|
@@ -1,49 +1,49 @@
|
|
|
-# libreCMC supported Hardware
|
|
|
+# LibreCMC hardware support criteria
|
|
|
|
|
|
-Officially supported devices generally fall into three categories : can easily
|
|
|
-be flashed from the stock firmware's web-ui, requires a tFTP flash or opening up
|
|
|
-the router. When choosing a router to use with libreCMC, please keep in mind the
|
|
|
-method which is required for the initial install of libreCMC.
|
|
|
+In order to be officially supported by LibreCMC a device must meet the
|
|
|
+following criteria:
|
|
|
|
|
|
-### Buffalo
|
|
|
-* [WZR-HP-G300NH](/WZR_HP_G300NH.md)
|
|
|
-* WHR-HP-G300NH
|
|
|
+1. The device hardware must run on open source code. Non-free drivers or
|
|
|
+ binary blobs are not allowed.
|
|
|
+2. LibreCMC must be installable from the stock firmware (ideally from the
|
|
|
+ provided web-ui).
|
|
|
+3. All of the device's model line should work with libreCMC. If v1 works, but
|
|
|
+ v2 or v3 doesn't then the model isn't officially supported.
|
|
|
+4. The project must be able to obtain the device for testing. If an issue pops
|
|
|
+ up, the development team must be able to replicate it on real hardware.
|
|
|
|
|
|
-### Netgear
|
|
|
+## LibreCMC supported wireless routers
|
|
|
|
|
|
-* [WNDR3800](/WNDR3800.md)
|
|
|
+| Brand/Model | CPU | WLAN Chip | WLAN 2.4GHz | WLAN 5GHz | ETH | RAM | Flash |
|
|
|
+| --- | --- | --- | --- | --- | --- | --- | --- |
|
|
|
+| [Buffalo WZR-HP-G300NH](/WZR_HP_G300NH.md) | AR9132 | AR9103 | b/g/n | - | 1000x4 | 64M | 32M |
|
|
|
+| [Netgear WNDR3800](/WNDR3800.md) | AR7161 | AR9220, AR9223 | b/g/n | a/n | 1000x4 | 128M | 16M |
|
|
|
+| [ThinkPenguin TPE-R1100](/TPE_R1100.md) | AR9331 | AR9331 | b/g/n | - | 100x1 | 64M | 16M |
|
|
|
+| [ThinkPenguin TPE-R1200](/TPE_R1200.md) | AR9331 | AR9331 | b/g/n | - | 100x2 | 128M | 16M |
|
|
|
|
|
|
-### TP-link
|
|
|
+## LibreCMC supported portable computers
|
|
|
|
|
|
-* [TL-MR3020 v1](/TL_MR3020.md)
|
|
|
-* [TL-WR741ND](/TL_WR741ND.md)
|
|
|
-* [TL-WR841ND](/TL_WR841ND.md)
|
|
|
-* [TL-WR842ND](/TL_WR842ND.md)
|
|
|
-* [TL-WR1043ND](/TL_WR1043ND.md)
|
|
|
+| Brand/Model | CPU | RAM | Flash |
|
|
|
+| --- | --- | --- | --- |
|
|
|
+| [Ben Nanonote](/Ben_Nanonote.md) | [JZ4720](https://web.archive.org/web/20110904201104/http://en.ingenic.cn/product.aspx?ID=60) | 32M | 2M |
|
|
|
|
|
|
-### ThinkPenguin
|
|
|
-* [TPE-NWIFIROUTER2](/TPE_NWIFIROUTER2.md)
|
|
|
-* [TPE-R1100](/TPE_R1100.md)
|
|
|
-* [TPE-R1200](/TPE_R1200.md)
|
|
|
+## LibreCMC unsupported / development devices
|
|
|
|
|
|
-### Qi-Hardware
|
|
|
+The following devices do not meet one or more of the criteria required for
|
|
|
+official support (see blocking items column in table below). Some of these are
|
|
|
+candidates for official support but require further development.
|
|
|
|
|
|
-* [Ben Nanonote](/Ben_Nanonote.md)
|
|
|
+| Brand/Model | CPU | WLAN Chip | WLAN 2.4GHz | WLAN 5GHz | ETH | RAM | Flash | Blocking Items | Comments |
|
|
|
+| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
|
|
|
+| TP-Link TL-WDR4300 | AR9344 | AR9344,AR9580 | b/g/n | a/n | 1000x5 | 128M | 8M | 2 | Footnote [3] |
|
|
|
+| [TP-Link TL-MR3020](/TL_MR3020.md) | AR9331 | AR9331 | b/g/n | - | 100x1 | 32M | 4M | 3 | v1.x good. v3.x non-free |
|
|
|
+| D-Link DGL-5500 | QCA9558 | - | - | - | 1000x5 | 128M | 16M | 1,2 | Footnote [1] |
|
|
|
+| [TPE-NWIFIROUTER2](/TPE_NWIFIROUTER2.md) | AR9341 | ? | ? | ? | ? | 32M | 4M | 4 | Vendor no longer provides this model |
|
|
|
|
|
|
-## Tested Hardware
|
|
|
+Note: Other targets may work; we are **NOT** responsible for **ANY** _bricked_ devices.
|
|
|
|
|
|
-[List of tested hardware](/List_of_Tested_Hardware.md)
|
|
|
+[1] Ships with non-free wifi card, but can be replaced with a free one. Has a mini pci-e card slot.
|
|
|
|
|
|
-# libreCMC unofficially supported Hardware
|
|
|
+[2] Requires a tFTP server for flashing.
|
|
|
|
|
|
-### D-Link
|
|
|
-
|
|
|
-* DGL-5500 a1 : Ships with non-free wifi card, but can be replaced with a free one. Has a mini-pci-e card slot.
|
|
|
-
|
|
|
-#####Please note that other targets may work; we are **NOT** responsible for **ANY** _bricked_ devices.
|
|
|
-
|
|
|
-## Notes:
|
|
|
-
|
|
|
-[2] requires a tFTP server for flashing.
|
|
|
-
|
|
|
-[3] requires opening up the router / external hardware for initial install (serial cable, SPI flasher or both).
|
|
|
+[3] Requires opening up the router / external hardware for initial install (serial cable, SPI flasher or both).
|