123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143 |
- /dts-v1/;
- #include "mt7620a.dtsi"
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
- / {
- compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
- model = "ZBT-APE522II";
- chosen {
- bootargs = "console=ttyS0,115200";
- };
- gpio-leds {
- compatible = "gpio-leds";
- sys1 {
- label = "zbt-ape522ii:green:sys1";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
- sys2 {
- label = "zbt-ape522ii:green:sys2";
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
- };
- sys3 {
- label = "zbt-ape522ii:green:sys3";
- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
- };
- sys4 {
- label = "zbt-ape522ii:green:sys4";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- wlan2g4 {
- label = "zbt-ape522ii:green:wlan2g4";
- gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
- };
- };
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
- };
- &gpio0 {
- status = "okay";
- };
- &gpio1 {
- status = "okay";
- };
- &gpio2 {
- status = "okay";
- };
- &gpio3 {
- status = "okay";
- };
- &spi0 {
- status = "okay";
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
- };
- };
- };
- ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
- };
- &wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
- };
- &pcie {
- status = "okay";
- };
- &pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
- };
- &pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled", "i2c", "uartf", "wdt";
- ralink,function = "gpio";
- };
- };
- };
|