<td>&nbsp;
	<td><b><tt>true</tt></b>
<tr>	<td><b><tt>regularFonts</tt></b>
	<td>&nbsp;
	<td><b><tt>RegularFonts</tt></b>
	<td>&nbsp;
	<td>See "<a href="#X_fonts">X fonts</a>"
<tr>	<td><b><tt>symbolFonts</tt></b>
	<td>&nbsp;
	<td><b><tt>SymbolFonts</tt></b>
	<td>&nbsp;
	<td>See "<a href="#X_fonts">X fonts</a>"
<tr>	<td><b><tt>dingbatFonts</tt></b>
	<td>&nbsp;
	<td><b><tt>DingbatFonts</tt></b>
	<td>&nbsp;
	<td>See "<a href="#X_fonts">X fonts</a>"
</table></blockquote>

<h4><a name="X_resources"></a>X resources</h4>

<ul>
<li>
To set X resources, put them in a file (such as
<b><tt>~/.Xdefaults</tt></b> on Unix) in a form like this:

<blockquote><table cellpadding=0 cellspacing=0>
<tr><td><b><tt>Ghostscript*geometry:</tt></b><td><b><tt>&nbsp;&nbsp;</tt></b><td><b><tt>595x842-0+0</tt></b>
<tr><td><b><tt>Ghostscript*xResolution:</tt></b><td><b><tt>&nbsp;</tt></b><td><b><tt>72</tt></b>
<tr><td><b><tt>Ghostscript*yResolution:</tt></b><td><b><tt>&nbsp;</tt></b><td><b><tt>72</tt></b>
</table></blockquote>

<p>
Then merge these resources into the X server's resource database:

<blockquote><b><tt>
	xrdb -merge ~/.Xdefaults
</tt></b></blockquote>

<li>
Ghostscript doesn't look at the default system background and foreground
colors; if you want to change the background or foreground color, you must
set them explicitly for Ghostscript.  This is a deliberate choice, so that
PostScript documents will display correctly by default -- with white as
white and black as black -- even if text windows use other colors.

<li>
The <b><tt>geometry</tt></b> resource affects only window placement.

<li>
Resolution is expressed in pixels per inch (1 inch = 2.54cm).

<li>
The font tolerance gives the largest acceptable difference in height of the
screen font, expressed as a percentage of the height of the desired font.

<li>
The <b><tt>palette</tt></b> resource can be used to restrict Ghostscript to
using a grayscale or monochrome palette.

<li>
<b><tt>maxRGBRamp</tt></b> and
<b><tt>maxGrayRamp</tt></b> control the maximum number of
colors that ghostscript allocates ahead of time for the dither cube (ramp).
Ghostscript never preallocates more than half the cells in a colormap.
<b><tt>maxDynamicColors</tt></b> controls the maximum
number of colors that Ghostscript will allocate dynamically in the
colormap.
</ul>

<h4><a name="X_server_bugs"></a>Working around bugs in X servers</h4>

<p>
The "<b><tt>use</tt></b>..." resources exist primarily to work around bugs
in X servers.

<ul>
<li>	Old versions of DEC's X server (DECwindows) have bugs that
	require setting <b><tt>useXPutImage</tt></b> or
	<b><tt>useXSetTile</tt></b> to
	<b><tt>false</tt></b>.

<li>	Some servers do not implement backing pixmaps properly, or do not
	have enough memory for them.  If you get strange behavior or "out
	of memory" messages, try setting
	<b><tt>useBackingPixmap</tt></b> to
	<b><tt>false</tt></b>.

<li>	Some servers do not implement tiling properly.  This appears
	as broad bands of color where dither patterns should appear.  If
	this happens, try setting
	<b><tt>useXSetTile</tt></b> to
	<b><tt>false</tt></b>.

<li>	Some servers do not implement bitmap or pixmap displaying properly.
	This may appear as white or black rectangles where characters
	should appear; or characters may appear in "inverse video" (for
	instance, white on a black rectangle rather than black on white).
	If this happens, try setting
	<b><tt>useXPutImage</tt></b> to
	<b><tt>false</tt></b>.
</ul>

<h4><a name="X_fonts"></a>X fonts</h4>

<p>
To use native X11 fonts, Ghostscript must map PostScript font names to the
XLFD font names.  The resources <b><tt>regularFonts</tt></b>
(fonts available in standard or ISO-Latin-1 encoding),
<b><tt>symbolFonts</tt></b> (using Symbol encoding), and
<b><tt>dingbatFonts</tt></b> (using Dingbat encoding) give
the name mapping for different encodings.  The XLFD font name in the
mapping must contain 7 dashes; the X driver adds the additional size and
encoding fields to bring the total number of dashes in the font name to 14.
See the appendix "<a href="#X_font_mappings">X default font mappings</a>"
for the full list of default mappings.

<p>
Users who switch regularly between different X servers may wish to use the
"*" wild card in place of the foundry name
(<b><tt>itc</tt></b>,
<b><tt>monotype</tt></b>,
<b><tt>linotype</tt></b>,
<b><tt>b&amp;h</tt></b>, or
<b><tt>adobe</tt></b>); users who do not switch X servers
should leave the explicit foundry in the name, since it speeds up access to
fonts.

<p>
Ghostscript takes advantage of the "HP XLFD Enhancements," if available, to
use native X11 fonts for fonts that are anamorphically scaled, rotated, or
mirrored.  If the changes have been installed to the X or font server, they
are automatically used when appropriate.

<h4><a name="GS_fonts_as_X_fonts"></a>Using Ghostscript fonts on X displays</h4>

<p>
Font files distributed with Ghostscript can be used on X Windows displays.
You can find full instructions in the
<a href="Fonts.htm#Use_gs_fonts_with_X">documentation on fonts</a>.

<h4><a name="X_device_parameters"></a>X device parameters</h4>

<p>
In addition to the device parameters recognized by <a
href="Language.htm#Device_parameters">all devices</a>, Ghostscript's X
driver provides parameters to adjust its performance.  Users will rarely
need to modify these.  Note that these are parameters to be set with the
<b><tt>-d</tt></b> switch in the command line (e.g.,
<b><tt>-dMaxBitmap=10000000</tt></b>), not resources to be defined in the
<b><tt>~/.Xdefaults</tt></b> file.

<dl>
<dt><b><tt>AlwaysUpdate &lt;boolean&gt;</tt></b>
<dd>If <b><tt>true</tt></b>, the driver updates the screen after each
primitive drawing operation; if <b><tt>false</tt></b> (the default), the
driver uses an intelligent buffered updating algorithm.
</dl>

<dl>
<dt><b><tt>MaxBitmap &lt;integer&gt;</tt></b>
<dd>If the amount of memory required to hold the pixmap for the window is no
more than the value of <b><tt>MaxBitmap</tt></b>, the driver will draw to a
pixmap in Ghostscript's address space (called a "client-side pixmap") and
will copy it to the screen from time to time; if the amount of memory
required for the pixmap exceeds the value of <b><tt>MaxBitmap</tt></b>, the
driver will draw to a server pixmap.  Using a client-side pixmap usually
provides better performance -- for bitmap images, possibly much better
performance -- but since it may require quite a lot of RAM (e.g., about 2.2
Mb for a 24-bit 1024x768 window), the default value of
<b><tt>MaxBitmap</tt></b> is 0.
</dl>

<dl>
<dt><b><tt>MaxTempPixmap, MaxTempImage, MaxBufferedTotal, MaxBufferedArea,
MaxBufferedCount &lt;integer&gt;</tt></b>
<dd>These control various aspects of the driver's buffering behavior.  For
details, please consult the source file <b><tt>gdevx.h</tt></b>.
</dl>

<hr>

<h3><a name="SCO_Unix"></a>SCO Unix</h3>

<p>
Because of bugs in the SCO Unix kernel, Ghostscript will not work if you
select direct screen output and also allow it to write messages on the
console.  If you are using direct screen output, redirect Ghostscript's
terminal output to a file.

<hr>

<h2><a name="Switches"></a>Switches</h2>

<p>
Unless otherwise noted, these switches can be used on all platforms.

<h3><a name="General_switches"></a>General switches</h3>

<h4><a name="Input_control"></a>Input control</h4>

<dl>
<dt><b><tt>@</tt></b><em>filename</em>
<dd>Causes Ghostscript to read <em>filename</em> and treat its contents the
same as the command line.  (This is intended primarily for getting around
DOS's 128-character limit on the length of a command line.)  Switches or
file names in the file may be separated by any amount of white space
(space, tab, line break); there is no limit on the size of the file.
</dl>

<dl>
<dt><b><tt>--</tt></b> <em>filename arg1 ...</em>
<br><b><tt>-+</tt></b> <em>filename arg1 ...</em>
<dd>Takes the next argument as a file name as usual, but takes all
remaining arguments (even if they have the syntactic form of switches) and
defines the name <b><tt>ARGUMENTS</tt></b> in userdict (not systemdict) as
an array of those strings, <em>before</em> running the file.  When
Ghostscript finishes executing the file, it exits back to the shell.
</dl>

<dl>
<dt><b><tt>-@</tt></b> <em>filename arg1 ...</em>
<dd>Does the same thing as <b><tt>--</tt></b> and <b><tt>-+</tt></b>, but
expands <b><tt>@</tt></b><em>filename</em> arguments.
</dl>

<dl>
<dt><b><tt>-</tt></b>
<br><b><tt>-_</tt></b>
<dd>These are not really switches: they tell Ghostscript to read from
standard input, which is coming from a file or a pipe,
with or without buffering.
See <a href="#Pipe_input">"Input from a pipe"</a> above.
</dl>

<dl>
<dt><b><tt>-c</tt></b> <em>tokens ...</em>
<dd>Interprets arguments as PostScript code up to the next argument that
begins with "<b><tt>-</tt></b>" followed by a non-digit, or with
"<b><tt>@</tt></b>".  For example, if the file <b><tt>quit.ps</tt></b>
contains just the word "<b><tt>quit</tt></b>", then
<b><tt>-c&nbsp;quit</tt></b> on the command line is equivalent to
<b><tt>quit.ps</tt></b> there.  Each argument must be exactly one token, as
defined by the <b><tt>token</tt></b> operator.
</dl>

<dl>
<dt><b><tt>-f</tt></b>
<dd>Interprets following non-switch arguments as file names to be executed
using the normal <b><tt>run</tt></b> command.  Since this is the default
behavior, <b><tt>-f</tt></b> is useful only for terminating the list of
tokens for the <b><tt>-c</tt></b> switch.
</dl>

<dl>
<dt><b><tt>-f</tt></b><em>filename</em>
<dd>Execute the given file, even if its name begins with a
"<b><tt>-</tt></b>" or "<b><tt>@</tt></b>".
</dl>

<h4><a name="File_searching"></a>File searching</h4>

<p>
Note that by "library files" here we mean all the files identified using
the search rule under "<a href="#Finding_files">How Ghostscript finds
files</a>" above: Ghostscript's own initialization files, fonts, and files
named on the command line.

<dl>
<dt><a name="I_switch"></a><b><tt>-I</tt></b><em>directories</em>
<dd>Adds the designated list of directories at the head of the search path
for library files.
</dl>

<dl>
<dt><a name="P_switch"></a><b><tt>-P</tt></b>
<dd>Makes Ghostscript look first in the current directory for library
files.  This is currently the default.
</dl>

<dl>
<dt><a name="P-_switch"></a><b><tt>-P-</tt></b>
<dd>Makes Ghostscript <b><em>not</em></b> look first in the current
directory for library files (unless, of course, the first explicitly
supplied directory is "<b><tt>.</tt></b>").
</dl>

<h4><a name="Parameters"></a>Setting parameters</h4>

<dl>
<dt><b><tt>-D</tt></b><em>name</em>
<br><b><tt>-d</tt></b><em>name</em>
<dd>Define a name in systemdict with value=true.
</dl>

<dl>
<dt><b><tt>-D</tt></b><em>name</em><b><tt>=</tt></b><em>token</em>
<br><b><tt>-d</tt></b><em>name</em><b><tt>=</tt></b><em>token</em>
<dd>Define a name in systemdict with the given definition.  The token must
be exactly one token (as defined by the <b><tt>token</tt></b> operator) and
must not contain any whitespace.  If the token is a non-literal name, it
must be true, false, or null.
</dl>

<dl>
<dt><b><tt>-S</tt></b><em>name</em><b><tt>=</tt></b><em>string</em>
<br><b><tt>-s</tt></b><em>name</em><b><tt>=</tt></b><em>string</em>
<dd>Define a name in systemdict with a given string as value.  This is
different from <b><tt>-d</tt></b>.  For example, <b><tt>-dXYZ=35</tt></b>
on the command line is equivalent to the program fragment

<blockquote><b><tt>
/XYZ 35 def
</tt></b></blockquote>

<p>
whereas <b><tt>-sXYZ=35</tt></b> is equivalent to

<blockquote><b><tt>
/XYZ (35) def
</tt></b></blockquote>
</dl>

<dl>
<dt><b><tt>-u</tt></b><em>name</em>
<dd>Un-define a name, cancelling <b><tt>-d</tt></b> or <b><tt>-s</tt></b>.
</dl>

<p>
Note that the initialization file <b><tt>gs_init.ps</tt></b> makes
<b><tt>systemdict</tt></b> read-only, so the values of names defined with
<b><tt>-D</tt></b>, <b><tt>-d</tt></b>, <b><tt>-S</tt></b>, and
<b><tt>-s</tt></b> cannot be changed -- although, of course, they can be
superseded by definitions in <b><tt>userdict</tt></b> or other dictionaries.
However, device parameters set this way (<b><tt>PageSize</tt></b>,
<b><tt>Margins</tt></b>, etc.) are <em>not</em> read-only, and <em>can</em>
be changed by code in PostScript files.

<dl>
<dt><b><tt>-g</tt></b><em>number1</em><b><tt>x</tt></b><em>number2</em>
<dd>Equivalent to <b><tt>-dDEVICEWIDTH=</tt></b><em>number1</em> and
<b><tt>-dDEVICEHEIGHT=</tt></b><em>number2</em>, specifying the device
width and height in pixels for the benefit of devices such as X11 windows
and VESA displays that require (or allow) you to specify width and height.
Note that this causes documents of other sizes to be clipped, not scaled:
see <b><tt>-dFIXEDMEDIA</tt></b> below.
</dl>

<dl>
<dt><a name="Resolution_switch"></a><b><tt>-r</tt></b><em>number</em> (same
as <b><tt>-r</tt></b><em>number</em><b><tt>x</tt></b><em>number</em>)
<br><b><tt>-r</tt></b><em>number1</em><b><tt>x</tt></b><em>number2</em>
<dd>Equivalent to <b><tt>-dDEVICEXRESOLUTION=</tt></b><em>number1</em> and
<b><tt>-dDEVICEYRESOLUTION=</tt></b><em>number2</em>, specifying the device
horizontal and vertical resolution in pixels per inch for the benefit of
devices such as printers that support multiple X and Y resolutions.
</dl>

<h4><a name="Quiet"></a>Suppress messages</h4>

<dl>
<dt><a name="Quiet"></a><b><tt>-q</tt></b>
<dd>Quiet startup: suppress normal startup messages, and also do the
equivalent of <a href="#dQUIET"><b><tt>-dQUIET</tt></b></a>.
</dl>

<h3><a name="Parameter_switches"></a>Parameter switches (<b><tt>-d</tt></b> and <b><tt>-s</tt></b>)</h3>

<p>
As noted above, <b><tt>-d</tt></b> and <b><tt>-s</tt></b> define initial
values for PostScript names.  Some of these names are parameters that
control the interpreter or the graphics engine.  You can also use
<b><tt>-d</tt></b> or <b><tt>-s</tt></b> to define a value for any device
parameter of the initial device (the one defined with
<b><tt>-sDEVICE=</tt></b>, or the default device if this switch is not
used).  For example, since the <b><tt>ppmraw</tt></b> device has a numeric
<b><tt>GrayValues</tt></b> parameter that controls the number of bits per
component, <b><tt>-sDEVICE=ppmraw -dGrayValues=16</tt></b> will make this
the default device and set the number of bits per component to 4 (log2(16)).

<h4><a name="Rendering_parameters"></a>Rendering parameters</h4>

<dl>
<dt><b><tt>-dCOLORSCREEN
<br>-dCOLORSCREEN=0
<br>-dCOLORSCREEN=false</tt></b>
<dd>On high-resolution devices (at least 150 dpi resolution, or
<b><tt>-dDITHERPPI</tt></b> specified), <b><tt>-dCOLORSCREEN</tt></b>
forces the use of separate halftone screens with different angles for CMYK
or RGB if halftones are needed (this produces the best-quality output);
<b><tt>-dCOLORSCREEN=0</tt></b> uses separate screens with the same
frequency and angle; <b><tt>-dCOLORSCREEN=false</tt></b> forces the use of
a single binary screen.  The default if <b><tt>COLORSCREEN</tt></b> is not
specified is to use separate screens with different angles if the device
has fewer than 5 bits per color, and a single binary screen (which is never
actually used under normal circumstances) on all other devices.
</dl>

<dl>
<dt><b><tt>-dDITHERPPI=</tt></b><em>lpi</em>
<dd>Forces all devices to be considered high-resolution, and forces use of
a halftone screen or screens with <em>lpi</em> lines per inch, disregarding
the actual device resolution.  Reasonable values for <em>lpi</em> are
<b><em>N</em></b>/5 to <b><em>N</em></b>/20, where <b><em>N</em></b> is the
resolution in dots per inch.
</dl>

<dl>
<dt><b><tt>-dDOINTERPOLATE</tt></b>
<dd>Turns on image interpolation for all images, improving image quality for
scaled images at the expense of speed.  Note that
<b><tt>-dNOINTERPOLATE</tt></b> overrides <b><tt>-dDOINTERPOLATE</tt></b> if
both are specified.
</dl>

<dl>
<dt><b><tt>-dNOCIE</tt></b>
<dd>Substitutes <b><tt>DeviceGray</tt></b> and <b><tt>DeviceRGB</tt></b>
for CIEBasedA and CIEBasedABC color spaces respectively.  Useful only on
very slow systems where color accuracy is less important.
</dl>

<dl>
<dt><b><tt>-dNOINTERPOLATE</tt></b>
<dd>Turns off image interpolation, improving performance on interpolated
images at the expense of image quality.  <b><tt>-dNOINTERPOLATE</tt></b>
overrides <b><tt>-dDOINTERPOLATE</tt></b>.
</dl>

<h4><a name="Page_parameters"></a>Page parameters</h4>

<dl>
<dt><a name="FIXEDMEDIA"></a><b><tt>-dFIXEDMEDIA</tt></b>
<dd>Causes the media size to be fixed after initialization, forcing pages
of other sizes or orientations to be clipped.  This may be useful when
printing documents on a printer that can handle their requested paper size
but whose default is some other size.  Note that <b><tt>-g</tt></b>
automatically sets <b><tt>-dFIXEDMEDIA</tt></b>, but
<b><tt>-sPAPERSIZE=</tt></b> does not.
</dl>

<dl>
<dt><b><tt>-dFIXEDRESOLUTION</tt></b>
<dd>Causes the media resolution to be fixed similarly.  <b><tt>-r</tt></b>
automatically sets <b><tt>-dFIXEDRESOLUTION</tt></b>.
</dl>

<dl>
<dt><b><tt>-dORIENT1=true
<br>-dORIENT1=false</tt></b>
<dd>Defines the meaning of the 0 and 1 orientation values for the
setpage[params] compatibility operators.  The default value of
<b><tt>ORIENT1</tt></b> is true (set in <b><tt>gs_init.ps</tt></b>), which
is the correct value for most files that use setpage[params] at all,
namely, files produced by badly designed applications that "know" that the
output will be printed on certain roll-media printers: these applications
use 0 to mean landscape and 1 to mean portrait.
<b><tt>-dORIENT1=false</tt></b> declares that 0 means portrait and 1 means
landscape, which is the convention used by a smaller number of files
produced by properly written applications.
</dl>

<dl>
<dt><b><tt>-dDEVICEWIDTHPOINTS=</tt></b><em>w</em>
<br><b><tt>-dDEVICEHEIGHTPOINTS=</tt></b><em>h</em>
<dd>Sets the initial page width to <em>w</em> or initial page height to
<em>h</em> respectively, specified in 1/72" units.
</dl>

<h4><a name="Font_related_parameters"></a>Font-related parameters</h4>

<dl>
<dt><a name="DISKFONTS"></a><b><tt>-dDISKFONTS</tt></b>
<dd>Causes individual character outlines to be loaded from the disk the
first time they are encountered.  (Normally Ghostscript loads all the
character outlines when it loads a font.)  This may allow loading more
fonts into memory at the expense of slower rendering.
<b><tt>DISKFONTS</tt></b> is effective only if the diskfont feature was
built into the executable; otherwise it is ignored.
</dl>

<dl>
<dt><b><tt>-dLOCALFONTS</tt></b>
<dd>Causes Type 1 fonts to be loaded into the current VM -- normally local
VM -- instead of always being loaded into global VM.  Useful only for
compatibility with Adobe printers for loading some obsolete fonts.
</dl>

<dl>
<dt><b><tt>-dNOCCFONTS</tt></b>
<dd>Suppresses the use of fonts precompiled into the Ghostscript executable.
See <a href="Fonts.htm#Precompiling">"Precompiling fonts"</a> in the
documentation on fonts for details.  This is probably useful only for
debugging.
</dl>

<dl>
<dt><a name="FONTMAP_switch"></a><b><tt>-dNOFONTMAP</tt></b>
<dd>Suppresses the normal loading of the Fontmap file.  This may be useful
in environments without a file system.
</dl>

<dl>
<dt><b><tt>-dNOFONTPATH</tt></b>
<dd>Suppresses consultation of <b><tt>GS_FONTPATH</tt></b>.  This may be
useful for debugging.
</dl>

<dl>
<dt><b><tt>-dNOPLATFONTS</tt></b>
<dd>Disables the use of fonts supplied by the underlying platform (X
Windows or Microsoft Windows).  This may be needed if the platform fonts
look undesirably different from the scalable fonts.
</dl>

<dl>
<dt><b><tt>-sFONTMAP=</tt></b><em>filename1</em><b><tt>;</tt></b><em>filename2</em><b><tt>;</tt></b><em>...</em>
<dd>Specifies alternate name or names for the Fontmap file.  Note that the
names are separated by "<b><tt>:</tt></b>" on Unix systems, by
"<b><tt>;</tt></b>" on DOS or MS Windows systems, and by
"<b><tt>,</tt></b>" on VMS systems, just as for search paths.
</dl>

<dl>
<dt><b><tt>-sFONTPATH=</tt></b><em>dir1</em><b><tt>;</tt></b><em>dir2</em><b><tt>;</tt></b><em>...</em>
<dd>Specifies a list of directories that will be scanned when looking for
fonts not found on the search path, overriding the environment variable
<b><tt>GS_FONTPATH</tt></b>.
</dl>

<dl>
<dt><b><tt>-sSUBSTFONT=</tt></b><em>fontname</em>
<dd>Causes the given font to be substituted for all unknown fonts, instead
of using the normal intelligent substitution algorithm.  Also, in this
case, the font returned by <b><tt>findfont</tt></b> is the actual font
named "<em>fontname</em>", not a copy of the font with the
<b><tt>FontName</tt></b> changed to the requested one.
</dl>

<h4><a name="Interaction_related_parameters"></a>Interaction-related parameters</h4>

<dl>
<dt><b><tt>-dBATCH</tt></b>
<dd>Causes Ghostscript to exit after processing all files named on the
command line, rather than going into an interactive loop reading PostScript
commands.  Equivalent to putting -c quit at the end of the command line.
</dl>

<dl>
<dt><b><tt>-dNOPAGEPROMPT</tt></b>
<dd>Disables only the prompt, but not the pause, at the end of each page.
This may be useful on PC displays that get confused if a program attempts
to write text to the console while the display is in a graphics mode.
</dl>

<dl>
<dt><a name="NoPause"></a><b><tt>-dNOPAUSE</tt></b>
<dd>Disables the prompt and pause at the end of each page.  Normally one
should use this (along with <b><tt>-dBATCH</tt></b>) when producing output
on a printer or to a file; it also may be desirable for applications where
another program is "driving" Ghostscript.
</dl>

<dl>
<dt><b><tt>-dNOPROMPT</tt></b>
<dd>Disables the prompt printed by Ghostscript when it expects interactive
input, as well as the end-of-page prompt (<b><tt>-dNOPAGEPROMPT</tt></b>);
also disables the implicit <b><tt>flushpage</tt></b> that normally occurs
each time Ghostscript asks for more input.  This allows piping input
directly into Ghostscript, as long as the data doesn't refer to
<b><tt>currentfile</tt></b>.
</dl>

<dl>
<dt><a name="dQUIET"></a><b><tt>-dQUIET</tt></b>
<dd>Suppresses routine information comments on standard output.  This is
currently necessary when redirecting device output to standard output.
</dl>

<dl>
<dt><b><tt>-dSHORTERRORS</tt></b>
<dd>Makes certain error and information messages more Adobe-compatible.
</dl>

<dl>
<dt><b><tt>-sstdout=</tt></b><em>filename</em>
<dd>Redirect PostScript <b><tt>%stdout</tt></b> to a file or 
<b><tt>stderr</tt></b>, to avoid it being mixed with device stdout.
To redirect stdout to stderr use <b><tt>-sstdout=%stderr</tt></b>.
To cancel redirection of stdout use <b><tt>-sstdout=%stdout</tt></b>
or <b><tt>-sstdout=-</tt></b>.
</dl>

<dl>
<dt><b><tt>-dTTYPAUSE</tt></b>
<dd>Causes Ghostscript to read a character from <b><tt>/dev/tty</tt></b>,
rather than standard input, at the end of each page.  This may be useful if
input is coming from a pipe.  Note that <b><tt>-dTTYPAUSE</tt></b>
overrides <b><tt>-dNOPAUSE</tt></b>.
</dl>

<h4><a name="Output_selection_parameters"></a>Device and output selection parameters</h4>

<dl>
<dt><b><tt>-dNODISPLAY</tt></b>
<dd>Initializes Ghostscript with a null device (a device that discards the
output image) rather than the default device or the device selected with
<b><tt>-sDEVICE=</tt></b>.  This is usually useful only when running
PostScript code whose purpose is to compute something rather than to
produce an output image; for instance, when converting PostScript to PDF.
</dl>

<dl>
<dt><a name="DEVICE_switch"></a><b><tt>-sDEVICE=</tt></b><em>device</em>
<dd>Selects an alternate <a href="#Output_device">initial output
device</a>.
</dl>

<dl>
<dt><b><tt>-sOutputFile=</tt></b><em>filename</em>
<dd>Selects an alternate output file (or pipe) for the initial output
device, as described above.
</dl>

<h4><a name="Other_parameters"></a>Other parameters</h4>

<dl>
<dt><b><tt>-dDELAYBIND</tt></b>
<dd>Causes <b><tt>bind</tt></b> to remember all its invocations, but not
actually execute them until the <b><tt>.bindnow</tt></b> procedure is
called.  Useful only for certain specialized packages like
<b><tt>pstotext</tt></b> that redefine operators.
</dl>

<dl> 
<dt><b><tt>-dDOPDFMARKS</tt></b> 
<dd>Causes <b><tt>pdfmark</tt></b> to be called for bookmarks, 
annotations, links and cropbox when processing PDF files. 
Normally, <b><tt>pdfmark</tt></b> is only called for these types 
for PostScript files or when the output device requests it 
(e.g. pdfwrite device). 
</dl> 

<dl>
<dt><b><tt>-dNOBIND</tt></b>
<dd>Disables the <b><tt>bind</tt></b> operator.  Useful only for debugging.
</dl>

<dl>
<dt><b><tt>-dNOCACHE</tt></b>
<dd>Disables character caching.  Useful only for debugging.
</dl>

<dl>
<dt><b><tt>-dNOGC</tt></b>
<dd>Suppresses the initial automatic enabling of the garbage collector in
Level 2 systems.  (The <b><tt>vmreclaim</tt></b> operator is not disabled.)
Useful only for debugging.
</dl>

<dl>
<dt><b><tt>-dNOSAFER</tt></b> (equivalent to <b><tt>-dDELAYSAFER</tt></b>).
<dd>This flag disables SAFER mode until the <b><tt>.setsafe</tt></b>
procedure is run. This is intended for clients or scripts that cannot
operate in SAFER mode. If Ghostscript is started with <b><tt>-dNOSAFER</tt></b>
or <b><tt>-dDELAYSAFER</tt></b>, PostScript programs are allowed to read, write,
rename or delete any files in the system that are not protected by operating
system permissions.
<p><b>This mode should be used with caution, and <tt>.setsafe</tt> should be
run prior to running any PostScript file with unknown contents.</b>
</dl>

<a name="Safer"></a>
<dl>
<dt><b><tt>-dSAFER</tt></b>
<dd>Disables the <b><tt>deletefile</tt></b> and <b><tt>renamefile</tt></b>
operators, and the ability to open piped commands (<b><tt>%pipe%</tt></b><em>cmd</em>)
at all. Only <b><tt>%stdout</tt></b> and <b><tt>%stderr</tt></b> can be opened
for writing.
<p>
This mode also sets the <a href="Language.htm#LockSafetyParams">.LockSafetyParams</a>
parameter of the default device, or the device specified with the <b><tt>-sDEVICE= </tt></b>
switch to protect against programs that attempt to write to files using the
OutputFile device parameter. Note that since the device parameters specified
on the command line (including OutputFile) are set prior to SAFER mode,
the <b><tt>-sOutputFile=...</tt></b> on the command line is unrestricted.
<p>
<b><tt>SAFER</tt></b> mode also prevents changing the /GenericResourceDir,
/FontResourceDir and either the /SystemParamsPassword or the /StartJobPassword.
<p>
<b>Note: </b>While SAFER mode is not the default, in a subsequent release of
Ghostscript, SAFER mode will be the default thus scripts or programs that need
to open files or set restricted parameters will require the <b><tt>-dNOSAFER</tt></b>
command line option.
<p>
When running -dNOSAFER it is possible to perform a <b><tt>save</tt></b>,
followed by <b><tt>.setsafe</tt></b>, execute a file or procedure in SAFER mode,
then use <b><tt>restore</tt></b> to return to NOSAFER mode. In order to prevent
the save object from being restored by the foreign file or procedure, the
<a href="Language.htm#Runandhide"><b>.runandhide</b></a> operator should
be used to hide the save object from the restricted procedure.
</dl>

<dl>
<dt><b><tt>-dPARANOIDSAFER</tt></b>
<dd>Disables reading of files other than <b><tt>%stdin</tt></b>, those given as
a command line argument, or those contained on one of the paths given by
LIBPATH and FONTPATH and specified by the system params /FontResourceDir
and /GenericResourceDir.
<p>
<b><tt>-dPARANOIDSAFER</tt></b> implies <b><tt>-dSAFER</tt></b> so if
<b><tt>-dPARANOIDSAFER</tt></b> is given on the command line, 
<b><tt>-dSAFER</tt></b> is optional.
</dl>

<dl>
<dt><b><tt>-dSTRICT</tt></b>
<dd>Disables as many Ghostscript extensions as feasible, to be more helpful
in debugging applications that produce output for Adobe and other RIPs.
</dl>

<dl>
<dt><b><tt>-dWRITESYSTEMDICT</tt></b>
<dd>Leaves <b><tt>systemdict</tt></b> writable.  This is necessary when
running special utility programs such as <b><tt>font2c</tt></b> and
<b><tt>pcharstr</tt></b>, which must bypass normal PostScript access
protection.
</dl>

<hr>

<h2><a name="Improving_performance"></a>Improving performance</h2>

<p>
Ghostscript attempts to find an optimum balance between speed and memory
consumption, but there are some cases in which you may get a very large
speedup by telling Ghostscript to use more memory.

<ul>

<li>
If you are using X Windows, setting the <b><tt>-dMaxBitmap=</tt></b>
parameter described <a href="#X_device_parameters">above</a> may
dramatically improve performance on files that have a lot of bitmap images.

<li>
If you are using Chinese, Japanese, or other fonts with very large character
sets, adding the following sequence of switches before the first file name
may dramatically improve performance at the cost of an additional 2-3 Mb of
memory: <b><tt>-c&nbsp;3000000&nbsp;setvmthreshold&nbsp;-f</tt></b>.

</ul>

<hr>

<h2><a name="Debugging"></a>Debugging</h2>

<p>
The information here describing the debugging switches is probably
interesting only to developers.  The <b><tt>-Z</tt></b> switch applies only
if the interpreter was <a href="Make.htm#Debugging">built for a debugging
configuration</a>.  In the table below, the first column is a debugging
switch, the second is an equivalent switch (if any) and the third is its
usage.

<table cellpadding=0 cellspacing=0>
<tr><th colspan=5 bgcolor="#CCCC00"><hr><font size="+1">Switches used in debugging</font><hr>
<tr>	<th align=left>Switch
	<td>&nbsp;&nbsp;
	<th align=left>Equivalent
	<td>&nbsp;&nbsp;
	<th>&nbsp;
<tr>	<td colspan=5><hr>
<tr>	<td valign=top><b><tt>-A</tt></b>
	<td>&nbsp;
	<td valign=top><b><tt>-Z@</tt></b>
	<td>&nbsp;
	<td>Fill empty storage with a distinctive bit pattern for debugging

<tr>	<td valign=top><b><tt>-A-</tt></b>
	<td>&nbsp;
	<td valign=top><b><tt>-Z-@</tt></b>
	<td>&nbsp;
	<td>Turn off <b><tt>-A</tt></b>
<tr>	<td valign=top><b><tt>-B</tt></b><em>size</em>
	<td>&nbsp;
	<td>&nbsp;
	<td>&nbsp;
	<td>Run all subsequent files named on the command line (except for
	    <b><tt>-F</tt></b>) through the run_string interface, using a
	    buffer of <em>size</em> bytes
<tr>	<td valign=top><b><tt>-B-</tt></b>
	<td>&nbsp;
	<td>&nbsp;
	<td>&nbsp;
	<td>Turn off <b><tt>-B</tt></b>: run subsequent files (except for
	    <b><tt>-F</tt></b>) directly in the normal way
<tr>	<td valign=top><b><tt>-E</tt></b>
	<td>&nbsp;
	<td valign=top><b><tt>-Z#</tt></b>
	<td>&nbsp;
	<td>Turn on tracing of error returns from operators
<tr>	<td valign=top><b><tt>-E-</tt></b>
	<td>&nbsp;
	<td valign=top><b><tt>-Z-#</tt></b>
	<td>&nbsp;
	<td>Turn off <b><tt>-E</tt></b>
<tr>	<td valign=top><b><tt>-F</tt></b><em>file</em>
	<td>&nbsp;
	<td>&nbsp;
	<td>&nbsp;
	<td>Execute the file with <b><tt>-B1</tt></b> temporarily in effect
<tr>	<td valign=top><b><tt>-K</tt></b><em>n</em>
	<td>&nbsp;
	<td>&nbsp;
	<td>&nbsp;
	<td>Limit the total amount of memory that the interpreter can have
	    allocated at any one time to <b><em>n</em></b>K bytes.
	    <b><em>n</em></b> is a positive decimal integer.
<tr>	<td valign=top><b><tt>-M</tt></b><em>n</em>
	<td>&nbsp;
	<td>&nbsp;
	<td>&nbsp;
	<td>Force the interpreter's allocator to acquire additional memory
	    in units of <b><em>n</em></b>K bytes, rather than the default
	    (currently 20K on DOS systems, 50K on Unix). <b><em>n</em></b>
	    is a positive decimal integer, on DOS systems no greater than
	    63.
<tr>	<td valign=top><b><tt>-N</tt></b><em>n</em>
	<td>&nbsp;
	<td>&nbsp;
	<td>&nbsp;
	<td>Allocate space for <b><em>n</em></b>K names, rather than the
	    default (normally 64K).  <b><em>n</em></b> may be greater than
	    64 only if <b><tt>EXTEND_NAMES</tt></b> was defined when the
	    interpreter was compiled .
<tr>	<td valign=top><b><tt>-Z</tt></b><em>xxx</em><br><b><tt>-Z-</tt></b><em>xxx</em>
	<td>&nbsp;
	<td>&nbsp;
	<td>&nbsp;
	<td>Turn debugging printout on (off). Each of the <em>xxx</em>
	    characters selects an option.  Case is significant: "a" and
	    "A" have different meanings.

<dl compact>
<dt><b><tt>0</tt></b><dd>garbage collector, minimal detail
<dt><b><tt>1</tt></b><dd>type 1 and type 42 font interpreter
<dt><b><tt>2</tt></b><dd>curve subdivider/rasterizer
<dt>&nbsp;&nbsp;&nbsp;<b><tt>3</tt></b><dd>curve subdivider/rasterizer, detail
<dt><b><tt>4</tt></b><dd>garbage collector (strings)
<dt>&nbsp;&nbsp;&nbsp;<b><tt>5</tt></b><dd>garbage collector (strings, detail)
<dt><b><tt>6</tt></b><dd>garbage collector (chunks, roots)
<dt>&nbsp;&nbsp;&nbsp;<b><tt>7</tt></b><dd>garbage collector (objects)
<dt>&nbsp;&nbsp;&nbsp;<b><tt>8</tt></b><dd>garbage collector (refs)
<dt>&nbsp;&nbsp;&nbsp;<b><tt>9</tt></b><dd>garbage collector (pointers)
<dt><b><tt>a</tt></b><dd>allocator (large blocks only)
<dt>&nbsp;&nbsp;&nbsp;<b><tt>A</tt></b><dd>allocator (all calls)
<dt><b><tt>b</tt></b><dd>bitmap image processor
<dt>&nbsp;&nbsp;&nbsp;<b><tt>B</tt></b><dd>bitmap images, detail
<dt><b><tt>c</tt></b><dd>color/halftone mapper
<dt><b><tt>d</tt></b><dd>dictionary put/undef
<dt>&nbsp;&nbsp;&nbsp;<b><tt>D</tt></b><dd>dictionary lookups
<dt><b><tt>e</tt></b><dd>external (OS-related) calls
<dt><b><tt>f</tt></b><dd>fill algorithm (summary)
<dt>&nbsp;&nbsp;&nbsp;<b><tt>F</tt></b><dd>fill algorithm (detail)
<dt><b><tt>g</tt></b><dd>gsave/grestore[all]
<dt><b><tt>h</tt></b><dd>halftone renderer
<dt>&nbsp;&nbsp;&nbsp;<b><tt>H</tt></b><dd>halftones, every pixel
<dt><b><tt>i</tt></b><dd>interpreter, just names
<dt>&nbsp;&nbsp;&nbsp;<b><tt>I</tt></b><dd>interpreter, everything
<dt><b><tt>j</tt></b><dd>(Japanese) composite fonts
<dt><b><tt>k</tt></b><dd>character cache and xfonts
<dt>&nbsp;&nbsp;&nbsp;<b><tt>K</tt></b><dd>character cache, every access
<dt><b><tt>l</tt></b><dd>command lists, bands
<dt>&nbsp;&nbsp;&nbsp;<b><tt>L</tt></b><dd>command lists, everything
<dt><b><tt>m</tt></b><dd>makefont and font cache
<dt><b><tt>n</tt></b><dd>name lookup (new names only)
<dt><b><tt>o</tt></b><dd>outliner (stroke)
<dt>&nbsp;&nbsp;&nbsp;<b><tt>O</tt></b><dd>stroke detail
<dt><b><tt>p</tt></b><dd>band list paths
<dt>&nbsp;&nbsp;&nbsp;<b><tt>P</tt></b><dd>all paths
<dt><b><tt>q</tt></b><dd>clipping
<dt><b><tt>r</tt></b><dd>arc renderer
<dt><b><tt>s</tt></b><dd>streams
<dt>&nbsp;&nbsp;&nbsp;<b><tt>S</tt></b><dd>scanner
<dt><b><tt>t</tt></b><dd>tiling algorithm
<dt><b><tt>u</tt></b><dd>undo saver (for save/restore), finalization
<dt>&nbsp;&nbsp;&nbsp;<b><tt>U</tt></b><dd>undo saver, more detail
<dt><b><tt>v</tt></b><dd>alpha/transparency
<dt>&nbsp;&nbsp;&nbsp;<b><tt>V</tt></b><dd>alpha/transparency, more detail
<dt><b><tt>w</tt></b><dd>compression encoder/decoder
<dt><b><tt>x</tt></b><dd>transformations
<dt><b><tt>y</tt></b><dd>Type 1 hints
<dt>&nbsp;&nbsp;&nbsp;<b><tt>Y</tt></b><dd>Type 1 hints, every access
<dt><b><tt>z</tt></b><dd>trapezoid fill
<dt><b><tt>#</tt></b><dd>operator error returns
<dt><b><tt>%</tt></b><dd>externally processed comments
<dt><b><tt>*</tt></b><dd>image and RasterOp parameters
<dt><b><tt>:</tt></b><dd>command list and allocator/time summary
<dt><b><tt>~</tt></b><dd>math functions and Functions
<dt><b><tt>'</tt></b><dd>contexts, create/destroy
<dt>&nbsp;&nbsp;&nbsp;<b><tt>"</tt></b><dd>contexts, every operation
<dt><b><tt>^</tt></b><dd>reference counting
<dt><b><tt>_</tt></b><dd>high-level output
<dt><b><tt>|</tt></b><dd>(reserved for experimental code)
</dl>

<p>
The following switch affects what is printed, but does not select specific
items for printing:

<dl compact>
<dt><b><tt>/</tt></b><dd>include file name and line number on all trace output
</dl>

<p>
These switches select debugging options other than what should be printed:

<dl compact>
<dt><b><tt>$</tt></b><dd>set unused parts of object references to
identifiable garbage values
<dt><b><tt>+</tt></b><dd>use minimum-size stack blocks
<dt><b><tt>,</tt></b><dd>don't use path-based banding
<dt><b><tt>`</tt></b><dd>don't use high-level banded images
<dt><b><tt>.</tt></b><dd>use small-memory table sizes even on large-memory
machines
<dt><b><tt>?</tt></b><dd>validate pointers before, during and after garbage
collection, also before and after save and restore; also make other
allocator validity checks
<dt><b><tt>@</tt></b><dd>fill newly allocated, garbage-collected, and freed
storage with a marker (a1, c1, and f1 respectively)
</dl>
</table>

<hr>

<h2><a name="Known_paper_sizes"></a>Appendix: Paper sizes known to Ghostscript</h2>

<p>
The paper sizes known to Ghostscript are defined at the beginning of the
initialization file <b><tt>gs_statd.ps</tt></b>; see the comments there for
more details about the definitions. The table here lists them by name and
size.  <b><tt>gs_statd.ps</tt></b> defines their sizes exactly in points,
and the dimensions in inches (at 72 points per inch) and centimeters shown
in the table are derived from those, rounded to the nearest 0.1 unit.  A
guide to international paper sizes can be found at

<blockquote>
<a href="http://www.twics.com/~eds/papersize.html">http://www.twics.com/~eds/papersize.html</a>
</blockquote>

<table cellpadding=0 cellspacing=0>
<tr><th colspan=13 bgcolor="#CCCC00"><hr><font size="+1">Paper sizes known to Ghostscript</font><hr>
<tr><th colspan=13>U.S. standard
<tr>	<td>&nbsp;
	<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
	<th colspan=3>Inches
	<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
	<th colspan=3>cm
	<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
	<th colspan=3>Points
	<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
	<td>&nbsp;
<tr>	<th align=left>Name
	<td>&nbsp;
	<th>&nbsp;W&nbsp;
	<td>&times;
	<th>&nbsp;H&nbsp;
	<td>&nbsp;
	<th>&nbsp;W&nbsp;
	<td>&times;
	<th>&nbsp;H&nbsp;
	<td>&nbsp;
	<th>&nbsp;W&nbsp;
	<td>&times;
	<th>&nbsp;H&nbsp;
	<td>&nbsp;
	<td>&nbsp;
<tr>	<td colspan=13><hr>
<tr>	<td>11x17
	<td>&nbsp;&nbsp;<td align=right>11.0<td>&nbsp;&nbsp;<td align=right>17.0<td>&nbsp;&nbsp;<td align=right>27.9<td>&nbsp;&nbsp;<td align=right>43.2<td>&nbsp;&nbsp;<td align=right>792<td>&nbsp;&nbsp;<td align=right>1224<td>&nbsp;&nbsp;<td>11&times;17in portrait
<tr>	<td>ledger
	<td>&nbsp;<td align=right>17.0<td>&nbsp;<td align=right>11.0<td>&nbsp;<td align=right>43.2<td>&nbsp;<td align=right>27.9<td>&nbsp;<td align=right>1224<td>&nbsp;<td align=right>792<td>&nbsp;<td>11&times;17in landscape
<tr>	<td>legal
	<td>&nbsp;<td align=right>8.5<td>&nbsp;<td align=right>14.0<td>&nbsp;<td align=right>21.6<td>&nbsp;<td align=right>35.6<td>&nbsp;<td align=right>612<td>&nbsp;<td align=right>1008<td>&nbsp;<td>&nbsp;
<tr>	<td>letter
	<td>&nbsp;<td align=right>8.5<td>&nbsp;<td align=right>11.0<td>&nbsp;<td align=right>21.6<td>&nbsp;<td align=right>27.9<td>&nbsp;<td align=right>612<td>&nbsp;<td align=right>792<td>&nbsp;<td>&nbsp;
<tr>	<td>lettersmall
	<td>&nbsp;<td align=right>8.5<td>&nbsp;<td align=right>11.0<td>&nbsp;<td align=right>21.6<td>&nbsp;<td align=right>27.9<td>&nbsp;<td align=right>612<td>&nbsp;<td align=right>792<td>&nbsp;<td>&nbsp;
<tr>	<td>archE
	<td>&nbsp;<td align=right>36.0<td>&nbsp;<td align=right>48.0<td>&nbsp;<td align=right>91.4<td>&nbsp;<td align=right>121.9<td>&nbsp;<td align=right>2592<td>&nbsp;<td align=right>3456<td>&nbsp;<td>&nbsp;
<tr>	<td>archD
	<td>&nbsp;<td align=right>24.0<td>&nbsp;<td align=right>36.0<td>&nbsp;<td align=right>61.0<td>&nbsp;<td align=right>91.4<td>&nbsp;<td align=right>1728<td>&nbsp;<td align=right>2592<td>&nbsp;<td>&nbsp;
<tr>	<td>archC
	<td>&nbsp;<td align=right>18.0<td>&nbsp;<td align=right>24.0<td>&nbsp;<td align=right>45.7<td>&nbsp;<td align=right>61.0<td>&nbsp;<td align=right>1296<td>&nbsp;<td align=right>1728<td>&nbsp;<td>&nbsp;
<tr>	<td>archB
	<td>&nbsp;<td align=right>12.0<td>&nbsp;<td align=right>18.0<td>&nbsp;<td align=right>30.5<td>&nbsp;<td align=right>45.7<td>&nbsp;<td align=right>864<td>&nbsp;<td align=right>1296<td>&nbsp;<td>&nbsp;
<tr>	<td>archA
	<td>&nbsp;<td align=right>9.0<td>&nbsp;<td align=right>12.0<td>&nbsp;<td align=right>22.9<td>&nbsp;<td align=right>30.5<td>&nbsp;<td align=right>648<td>&nbsp;<td align=right>864<td>&nbsp;<td>&nbsp;
<tr>	<td colspan=13><hr>
<tr><th colspan=13>ISO standard
<tr>	<td colspan=13><hr>
<tr>	<td>a0
	<td>&nbsp;<td align=right>33.1<td>&nbsp;<td align=right>46.8<td>&nbsp;<td align=right>84.0<td>&nbsp;<td align=right>118.8<td>&nbsp;<td align=right>2380<td>&nbsp;<td align=right>3368<td>&nbsp;<td>&nbsp;
<tr>	<td>a1
	<td>&nbsp;<td align=right>23.4<td>&nbsp;<td align=right>33.1<td>&nbsp;<td align=right>59.4<td>&nbsp;<td align=right>84.0<td>&nbsp;<td align=right>1684<td>&nbsp;<td align=right>2380<td>&nbsp;<td>&nbsp;
<tr>	<td>a2
	<td>&nbsp;<td align=right>16.5<td>&nbsp;<td align=right>23.4<td>&nbsp;<td align=right>42.0<td>&nbsp;<td align=right>59.4<td>&nbsp;<td align=right>1190<td>&nbsp;<td align=right>1684<td>&nbsp;<td>&nbsp;
<tr>	<td>a3
	<td>&nbsp;<td align=right>11.7<td>&nbsp;<td align=right>16.5<td>&nbsp;<td align=right>29.7<td>&nbsp;<td align=right>42.0<td>&nbsp;<td align=right>842<td>&nbsp;<td align=right>1190<td>&nbsp;<td>&nbsp;
<tr>	<td>a4
	<td>&nbsp;<td align=right>8.3<td>&nbsp;<td align=right>11.7<td>&nbsp;<td align=right>21.0<td>&nbsp;<td align=right>29.7<td>&nbsp;<td align=right>595<td>&nbsp;<td align=right>842<td>&nbsp;<td>&nbsp;
<tr>	<td>a4small
	<td>&nbsp;<td align=right>8.3<td>&nbsp;<td align=right>11.7<td>&nbsp;<td align=right>21.0<td>&nbsp;<td align=right>29.7<td>&nbsp;<td align=right>595<td>&nbsp;<td align=right>842<td>&nbsp;<td>&nbsp;
<tr>	<td>a5
	<td>&nbsp;<td align=right>5.8<td>&nbsp;<td align=right>8.3<td>&nbsp;<td align=right>14.9<td>&nbsp;<td align=right>21.0<td>&nbsp;<td align=right>421<td>&nbsp;<td align=right>595<td>&nbsp;<td>&nbsp;
<tr>	<td>a6
	<td>&nbsp;<td align=right>4.1<td>&nbsp;<td align=right>5.8<td>&nbsp;<td align=right>10.5<td>&nbsp;<td align=right>14.9<td>&nbsp;<td align=right>297<td>&nbsp;<td align=right>421<td>&nbsp;<td>&nbsp;
<tr>	<td>a7
	<td>&nbsp;<td align=right>2.9<td>&nbsp;<td align=right>4.1<td>&nbsp;<td align=right>7.4<td>&nbsp;<td align=right>10.5<td>&nbsp;<td align=right>210<td>&nbsp;<td align=right>297<td>&nbsp;<td>&nbsp;
<tr>	<td>a8
	<td>&nbsp;<td align=right>2.1<td>&nbsp;<td align=right>2.9<td>&nbsp;<td align=right>5.2<td>&nbsp;<td align=right>7.4<td>&nbsp;<td align=right>148<td>&nbsp;<td align=right>210<td>&nbsp;<td>&nbsp;
<tr>	<td>a9
	<td>&nbsp;<td align=right>1.5<td>&nbsp;<td align=right>2.1<td>&nbsp;<td align=right>3.7<td>&nbsp;<td align=right>5.2<td>&nbsp;<td align=right>105<td>&nbsp;<td align=right>148<td>&nbsp;<td>&nbsp;
<tr>	<td>a10
	<td>&nbsp;<td align=right>1.0<td>&nbsp;<td align=right>1.5<td>&nbsp;<td align=right>2.6<td>&nbsp;<td align=right>3.7<td>&nbsp;<td align=right>74<td>&nbsp;<td align=right>105<td>&nbsp;<td>&nbsp;
<tr>	<td>isob0
	<td>&nbsp;<td align=right>39.4<td>&nbsp;<td align=right>55.7<td>&nbsp;<td align=right>100.0<td>&nbsp;<td align=right>141.4<td>&nbsp;<td align=right>2836<td>&nbsp;<td align=right>4008<td>&nbsp;<td>&nbsp;
<tr>	<td>isob1
	<td>&nbsp;<td align=right>27.8<td>&nbsp;<td align=right>39.4<td>&nbsp;<td align=right>70.7<td>&nbsp;<td align=right>100.0<td>&nbsp;<td align=right>2004<td>&nbsp;<td align=right>2836<td>&nbsp;<td>&nbsp;
<tr>	<td>isob2
	<td>&nbsp;<td align=right>19.7<td>&nbsp;<td align=right>27.8<td>&nbsp;<td align=right>50.0<td>&nbsp;<td align=right>70.7<td>&nbsp;<td align=right>1418<td>&nbsp;<td align=right>2004<td>&nbsp;<td>&nbsp;
<tr>	<td>isob3
	<td>&nbsp;<td align=right>13.9<td>&nbsp;<td align=right>19.7<td>&nbsp;<td align=right>35.3<td>&nbsp;<td align=right>50.0<td>&nbsp;<td align=right>1002<td>&nbsp;<td align=right>1418<td>&nbsp;<td>&nbsp;
<tr>	<td>isob4
	<td>&nbsp;<td align=right>9.8<td>&nbsp;<td align=right>13.9<td>&nbsp;<td align=right>25.0<td>&nbsp;<td align=right>35.3<td>&nbsp;<td align=right>709<td>&nbsp;<td align=right>1002<td>&nbsp;<td>&nbsp;
<tr>	<td>isob5
	<td>&nbsp;<td align=right>7.0<td>&nbsp;<td align=right>9.8<td>&nbsp;<td align=right>17.7<td>&nbsp;<td align=right>25.0<td>&nbsp;<td align=right>501<td>&nbsp;<td align=right>709<td>&nbsp;<td>&nbsp;
<tr>	<td>c0
	<td>&nbsp;<td align=right>36.1<td>&nbsp;<td align=right>51.1<td>&nbsp;<td align=right>91.7<td>&nbsp;<td align=right>129.7<td>&nbsp;<td align=right>2600<td>&nbsp;<td align=right>3677<td>&nbsp;<td>&nbsp;
<tr>	<td>c1
	<td>&nbsp;<td align=right>25.5<td>&nbsp;<td align=right>36.1<td>&nbsp;<td align=right>64.8<td>&nbsp;<td align=right>91.7<td>&nbsp;<td align=right>1837<td>&nbsp;<td align=right>2600<td>&nbsp;<td>&nbsp;
<tr>	<td>c2
	<td>&nbsp;<td align=right>18.0<td>&nbsp;<td align=right>25.5<td>&nbsp;<td align=right>45.8<td>&nbsp;<td align=right>64.8<td>&nbsp;<td align=right>1298<td>&nbsp;<td align=right>1837<td>&nbsp;<td>&nbsp;
<tr>	<td>c3
	<td>&nbsp;<td align=right>12.8<td>&nbsp;<td align=right>18.0<td>&nbsp;<td align=right>32.4<td>&nbsp;<td align=right>45.8<td>&nbsp;<td align=right>918<td>&nbsp;<td align=right>1298<td>&nbsp;<td>&nbsp;
<tr>	<td>c4
	<td>&nbsp;<td align=right>9.0<td>&nbsp;<td align=right>12.8<td>&nbsp;<td align=right>22.9<td>&nbsp;<td align=right>32.4<td>&nbsp;<td align=right>649<td>&nbsp;<td align=right>918<td>&nbsp;<td>&nbsp;
<tr>	<td>c5
	<td>&nbsp;<td align=right>6.4<td>&nbsp;<td align=right>9.0<td>&nbsp;<td align=right>16.2<td>&nbsp;<td align=right>22.9<td>&nbsp;<td align=right>459<td>&nbsp;<td align=right>649<td>&nbsp;<td>&nbsp;
<tr>	<td>c6
	<td>&nbsp;<td align=right>4.5<td>&nbsp;<td align=right>6.4<td>&nbsp;<td align=right>11.4<td>&nbsp;<td align=right>16.2<td>&nbsp;<td align=right>323<td>&nbsp;<td align=right>459<td>&nbsp;<td>&nbsp;
<tr>	<td colspan=13><hr>
<tr><th colspan=13>JIS standard
<tr>	<td colspan=13><hr>
<tr>	<td>jisb0
	<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td align=right>103.0<td>&nbsp;<td align=right>145.6<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td>&nbsp;
<tr>	<td>jisb1
	<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td align=right>72.8<td>&nbsp;<td align=right>103.0<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td>&nbsp;
<tr>	<td>jisb2
	<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td align=right>51.5<td>&nbsp;<td align=right>72.8<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td>&nbsp;
<tr>	<td>jisb3
	<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td align=right>36.4<td>&nbsp;<td align=right>51.5<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td>&nbsp;
<tr>	<td>jisb4
	<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td align=right>25.7<td>&nbsp;<td align=right>36.4<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td>&nbsp;
<tr>	<td>jisb5
	<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td align=right>18.2<td>&nbsp;<td align=right>25.7<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td>&nbsp;
<tr>	<td>jisb6
	<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td align=right>12.8<td>&nbsp;<td align=right>18.2<td>&nbsp;<td align=right><td>&nbsp;<td align=right><td>&nbsp;<td>&nbsp;
<tr>	<td colspan=13><hr>
<tr><th colspan=13>ISO/JIS switchable
<tr>	<td colspan=13><hr>
<tr>	<td>b0 (see * below)
<tr>	<td>b1 (see * below)
<tr>	<td>b2 (see * below)
<tr>	<td>b3 (see * below)
<tr>	<td>b4 (see * below)
<tr>	<td>b5 (see * below)
<tr>	<td colspan=13><hr>
<tr><th colspan=13>Other
<tr>	<td colspan=13><hr>
<tr>	<td>flsa
	<td>&nbsp;<td align=right>8.5<td>&nbsp;<td align=right>13.0<td>&nbsp;<td align=right>21.6<td>&nbsp;<td align=right>33.0<td>&nbsp;<td align=right>612<td>&nbsp;<td align=right>936<td>&nbsp;<td>U.S. foolscap
<tr>	<td>flse
	<td>&nbsp;<td align=right>8.5<td>&nbsp;<td align=right>13.0<td>&nbsp;<td align=right>21.6<td>&nbsp;<td align=right>33.0<td>&nbsp;<td align=right>612<td>&nbsp;<td align=right>936<td>&nbsp;<td>European foolscap
<tr>	<td>halfletter
	<td>&nbsp;<td align=right>5.5<td>&nbsp;<td align=right>8.5<td>&nbsp;<td align=right>14.0<td>&nbsp;<td align=right>21.6<td>&nbsp;<td align=right>396<td>&nbsp;<td align=right>612<td>&nbsp;<td>&nbsp;
</table>

<p>
*<em>Note:</em> Initially the B paper sizes are the ISO sizes, e.g.,
<b><tt>b0</tt></b> is the same as <b><tt>isob0</tt></b>.  Running the file
<b><tt>lib/jispaper.ps</tt></b> makes the B paper sizes be the JIS sizes,
e.g., <b><tt>b0</tt></b> becomes the same as <b><tt>jisb0</tt></b>.

<hr>

<h2><a name="X_font_mappings"></a>Appendix: X default font mappings</h2>

<h3><a name="Standard_X_server_fonts"></a>Standard X servers</h3>

<h4><a name="X_regular_fonts"></a>Regular fonts</h4>

<pre>    AvantGarde-Book:              -Adobe-ITC Avant Garde Gothic-Book-R-Normal--\n\
    AvantGarde-BookOblique:       -Adobe-ITC Avant Garde Gothic-Book-O-Normal--\n\
    AvantGarde-Demi:              -Adobe-ITC Avant Garde Gothic-Demi-R-Normal--\n\
    AvantGarde-DemiOblique:       -Adobe-ITC Avant Garde Gothic-Demi-O-Normal--\n\
    Bookman-Demi:                 -Adobe-ITC Bookman-Demi-R-Normal--\n\
    Bookman-DemiItalic:           -Adobe-ITC Bookman-Demi-I-Normal--\n\
    Bookman-Light:                -Adobe-ITC Bookman-Light-R-Normal--\n\
    Bookman-LightItalic:          -Adobe-ITC Bookman-Light-I-Normal--\n\
    Courier:                      -Adobe-Courier-Medium-R-Normal--\n\
    Courier-Bold:                 -Adobe-Courier-Bold-R-Normal--\n\
    Courier-BoldOblique:          -Adobe-Courier-Bold-O-Normal--\n\
    Courier-Oblique:              -Adobe-Courier-Medium-O-Normal--\n\
    Helvetica:                    -Adobe-Helvetica-Medium-R-Normal--\n\
    Helvetica-Bold:               -Adobe-Helvetica-Bold-R-Normal--\n\
    Helvetica-BoldOblique:        -Adobe-Helvetica-Bold-O-Normal--\n\
    Helvetica-Narrow:             -Adobe-Helvetica-Medium-R-Narrow--\n\
    Helvetica-Narrow-Bold:        -Adobe-Helvetica-Bold-R-Narrow--\n\
    Helvetica-Narrow-BoldOblique: -Adobe-Helvetica-Bold-O-Narrow--\n\
    Helvetica-Narrow-Oblique:     -Adobe-Helvetica-Medium-O-Narrow--\n\
    Helvetica-Oblique:            -Adobe-Helvetica-Medium-O-Normal--\n\
    NewCenturySchlbk-Bold:        -Adobe-New Century Schoolbook-Bold-R-Normal--\n\
    NewCenturySchlbk-BoldItalic:  -Adobe-New Century Schoolbook-Bold-I-Normal--\n\
    NewCenturySchlbk-Italic:      -Adobe-New Century Schoolbook-Medium-I-Normal--\n\
    NewCenturySchlbk-Roman:       -Adobe-New Century Schoolbook-Medium-R-Normal--\n\
    Palatino-Bold:                -Adobe-Palatino-Bold-R-Normal--\n\
    Palatino-BoldItalic:          -Adobe-Palatino-Bold-I-Normal--\n\
    Palatino-Italic:              -Adobe-Palatino-Medium-I-Normal--\n\
    Palatino-Roman:               -Adobe-Palatino-Medium-R-Normal--\n\
    Times-Bold:                   -Adobe-Times-Bold-R-Normal--\n\
    Times-BoldItalic:             -Adobe-Times-Bold-I-Normal--\n\
    Times-Italic:                 -Adobe-Times-Medium-I-Normal--\n\
    Times-Roman:                  -Adobe-Times-Medium-R-Normal--\n\
    ZapfChancery-MediumItalic:    -Adobe-ITC Zapf Chancery-Medium-I-Normal--
</pre>

<h4><a name="X_symbol_fonts"></a>Symbol fonts</h4>

<pre>    Symbol:                       -Adobe-Symbol-Medium-R-Normal--
</pre>

<h4><a name="X_dingbat_fonts"></a>Dingbat fonts</h4>

<pre>    ZapfDingbats:                 -Adobe-ITC Zapf Dingbats-Medium-R-Normal--
</pre>

<h3><a name="OpenWindows_fonts"></a>Sun OpenWindows</h3>

<p>
For Sun's X11/NeWS one can use the OpenWindows scalable fonts instead,
which gives good output for any point size.  In this environment, the
relevant section of the resource file should look like this:

<pre>Ghostscript.regularFonts: \
    AvantGarde-Book:              -itc-avantgarde-book-r-normal-- \n\
    AvantGarde-BookOblique:       -itc-avantgarde-book-o-normal-- \n\
    AvantGarde-Demi:              -itc-avantgarde-demi-r-normal-- \n\
    AvantGarde-DemiOblique:       -itc-avantgarde-demi-o-normal-- \n\
    Bembo:                        -monotype-bembo-medium-r-normal-- \n\
    Bembo-Bold:                   -monotype-bembo-bold-r-normal-- \n\
    Bembo-BoldItalic:             -monotype-bembo-bold-i-normal-- \n\
    Bembo-Italic:                 -monotype-bembo-medium-i-normal-- \n\
    Bookman-Demi:                 -itc-bookman-demi-r-normal-- \n\
    Bookman-DemiItalic:           -itc-bookman-demi-i-normal-- \n\
    Bookman-Light:                -itc-bookman-light-r-normal-- \n\
    Bookman-LightItalic:          -itc-bookman-light-i-normal-- \n\
    Courier:                      -itc-courier-medium-r-normal-- \n\
    Courier-Bold:                 -itc-courier-bold-r-normal-- \n\
    Courier-BoldOblique:          -itc-courier-bold-o-normal-- \n\
    Courier-Oblique:              -itc-courier-medium-o-normal-- \n\
    GillSans:                     -monotype-gill-medium-r-normal-sans- \n\
    GillSans-Bold:                -monotype-gill-bold-r-normal-sans- \n\
    GillSans-BoldItalic:          -monotype-gill-bold-i-normal-sans- \n\
    GillSans-Italic:              -monotype-gill-normal-i-normal-sans- \n\
    Helvetica:                    -linotype-helvetica-medium-r-normal-- \n\
    Helvetica-Bold:               -linotype-helvetica-bold-r-normal-- \n\
    Helvetica-BoldOblique:        -linotype-helvetica-bold-o-normal-- \n\
    Helvetica-Narrow:             -linotype-helvetica-medium-r-narrow-- \n\
    Helvetica-Narrow-Bold:        -linotype-helvetica-bold-r-narrow-- \n\
    Helvetica-Narrow-BoldOblique: -linotype-helvetica-bold-o-narrow-- \n\
    Helvetica-Narrow-Oblique:     -linotype-helvetica-medium-o-narrow-- \n\
    Helvetica-Oblique:            -linotype-helvetica-medium-o-normal-- \n\
    LucidaBright:                 -b&amp;h-lucidabright-medium-r-normal-- \n\
    LucidaBright-Demi:            -b&amp;h-lucidabright-demibold-r-normal-- \n\
    LucidaBright-DemiItalic:      -b&amp;h-lucidabright-demibold-i-normal-- \n\
    LucidaBright-Italic:          -b&amp;h-lucidabright-medium-i-normal-- \n\
    LucidaSans:                   -b&amp;h-lucida-medium-r-normal-sans- \n\
    LucidaSans-Bold:              -b&amp;h-lucida-bold-r-normal-sans- \n\
    LucidaSans-BoldItalic:        -b&amp;h-lucida-bold-i-normal-sans- \n\
    LucidaSans-Italic:            -b&amp;h-lucida-medium-i-normal-sans- \n\
    LucidaSans-Typewriter:        -b&amp;h-lucidatypewriter-medium-r-normal-sans- \n\
    LucidaSans-TypewriterBold:    -b&amp;h-lucidatypewriter-bold-r-normal-sans- \n\
    NewCenturySchlbk-BoldItalic:  -linotype-new century schoolbook-bold-i-normal-- \n\
    NewCenturySchlbk-Bold:        -linotype-new century schoolbook-bold-r-normal-- \n\
    NewCenturySchlbk-Italic:      -linotype-new century schoolbook-medium-i-normal-- \n\
    NewCenturySchlbk-Roman:       -linotype-new century schoolbook-medium-r-normal-- \n\
    Palatino-Bold:                -linotype-palatino-bold-r-normal-- \n\
    Palatino-BoldItalic:          -linotype-palatino-bold-i-normal-- \n\
    Palatino-Italic:              -linotype-palatino-medium-i-normal-- \n\
    Palatino-Roman:               -linotype-palatino-medium-r-normal-- \n\
    Rockwell:                     -monotype-rockwell-medium-r-normal-- \n\
    Rockwell-Bold:                -monotype-rockwell-bold-r-normal-- \n\
    Rockwell-BoldItalic:          -monotype-rockwell-bold-i-normal-- \n\
    Rockwell-Italic:              -monotype-rockwell-medium-i-normal-- \n\
    Times-Bold:                   -linotype-times-bold-r-normal-- \n\
    Times-BoldItalic:             -linotype-times-bold-i-normal-- \n\
    Times-Italic:                 -linotype-times-medium-i-normal-- \n\
    Times-Roman:                  -linotype-times-medium-r-normal-- \n\
    Utopia-Bold:                  -adobe-utopia-bold-r-normal-- \n\
    Utopia-BoldItalic:            -adobe-utopia-bold-i-normal-- \n\
    Utopia-Italic:                -adobe-utopia-regular-i-normal-- \n\
    Utopia-Regular:               -adobe-utopia-regular-r-normal-- \n\
    ZapfChancery-MediumItalic:    -itc-zapfchancery-medium-i-normal-- \n
Ghostscript.dingbatFonts: \
    ZapfDingbats:                 -itc-zapfdingbats-medium-r-normal--
Ghostscript.symbolFonts: \
    Symbol:                       --symbol-medium-r-normal--
</pre>

<!-- [2.0 end contents] ==================================================== -->

<!-- [3.0 begin visible trailer] =========================================== -->
<hr>

<p>
<small>Copyright &copy; 1996, 2000 Aladdin Enterprises.  All rights
reserved.</small>

<p>
<small>This file is part of AFPL Ghostscript.  See the
<a href="Public.htm">Aladdin Free Public License</a> (the "License") for
full details of the terms of using, copying, modifying, and redistributing
AFPL Ghostscript.</small>

<p>
<small>Ghostscript version 7.04, 31 January 2002

<!-- [3.0 end visible trailer] ============================================= -->

</body>
</html>